(Apple Watches)当连接到充电器时，Apple Watch会发出提示音或叮当声并显示充电符号。如果您的手表在充电时不断发出蜂鸣声或叮当声，则可能是您的充电配件(problem with your charging accessories)或电源出现问题。
我们将向您展示如何让您的 Apple Watch 正确充电(get your Apple Watch to charge correctly)并避免充电器发出叮当声。本教程中的故障排除步骤适用于所有Apple Watch系列或型号。
1. 重新连接充电线(Charging Cable)和适配器(Adapter)
如果磁力充电线(Magnetic Charging Cable)或底座(Dock)与电源适配器的连接松动，
您的Apple Watch在充电时可能会反复发出叮当声。(Apple Watch)
确保充电座、充电线或底座完全插入电源适配器。另外，请确保电源适配器完全插入墙壁插座或电源板。
2. 取下 Apple Watch 外壳
在Apple Watch(Apple Watch)上使用保护配件可以为您节省数百美元的维修费用(save you hundreds of dollars in repair costs)。但是，某些保护壳可能会干扰触摸输入和滑动手势(can interfere with touch input and swipe gestures)。厚的(Thick)或“坚固”的表壳也会阻止您的Apple Watch咬到磁力充电线(Magnetic Charging Cable)的表面。
如果您的Apple Watch有保护壳，请将其取下并检查充电时是否不会出现反复叮当作响的情况。如果您必须使用保护壳(a protective case)，请购买一个不能覆盖手表陶瓷后盖的保护壳。
3. 重新调整您的 Apple Watch
Apple Watch可吸附到(Apple Watches)磁性充电线(Magnetic Charging Cables)的表面。如果您使用的是磁力充电底座(Charging Dock)或MagSafe Duo 充电器(MagSafe Duo Charger)，则可能需要手动将手表调整到位，尤其是当您的Apple Watch 的(Apple Watch)表壳较大（44 毫米、45 毫米或 49 毫米）时。了解如何识别您的 Apple Watch 型号和表壳尺寸(how to identify your Apple Watch model and case size)。
打开Apple Watch的表带并将其放在磁力充电底座(Magnetic Charging Dock)或MagSafe Duo 充电器(MagSafe Duo Charger)上。将(Align)Apple Watch背面与充电座的凹面对齐，然后调整其位置或角度，直至开始充电。如果您的手表持续发出叮当声，请取下表带并将其重新放在充电座上。
4. 清洁Apple(Your Apple Watch) Watch背面(Back)
异物可能会阻碍从磁性充电线(Magnetic Charging Cable)到Apple Watch 的(Apple Watch)电力传输。如果您的Apple Watch(Apple Watch)在充电时持续发出叮当声，请检查陶瓷后背是否有灰尘、汗水或污垢。
使用干净、无磨损且不起毛的超细纤维布擦拭(microfiber)Apple Watch的背面。用清水轻轻润湿布，以去除粘在背面水晶上的污垢或粘稠物。然后(Afterward)，用干净且非研磨性的布擦干背面水晶的表面。
您还应该检查磁力充电线(Magnetic Charging Cable)的表面是否有污垢或灰尘。使用干燥、无磨损且不起毛的布清洁磁力线。
注意：请勿使用肥皂、清洁产品或压缩空气清洁（或干燥） Apple Watch 。这些材料可能会对您的Apple Watch造成不可逆转的损坏。我们关于正确清洁 Apple Watch 的(properly cleaning Apple Watches)综合指南提供了有关要使用和避免的清洁产品/材料的更多信息。
5.尝试不同的充电器(Different Charger)或电源适配器(Power Adapter)
通过使用不同的电源适配器和磁力线缆为Apple Watch(Apple Watch)充电，对充电配件进行诊断测试。这将有助于确定持续充电的声音的根本原因。
将手表的磁力充电线(Magnetic Charging Cable)插入不同的电源适配器、移动电源或计算机USB端口。如果您的Apple Watch通过其他电源适配器正常充电且没有反复发出叮当声，则
USB电源适配器可能已损坏。(USB)
丢弃(Discard)有故障的电源适配器并从 Apple 购买正品替换件(authentic replacement from Apple)。您还可以使用具有USB 2.0(USB 2.0)（或更高版本）输出
的第三方电源适配器为Apple Watch充电。
如果您的Apple Watch在连接到 Apple 或第三方电源适配器时不断发出叮当声，那么磁力充电线(Magnetic Charging Cable)绝对是罪魁祸首。
Apple建议使用(Apple)Apple Watch附带的原装磁力充电线(Magnetic Charging Cable)。第三方(Third-party)充电线可能无法像原装Apple 磁力充电线那样有效地为您的(Apple Magnetic Charging Cable)Apple Watch充电。假冒(Counterfeit)或仿冒的线缆可能会损坏您的Apple Watch并导致触电、受伤或火灾。
如果您的原装充电线丢失或损坏，请从Apple 在线商店(Apple’s online store)或附近的 Apple Store 零售店购买正品替换品。
6. 重新启动或强制重新启动您的 Apple Watch(Force Restart Your Apple Watch)
关闭 Apple Watch(Shutting down your Apple Watch)并将其重新打开可以解决系统故障，导致充电时发出叮当声。
将Apple Watch从充电器上取下，按住侧面(Side)按钮，然后点击电源(Power)图标。将“关闭电源(Power Off)”滑块拖至右侧以关闭Apple Watch。
或者，前往Settings > General > Shut Down，然后拖动“关闭电源(Power Off)”滑块。等待 30 秒，让Apple Watch关闭并重新打开。
按住侧面(Side)按钮 3-5 秒即可打开所有Apple Watch型号。将Apple Watch(Apple Watch)正确放置在磁力充电线上(Charging Cable)，然后等待充电。
(Force)如果 Apple Watch 在充电器或充电线上持续发出提示音，
请强制重新启动您的Apple Watch 。
如何强制重启Apple Watch
同时按住手表的侧面(Side)按钮和数字表冠(Digital Crown)至少 10 秒钟。
(Release)当Apple(Apple)徽标出现在Apple Watch屏幕上时，(Apple Watch)松开两个按钮。
7. 更新你的Apple Watch
watchOS 更新有时包括针对充电故障和其他系统问题的错误修复。例如，watchOS 8.4附带修复了导致某些充电器无法正常工作的错误。watchOS 8.1.1还修复了(watchOS 8.1.1)Apple Watch Series 7特有的充电问题。
如果您已经尝试了上述所有方法，但充电时仍然发出叮当声，请更新 Apple Watch 的软件。
转到Settings > General > Software Update。点击“下载(Tap Download)并安装”(Install)，选择“继续”(Proceed)，然后输入手表的密码以开始下载最新更新。
(Pair)通过蓝牙(Bluetooth)将您的 iPhone 和Apple Watch配对，并将两者连接到Wi-Fi。此外，您的手表必须有至少 50% 的电池电量才能安装 watchOS 更新。如果您在安装 watchOS 更新时遇到问题，
请参阅我们有关修复 Apple Watch 更新问题的故障排除指南。(fixing Apple Watch update issues)
停住叮！
如果充电声持续存在，
请联系 Apple 支持或将 Apple Watch 重置为出厂设置。(reset your Apple Watch)
Apple Watch Keeps Dinging on Charger? 7 Fixes to Try
Apple Watches plaу a chime or ding and display a charging symbol when connected to a charger. If your watch beeps or dings non-stop when charging, there’ѕ likely a problem with your charging accessories or power source.
We’ll show you different ways to get your Apple Watch to charge correctly and stop dinging on the charger. The troubleshooting steps in this tutorial apply to all Apple Watch series or models.
1. Reconnect the Charging Cable and Adapter
Your Apple Watch might ding repeatedly while charging if the Magnetic Charging Cable or Dock and power adapter have a loose connection.
Ensure your charging stand, cable, or dock is inserted fully into the power adapter. Also, ensure the power adapter is inserted fully into the wall outlet or power strip.
2. Remove Apple Watch Case
Using protective accessories on your Apple Watch can save you hundreds of dollars in repair costs. However, some protective cases can interfere with touch input and swipe gestures. Thick or “rugged” cases can also prevent your Apple Watch from snapping to the surface of the Magnetic Charging Cable.
If your Apple Watch has a protective case, remove it and check if it charges without dinging repeatedly. If you must use a protective case, buy one that doesn’t cover your watch’s ceramic back.
3. Readjust Your Apple Watch
Apple Watches snap to the surface of the Magnetic Charging Cables. If you’re using a Magnetic Charging Dock or MagSafe Duo Charger, you may need to manually adjust your watch into position, especially if your Apple Watch has a large case—44mm, 45mm, or 49mm. See how to identify your Apple Watch model and case size.
Open your Apple Watch’s band and lay it on the Magnetic Charging Dock or MagSafe Duo Charger. Align the back of your Apple Watch with the concave surface of the charging dock and adjust its position or angle until it starts charging. If your watch keeps dinging, remove the band and place it on the charging dock again.
4. Clean the Back of Your Apple Watch
Foreign particles can block power transfer from the Magnetic Charging Cable to your Apple Watch. Check the ceramic back for dust, sweat, or dirt if your Apple Watch keeps dinging while charging.
Wipe the back of your Apple Watch using a clean, non-abrasive, and lint-free microfiber cloth. Dampen the cloth lightly with fresh water to remove grime or gunk stuck on the back crystal. Afterward, dry the surface of the back crystal with a clean and non-abrasive cloth.
You should also check the surface of the Magnetic Charging Cable for dirt or dust. Clean the magnetic cable with a dry, non-abrasive, and lint-free cloth.
Note: Do not clean (or dry) your Apple Watch with soap, cleaning products, or compressed air. These materials can cause irreversible damage to your Apple Watch. Our comprehensive guide on properly cleaning Apple Watches provides more information on cleaning products/materials to use and avoid.
5. Try a Different Charger or Power Adapter
Run a diagnostic test on your charging accessories by charging your Apple Watch from a different power adapter and magnetic cable. That’ll help determine the root cause of the constant charging dings.
Plug your watch’s Magnetic Charging Cable into a different power adapter, power bank, or computer USB port. The USB power adapter is likely damaged if your Apple Watch charges properly from other power adapters without dinging repeatedly.
Discard the faulty power adapter and buy an authentic replacement from Apple. You can also charge your Apple Watch using third-party power adapters with USB 2.0 (or later) outputs.
If your Apple Watch keeps dinging when connected to Apple’s or third-party power adapters, the Magnetic Charging Cable is most definitely the culprit.
Apple recommends using the original Magnetic Charging Cable included with your Apple Watch. Third-party cables might not charge your Apple Watch as efficiently as the original Apple Magnetic Charging Cable. Counterfeit or knockoff cables can damage your Apple Watch and cause electric shock, injury, or fire.
If your original charging cable is missing or broken, buy an authentic replacement from Apple’s online store or a nearby Apple Store.
6. Reboot or Force Restart Your Apple Watch
Shutting down your Apple Watch and turning it back can resolve system glitches, causing it to ding when charging.
Take your Apple Watch off the charger, press and hold the Side button, and tap the Power icon. Drag the Power Off slider to the right to shut down your Apple Watch.
Alternatively, head to Settings > General > Shut Down and drag the Power Off slider. Wait 30 seconds for your Apple Watch to shut down and turn it back on.
Pressing and holding the Side button for 3-5 seconds will power on all Apple Watch models. Place and properly position your Apple Watch on its Magnetic Charging Cable and wait for it to charge.
Force restart your Apple Watch if it keeps chiming on the charger or charging cable.
How to Force Restart Apple Watch
Press and hold your watch’s Side button and Digital Crown simultaneously for at least 10 seconds.
Release both buttons when the Apple logo appears on your Apple Watch screen.
7. Update Your Apple Watch
watchOS updates sometimes include bug fixes for charging malfunctions and other system issues. For instance, watchOS 8.4 shipped with fixes for a bug that prevents some chargers from working correctly. The watchOS 8.1.1 also fixed charging issues specific to the Apple Watch Series 7.
Update your Apple Watch’s software if you’ve tried everything above, but it keeps dinging when charging.
Go to Settings > General > Software Update. Tap Download and Install, select Proceed, and enter your watch’s passcode to start downloading the latest update.
Pair your iPhone and Apple Watch via Bluetooth and connect both to Wi-Fi. Also, your watch must have at least 50 percent battery charge to install watchOS updates. Refer to our troubleshooting guide on fixing Apple Watch update issues if you have trouble installing watchOS updates.
Stop the Ding!
Contact Apple Support or reset your Apple Watch to factory settings if the charging dings persist.
