如果您 自定义了新标签页(customized the new tab page),则每次加载可能需要一些时间。为了减少打开时间,您可以预加载新的标签页,以便在Edge浏览器中获得更快的体验。可以从边缘(Edge)设置面板、注册表编辑器(Registry Editor)和本地组策略编辑器(Local Group Policy Editor)启用或禁用新标签页功能的预加载。
可以在Edge(Edge)浏览器的新标签页上添加各种元素。但是,添加的内容越多,每次打开新标签时加载页面所需的时间就越多。有几种方法可以 在Windows 10上(Windows 10)加速 Edge 浏览器(speed up Edge browser),但如果您想比平时更快地加载新标签页,启用此功能可能会有很大帮助。
如何在Edge上启用(Edge)预加载(Preload)新标签页
要在Edge(Edge)上启用或禁用预加载(Preload)新标签页,请按照以下步骤操作 -
- 在 PC 上打开 Edge 浏览器。
- 单击三点图标并选择设置(Settings)。
- 切换到新标签页(New tab page)部分。
- 切换预加载新标签页以获得更快的体验(Preload the new tab page for a faster experience)按钮。
首先,在您的计算机上打开Edge浏览器,单击右上角可见的三点图标,然后 从列表中选择设置。(Settings)
接下来,您需要切换到 新标签页 (New tab page )部分并切换 预加载新标签页以在屏幕上显示更快的体验(Preload the new tab page for a faster experience) 按钮。
就这样。
使用注册表在(Registry)Edge上打开预加载(Preload)新标签页
要使用注册表在(Registry)Edge上打开预加载(Preload)新标签页,请执行以下步骤 -
- 按Win+R。
- 键入regedit并点击Enter按钮。
- 单击是(Yes)按钮。
- 在HKEY_LOCAL_MACHINE中导航到Microsoft。
- 右键单击Microsoft > New > Key。
- 将其命名为Edge。
- 右键单击Edge > New > DWORD (32-bit) Value。
- 将其命名为NewTabPagePrerenderEnabled。
- 双击它以将值(Value)数据设置为1。
- 单击确定(OK)按钮。
让我们详细检查这些步骤。
注意事项: (Precaution: )建议 在执行这些步骤之前创建一个系统还原点。
首先,按 Win+R 打开运行提示符,输入regedit
,然后按 Enter 按钮。之后,单击 UAC弹出窗口中的Yes 按钮。打开注册表编辑器(Registry Editor)后,导航到以下路径 -
HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft
如果您可以在 Microsoft密钥中找到(Microsoft) Edge 密钥 ,则无需执行第 5 步和第 6 步。否则,右键单击 Microsoft > New > Key,并将其命名为 Edge。
接下来,右键单击 Edge 并选择 New > DWORD (32-bit) Value。然后,将其命名为 NewTabPagePrerenderEnabled。
默认情况下,它带有 0 作为值(Value)数据。您需要将其更改为 1。为此,双击它,在框中输入 1 并单击 OK 按钮以保存更改。
如果您想关闭它,您可以删除NewTabPagePrerenderEnabled REG_DWORD值或将值(Value)数据设置为 0。
可以使用本地组策略编辑器在(Local Group Policy Editor)Edge浏览器上启用预加载(Preload)新标签页。但是,您必须 为 Edge 添加组策略模板。(Group Policy Templates for Edge)否则找不到下面提到的设置路径。
使用组策略在(Group Policy)Edge上启用预加载(Preload)新标签页
要使用组策略在(Group Policy)Edge上启用预加载(Preload)新标签页,请按照以下步骤操作 -
- 在任务栏搜索框中搜索gpedit.msc。
- 单击单个结果。
- 导航到计算机配置(Computer Configuration)中的启动、主页和新标签页(Startup, home page and new tab page)。
- 双击启用新标签页的预加载以加快渲染(Enable preload of the new tab page for faster rendering)设置。
- 选择启用( Enabled)选项。
- 单击确定(OK)按钮。
让我们详细研究这些步骤以了解更多信息。
首先,您必须在计算机上打开本地组策略编辑器(Local Group Policy Editor)。为此,gpedit.msc
在任务栏(Taskbar)搜索中搜索并单击单个结果。打开后,导航到以下路径-
Computer Configuration > Administrative Templates > Classic Administrative Templates > Microsoft Edge > Startup, home page and new tab page
在“ 启动”、“主页”和“新标签页”(Startup, home page and new tab page) 文件夹中,您可以找到名为“ 启用新标签页预加载”的设置,以便(Enable preload of the new tab page for faster rendering) 在右侧更快地呈现。默认情况下,它设置为 未配置(Not Configured)。您需要双击它并选择 启用 (Enabled )选项。
最后,单击 OK 按钮保存更改。
完成后,您可以通过在Edge(Edge)浏览器中打开edge://settings/newTabPage
页面来验证激活。如果切换按钮显示为灰色,则表示您已使用注册表编辑器(Registry Editor)或本地组策略编辑器(Local Group Policy Editor)更改了设置。此外,您可能会看到一条消息,提示 您的浏览器由您的组织管理(Your browser is managed by your organization)。
但是,此功能可能会导致您的 PC 出现CPU使用率过高的问题。如果发生这种情况,您可以按照以下步骤 修复Windows 10中的(Windows 10)Microsoft Edge 高内存或 CPU 使用率(fix Microsoft Edge high memory or CPU usage) 问题。另一方面,将设置更改为 Not Configured 将从Group Policy禁用此功能。
就这样!希望这可以帮助。
How to enable Preload New Tab page feature on Edge
If you have customized the new tab page, it might take some time to load it every time. To reduce the opening time, you can preload a new tab page for a faster experience in the Edge browser. It is possible to enable or disable the preload of the new tab page feature from the Edge settings panel, Registry Editor, and Local Group Policy Editor.
It is possible to add various elements on the new tab page in Edge browser. However, the more you add things, the more time it takes to load the page whenever you open a new tab. There are several ways to speed up Edge browser on Windows 10, but if you want to load the new tab page faster than usual, enabling this feature might help a lot.
How to enable Preload new tab page on Edge
To enable or disable Preload new tab page on Edge, follow these steps-
- Open the Edge browser on your PC.
- Click the three-dotted icon and select Settings.
- Switch to the New tab page section.
- Toggle the Preload the new tab page for a faster experience button.
At first, open the Edge browser on your computer, click the three-dotted icon visible on the top-right corner, and select the Settings from the list.
Next, you need to switch to the New tab page section and toggle the Preload the new tab page for a faster experience button visible on your screen.
That’s all.
Turn on Preload new tab page on Edge using Registry
To turn on Preload new tab page on Edge using Registry, follow these steps-
- Press Win+R.
- Type regedit and hit the Enter button.
- Click the Yes button.
- Navigate to Microsoft in HKEY_LOCAL_MACHINE.
- Right-click on Microsoft > New > Key.
- Name it as Edge.
- Right-click on Edge > New > DWORD (32-bit) Value.
- Name it as NewTabPagePrerenderEnabled.
- Double-click on it to set the Value data as 1.
- Click the OK button.
Let’s check out these steps in detail.
Precaution: It is recommended to create a System Restore point before heading to the steps.
First of all, press Win+R to open the Run prompt, type regedit
, and hit the Enter button. Following that, click on the Yes button in the UAC popup window. Once the Registry Editor is opened, navigate to the following path-
HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft
If you can find the Edge key inside the Microsoft key, you do not have to follow the 5th and 6th steps. Otherwise, right-click on Microsoft > New > Key, and name it as Edge.
Next, right-click on Edge and select New > DWORD (32-bit) Value. Then, name it as NewTabPagePrerenderEnabled.
By default, it comes with 0 as the Value data. You need to change it to 1. For that, double-click on it, enter 1 in the box and click the OK button to save the change.
In case you want to turn it off, you can either delete the NewTabPagePrerenderEnabled REG_DWORD value or set the Value data as 0.
It is possible to enable Preload new tab page on the Edge browser using the Local Group Policy Editor. However, you must have Group Policy Templates for Edge added. Otherwise, you cannot find the setting path mentioned below.
Enable Preload new tab page on Edge using Group Policy
To enable Preload new tab page on Edge using Group Policy, follow these following steps-
- Search for gpedit.msc in the Taskbar search box.
- Click on the individual result.
- Navigate to Startup, home page and new tab page in Computer Configuration.
- Double-click on Enable preload of the new tab page for faster rendering setting.
- Select the Enabled option.
- Click the OK button.
Let’s delve into these steps in detail to know more.
At first, you have to open the Local Group Policy Editor on your computer. For that, search for gpedit.msc
in the Taskbar search and click on the individual result. Once it is opened, navigate to the following path-
Computer Configuration > Administrative Templates > Classic Administrative Templates > Microsoft Edge > Startup, home page and new tab page
In the Startup, home page and new tab page folder, you can find a setting called Enable preload of the new tab page for faster rendering on your right-hand side. By default, it is set as Not Configured. You need to double-click on it and select the Enabled option.
At last, click the OK button to save the change.
Once done, you can verify the activation by opening edge://settings/newTabPage
page in the Edge browser. If the toggle button is grayed out, it means you have changed the setting using Registry Editor or Local Group Policy Editor. Also, you might see a message saying Your browser is managed by your organization.
However, this functionality can cause a high CPU usage problem on your PC. If that happens, you can follow these steps to fix Microsoft Edge high memory or CPU usage issue in Windows 10. On the other hand, changing the setting to Not Configured will disable this feature from Group Policy.
That’s all! Hope this helps.