每当您连接到无线网络时,您要么连接到专用(Private)网络,要么连接到公共(Public)网络。专用(Private)网络是指您信任所有其他可用设备连接的家庭或工作网络,而公共网络则位于其他任何地方,例如咖啡店等。根据您的连接,Windows确定网络。您的网络连接决定了您的 PC 将如何与同一网络上的其他人进行交互。
这里需要注意的重要一点是,每当您第一次连接时,Windows都会弹出一个框,显示您选择公共或专用网络的选项。在这种情况下,有时您会不小心选择了错误的标签,这可能会导致您的设备出现安全问题。因此,始终有必要根据您的要求配置网络。因此,不要浪费任何时间,让我们在下面列出的指南的帮助下看看如何(How)在Windows 10中更改网络配置文件。(Change Network Profile)
在Windows 10中从(Windows 10)公共(Public)网络更改为专用网络(Private Network)
确保 创建一个还原点(create a restore point) 以防万一出现问题。
方法 1:在 Windows 10 上更改网络配置文件(Method 1: Change Network Profile on Windows 10)
在开始配置步骤之前,我们需要识别Windows 10中的当前网络类型。如果您不知道系统上的网络连接,则需要按照以下步骤操作。
1. 检查您在Windows 10中的(Windows 10)网络类型(Network Type)
2. 您需要导航到Settings > Network & Internet
3. 单击“网络(Network)和Internet ”选项后,您将看到另一个窗口,您需要单击屏幕侧边栏上的“状态”(Status)选项。
在上图中,您可以看到公共网络(public network)正在显示。由于这是家庭网络,因此应将其更改为专用网络。
在 Windows 10 中从公共网络更改为专用网络(Change from Public to Private Network in Windows 10)
1. 为了将网络类型从Public更改为Private(或Vice Versa),您需要保持在同一个Network & Internet窗口中。在窗口的侧边栏上,您需要找出网络连接(以太网、Wi-Fi、拨号)。(Network connection (Ethernet, Wi-Fi, Dial-up).)
2.这里根据当前图像,我们选择了当前网络连接:Wi-Fi(current network connection: Wi-Fi)
3. 由于微软(Microsoft)不断在Windows中添加新功能,因此这些提示和屏幕截图参考了(Windows)Windows的最新版本。
4. 选择当前网络连接后,您将看到一个新窗口,其中包含选择专用或公共网络的选项。( choose Private or Public Network.)
5. 现在您可以根据自己的喜好选择专用网络或公共网络(choose either Private or Public Network),然后关闭设置选项卡或返回并确认连接选项卡上的更改状态。
方法 2:在 Windows 7 上更改网络配置文件(Method 2: Change Network Profile on Windows 7)
对于Windows 7,您必须按照以下步骤来识别和更改系统的网络配置文件。
1.从开始菜单导航到控制面板(control panel),然后单击“网络和共享中心(Network & Sharing center)”
2. 在网络(Network)和共享(Sharing)选项卡下,您将在“查看您的活动网络(View Your Active Networks)”选项卡下看到您的活动网络连接。
3.单击网络配置文件(Click on the network profile),系统将提示您选择适当的网络。Windows 7 正确解释了每个网络的功能,以便您可以仔细阅读,然后为您的连接选择正确的网络类型。
方法 3:使用本地安全策略更改网络配置文件(Method 3: Change Network Profile using Local Security Policy)
如果您无法使用上述两种方法,您可以选择使用本地安全策略 ( Local Security Policy. )在Windows 10中从(Windows 10)公共(Public)网络更改为专用网络。(Private Network)这种方法通常是系统管理员的最佳方法。使用此方法,您可以强制系统使用特定的网络类型而忽略其选择。
1. 按Windows + R打开运行对话框(Run Dialog)。
2.输入secpol.msc 并按回车键打开本地安全策略(Local Security Policy)。
3. 在本地安全策略(Local Security Policy)下,您需要点击左侧栏的“网络列表管理策略”。(Network List Manager Policies)然后单击屏幕右侧面板上的可用网络连接类型。
4. 现在您需要在位置(Location)类型选项卡下选择专用或公共网络选项。(choose the Private or Public network)
此外,您有权通过选择“用户不能更改位置(User cannot change location)”选项来限制用户更改网络类型。您也可以使用此方法覆盖用户对网络类型的选择。
5. 最后点击“确定”( “Ok”)保存您所做的所有更改。
希望上述方法能帮助您为您的设备选择最合适的网络类型。选择正确的网络类型以确保系统连接安全非常重要。第三种方法对系统管理员基本有用。但是,如果您无法使用前两种方法更改网络类型,您也可以使用第三种方法更改网络配置文件。(Network Profile)
受到推崇的:(Recommended:)
我希望上述步骤对您有所帮助,现在您可以轻松地 在 Windows 10 中从公共网络更改为专用网络,(change from Public to Private Network in Windows 10)但如果您对本教程仍有任何疑问,请随时在评论部分提出。
Change from Public to Private Network in Windows 10
Whenever you cоnnect to a wirelеss network, either you connect on Private network or Public network. Private nеtwоrk refers to your home or work network where уou trust all thе other aνailable devices to be connected while publiс networks are anywhere else, such as coffee shops, etc. Depending on your connection, Windows determine the network. Your network connеction determines how yоur PC will interact with others on the same network.
Here the important point to note is that whenever you first time connects, Windows pops up a box showing you options to choose a public or private network. In that case, sometimes you accidentally choose the wrong label, which can cause security issues for your device. Therefore, it is always necessary to configure the network as per your requirement. So without wasting any time, let’s see How to Change Network Profile in Windows 10 with the help of the below-listed guide.
Change from Public to Private Network in Windows 10
Make sure to create a restore point just in case something goes wrong.
Method 1: Change Network Profile on Windows 10
Much before starting the configuration steps, we need to identify the current network type in Windows 10. If you are unaware of the network connection on your system, you need to follow the below-mentioned steps.
1. Check your Network Type in Windows 10
2. You need to navigate to Settings > Network & Internet
3. Once you will click on the Network & Internet option, you will see another window where you need to click on the Status option available on the screen’s sidebar.
Here on the above image, you can see that the public network is showing. Since this is the home network, it should be changed to the private network.
Change from Public to Private Network in Windows 10
1. In order to change the network type from Public to Private (or Vice Versa), you need to remain on the same Network & Internet window. On the sidebar of the window, you need to find out the Network connection (Ethernet, Wi-Fi, Dial-up).
2. Here as per current image, we have selected current network connection: Wi-Fi
3. Since Microsoft keeps on adding a new feature in Windows, these tips and screenshots reference the most updated version of the Windows.
4. Once you select the current network connection, you will see a new window with options to choose Private or Public Network.
5. Now you can choose either Private or Public Network according to your preference and close the setting tab or go back and confirm the status of a change on the connection tab.
Method 2: Change Network Profile on Windows 7
When it comes to Windows 7, you have to follow the below-mentioned steps to identify and change your system’s network profile.
1. Navigate to control panel from the start menu and click on the “Network & Sharing center”
2. Under the Network & Sharing tab, you will see your active network connection under “View Your Active Networks” tab.
3. Click on the network profile where you will be prompted to choose the appropriate network. Windows 7 explains each network’s feature properly so that you can read it carefully and then choose the right network type for your connection.
Method 3: Change Network Profile using Local Security Policy
If you cannot use the above mentioned two methods, you have another option to Change from Public to Private Network in Windows 10 by using Local Security Policy. This method is usually the best method for the administrator of the system. With this method, you can force the system to a particular network type and disregard its choice.
1. Press Windows + R to open Run Dialog box.
2. Type secpol.msc and press enter to open Local Security Policy.
3. Under the Local Security Policy, you need to tap on the “Network List Manager Policies” on the left sidebar. Then click on the available network connection type on the right-side panel on your screen.
4. Now you need to choose the Private or Public network option under the Location type tab.
Moreover, you have the authority to restrict the users to make the changes in the network type by selecting the option “User cannot change location”. You can override the users’ selection of the network type as well with this method.
5. Finally click on “Ok” to save all the changes you have made.
Hopefully, the above-mentioned method will help you to choose the most appropriate network type for your device. It is really important to choose the right network type to keep your system connection secured. The third method is basically useful for the system administrator. However, in case you are not able to change the network type by using the first two methods, you can change the Network Profile by using the third method as well.
Recommended:
I hope the above steps were helpful and now you can easily change from Public to Private Network in Windows 10 but if you still have any questions regarding this tutorial then feel free to ask them in the comment’s section.