触觉在Apple Watch(Apple Watch)中起着至关重要的作用。这些微小的敲击和振动不仅会提醒您有来电和短信,而且当您与智能手表互动时,它们还会提供宝贵的反馈。
但是,如果您的Apple Watch没有像往常一样振动,请尝试通过修复程序来解决问题。
1.检查您的电话和消息通知设置(Messages Notification Settings)
默认情况下,Apple Watch会镜像 iPhone 上的通知设置,用于来电和短信提醒。因此,请确保您的 iOS 设备设置为振动或为您的智能手表设置自定义通知。
在 iPhone 上
启用电话和消息振动(Message Vibrations)
1. 打开 iPhone 上的设置(Settings)应用程序。
2. 向下滚动并点击电话。
3.Tap Notifications > Vibrations > Sounds。
4. 选择一个振动(例如,同步(Synchronized)、重音(Accent)、警报(Alert)等)。
5.返回(Head)主设置(Settings)屏幕并点击消息。
6. 重复步骤 3-4。
(Set Up Custom Notifications)为Apple Watch设置自定义通知
如果您希望Apple Watch独立于 iPhone 振动,您必须设置自定义通知。
1. 在 iPhone 上打开Watch应用程序。
2. 向下滚动以显示(Scroll)Apple Watch上的应用程序列表。
3. 点击电话。
4. 从镜像切换到自定义。
5. 确保Haptic旁边的开关在(Haptic)Alerts和Ringtone部分
下处于活动状态。
6.返回(Head)上一个屏幕并点击消息。
7. 从Mirror切换到Custom并激活(Custom)Haptic旁边的开关。
2.检查其他应用程序的触觉设置(Apps)
如果您的Apple Watch未能针对任何其他与应用程序相关的提醒进行振动(例如,当您收到来自Mail的(Mail)VIP消息时),请在您的 iPhone 上打开Watch应用程序,找到并轻点该应用程序,并确保所有 Haptic 通知都处于活动状态.
3.解决(Troubleshoot Connection)与 iPhone
的连接问题
如果您的Apple Watch不仅会振动来电和短信,而且无法显示视觉提醒和声音,请在表盘顶部寻找红色 iPhone 符号。这表示与您的Apple Watch的连接断开。
要将Apple Watch重新连接到 iPhone:
禁用飞行模式 — 打开(Airplane Mode — Open)控制中心(Control Center)(从表盘底部向上滑动),向下滚动并确保飞行模式(Airplane Mode)图标处于非活动状态。
启用蓝牙 — 按下(Bluetooth — Press)Digital Crown并点击Settings > Bluetooth。然后,确保蓝牙(Bluetooth)旁边的开关处于活动状态。
如果您的Apple Watch无法连接到您的 iPhone,请尝试这些额外的修复来解决问题。
4.禁用勿扰模式
请勿打扰模式(Do Not Disturb Mode)是阻止Apple Watch提醒您来电和通知的另一个原因。如果您在表盘顶部看到月亮形的请勿打扰符号,请打开(Disturb)控制中心(Control Center)并点击请勿打扰(Disturb)符号以禁用它。
此外,打开 iPhone 上的控制中心(Control Center)(从屏幕右上角向下滑动)并确认“请勿打扰”模式(Disturb Mode)未激活。
5. 检查Apple Watch上的触觉设置(Apple Watch)
如果您的Apple Watch继续无法振动来电和短信,或者您在旋转(Apple Watch)Digital Crown或系统软件中的各种用户元素时没有收到任何触觉反馈,请查看Apple Watch的触觉设置。
1.在您的 iPhone 上
打开Watch应用,然后点击设置。(Watch)
2.向下滚动(Scroll)并点击声音(Sounds)和触觉(Haptics)。
3. 激活以下设置:
- Haptic Alerts:确定 Apple Watch 是否在(Apple Watch)您收到Apple Watch上的提醒时振动。如果您想增加触觉强度,请
从默认切换到突出。(Default)
- Crown Haptics:旋转Digital Crown时(Digital Crown)提供(Provides)触觉反馈。
- 系统触觉:当您与系统软件交互时
提供触觉反馈(例如,在屏幕键盘上打字)。(Provides)
6.重启Apple Watch
由于系统软件出现故障,您的Apple Watch可能会停止振动。(Apple Watch)重新启动设备并检查是否可以解决问题。
1. 按住侧边按钮。
2.向右
拖动关机滑块。(Power Off)
3.等待(Wait)30 秒并按住侧边(Side)按钮,直到看到Apple标志。
7. 更新 Apple Watch
运行过时版本的 watchOS 也会导致许多问题。检查并安装任何未完成的更新,看看是否有所作为。
1. 将Apple Watch放在磁性充电器上。
2.在您的 iPhone 上
打开Watch应用程序。(Watch)
3.Tap General > Software Update。如果您看到有待更新的更新,请点击下载(Download)并安装(Install)。
如果您想在没有 iPhone 的情况下更新Apple Watch,首先将 watchOS 设备连接到Wi-Fi热点(打开控制中心(Control Center)并长按Wi-Fi以显示可用无线网络列表)。然后,按下Digital Crown并选择Settings > General > Software Update > Download并安装(Install)。
8.擦除Apple Watch(Apple Watch)上的所有内容
将 Apple Watch 恢复出厂设置(Factory resetting your Apple Watch)可以消除导致 watchOS 设备振动的潜在软件相关问题。您不会丢失任何数据,因为iPhone在重置过程中
会自动备份您的 Apple Watch 。(iPhone automatically backs up your Apple Watch)
1. 在 iPhone 上打开Watch应用,然后点击我的手表(My Watch)。
2. 点击屏幕左上角的所有手表(Watches)。
3. 选择Apple Watch旁边的信息(Info)图标。
4,Tap Unpair Apple Watch > Reset [你的名字] Apple Watch。
5.等到(Wait)您的 iPhone 重置您的Apple Watch。
6.将 Apple Watch 与您的 iPhone 配对(Pair the Apple Watch with your iPhone)并恢复您的数据。
9. 联系苹果支持
如果上述修复均无济于事,您必须联系 Apple 支持(contact Apple Support)。您的Apple Watch(Apple Watch)上的Taptic Engine可能存在故障,因此您需要前往当地的Genius Bar或Apple Store 商店(Apple Store)。
Apple Watch Not Vibrating? Try These 9 Fixes
Haptics play a vital role in the Apрle Watch. Not оnly do those tiny taps and vibrations alert you to incoming calls and text messаges, but they also provide invalυable feedback as you interact with yoυr smartwatсh.
However, if your Apple Watch doesn’t vibrate as usual, try troubleshooting the issue by working your way through the fixes.
1. Check Your Phone and Messages Notification Settings
By default, the Apple Watch mirrors the notification settings on the iPhone for calls and text alerts. So, make sure that your iOS device is set to vibrate or set up custom notifications for your smartwatch.
Enable Phone and Message Vibrations on iPhone
1. Open the Settings app on your iPhone.
2. Scroll down and tap Phone.
3. Tap Notifications > Vibrations > Sounds.
4. Pick a vibration (e.g., Synchronized, Accent, Alert, etc.).
5. Head back to the main Settings screen and tap Messages.
6. Repeat steps 3–4.
Set Up Custom Notifications for Apple Watch
If you want your Apple Watch to vibrate independent of your iPhone, you must set up custom notifications.
1. Open the Watch app on your iPhone.
2. Scroll down to reveal a list of apps on your Apple Watch.
3. Tap Phone.
4. Switch from Mirror to Custom.
5. Ensure that the switches next to Haptic are active under the Alerts and Ringtone sections.
6. Head back to the previous screen and tap Messages.
7. Switch from Mirror to Custom and activate the switch next to Haptic.
2. Check Haptic Settings for Other Apps
If your Apple Watch fails to vibrate for any other app-related alerts (e.g., when you receive a VIP message from Mail), open the Watch app on your iPhone, locate and tap the app, and make sure that any Haptic notifications are active.
3. Troubleshoot Connection With iPhone
If your Apple Watch is not only vibrating for calls and texts but also fails to display visual alerts and sounds, look for a red iPhone symbol at the top of the watch face. That denotes a broken connection to your Apple Watch.
To reconnect your Apple Watch to your iPhone:
Disable Airplane Mode — Open the Control Center (swipe up from the bottom of the watch face), scroll down, and ensure that the Airplane Mode icon is inactive.
Enable Bluetooth — Press the Digital Crown and tap Settings > Bluetooth. Then, ensure that the switch next to Bluetooth is active.
If your Apple Watch fails to make a connection to your iPhone, try these additional fixes to troubleshoot the issue.
4. Disable Do Not Disturb Mode
Do Not Disturb Mode is another reason that can prevent your Apple Watch from alerting you to incoming phone calls and notifications. If you see the moon-shaped Do Not Disturb symbol at the top of the watch face, open the Control Center and tap the Do Not Disturb symbol to disable it.
Also, open the Control Center on your iPhone (swipe down from the top-right of the screen) and confirm that Do Not Disturb Mode is not active.
5. Check Your Haptic Settings on Apple Watch
If your Apple Watch continues to fail to vibrate for calls and texts, or you don’t receive any haptic feedback while rotating the Digital Crown or the various user elements within the system software, review the haptic settings for your Apple Watch.
1. Open the Watch app on your iPhone and tap Settings.
2. Scroll down and tap Sounds & Haptics.
3. Activate the settings below:
- Haptic Alerts: Determines if your Apple Watch vibrates when you receive an alert on your Apple Watch. Switch from Default to Prominent if you want to increase the haptic strength.
- Crown Haptics: Provides haptic feedback when rotating the Digital Crown.
- System Haptics: Provides haptic feedback when you interact with the system software (e.g., typing on the onscreen keyboard).
6. Restart Apple Watch
Your Apple Watch can stop vibrating due to glitches in the system software. Restart the device and check if that fixes the problem.
1. Press and hold the Side button.
2. Drag the Power Off slider to the right.
3. Wait for 30 seconds and hold down the Side button until you see the Apple logo.
7. Update Apple Watch
Running an outdated version of watchOS can also result in numerous issues. Check for and install any outstanding updates and see if that makes a difference.
1. Place the Apple Watch on its magnetic charger.
2. Open the Watch app on your iPhone.
3. Tap General > Software Update. If you see a pending update, tap Download and Install.
If you want to update your Apple Watch without your iPhone, start by connecting your watchOS device to a Wi-Fi hotspot (open the Control Center and long-press Wi-Fi to bring up a list of available wireless networks). Then, press the Digital Crown, and select Settings > General > Software Update > Download and Install.
8. Erase All Contents on Apple Watch
Factory resetting your Apple Watch can eliminate underlying software-related issues preventing the watchOS device from vibrating. You will not lose any data since the iPhone automatically backs up your Apple Watch during the reset procedure.
1. Open the Watch app on your iPhone and tap My Watch.
2. Tap All Watches at the top left of the screen.
3. Select the Info icon next to your Apple Watch.
4, Tap Unpair Apple Watch > Reset [Your Name’s] Apple Watch.
5. Wait until your iPhone resets your Apple Watch.
6. Pair the Apple Watch with your iPhone and restore your data.
9. Contact Apple Support
If none of the fixes above help, you must contact Apple Support. You’re likely dealing with a faulty Taptic Engine on your Apple Watch that warrants a visit to the local Genius Bar or Apple Store.