Apple Watch(Apple Watch)因其时尚的设计、集成的 iOS 功能和用户友好的界面而成为科技行业中最具影响力的智能手表之一。但即使是最精致的小工具也偶尔会出现问题。
没有什么比Apple Watch麦克风停止工作更令人沮丧的了,尤其是当您正在听写短信或发送重要的语音备忘录时。Siri和听写是Apple Watch的一些关键功能,麦克风问题可能会严重影响您的用户体验。

值得庆幸的是,大多数与麦克风相关的问题都是暂时的,可以通过一些快速故障排除步骤来解决。本文将指导您完成一套全面的修复方法,如果您的Apple Watch麦克风无法工作,您可以尝试这些修复方法。这些步骤适用于所有Apple Watch系列,包括搭载 watchOS 9 和 iOS 16 的新款Apple Watch Ultra。
1. 检查软件更新
麦克风问题可归因于软件问题。Apple定期发布 watchOS 和 iOS 的更新,修复已知错误并提高整体性能。
要检查 iPhone 上的更新,请前往Settings > General > Software Update。如果有可用的软件更新,请下载并安装它。

对于Apple Watch ,请在 iPhone 上打开Watch应用,轻点(Watch)“我的手表”(My Watch),然后前往General > Software Update。

如果有可用更新,请确保您的设备已连接到Wi-Fi,点击“下载(Download)并安装”(Install),然后在出现提示时输入密码。
2. 取消配对并重新配对 Apple Watch(Re-pair Your Apple Watch)
iPhone 和Apple Watch之间的配对过程会建立强大的蓝牙(Bluetooth)和Wi-Fi连接。如果这种结合被破坏,可能会影响某些功能,包括麦克风。取消配对并重新配对Apple Watch通常可以解决这些问题。
要取消配对Apple Watch,请转到iPhone 上的Watch应用,选择(Watch)“我的手表”(My Watch)选项卡,选择“所有手表”(Watches),点击手表旁边的“i”图标,然后选择“取消配对 Apple Watch”(Unpair Apple Watch)。

注意:取消配对会自动将Apple Watch(Apple Watch)数据备份到 iPhone,这在您重新配对时会很有帮助。
按照屏幕上的说明重新配对,并将Apple Watch靠近 iPhone。请务必从取消配对过程中创建的备份进行恢复,以保持设置和数据完好无损。
3. 重新启动Apple Watch和 iPhone
与Mac(Mac)或 iPad一样,重新启动Apple Watch和 iPhone 可以解决可能导致麦克风问题的小软件故障。要重新启动Apple Watch,请按住侧面按钮,直到出现关机屏幕。

选择屏幕右上角的电源图标以显示关闭电源滑块。
然后拖动它来关闭设备。按住侧面按钮直至出现Apple徽标,将其重新打开。如果您仍然无法管理,请查看我们有关如何强制重新启动或重新启动 Apple Watch 的(how to force restart or reboot an Apple Watch)指南。
对于您的 iPhone,该过程因型号而异。一般来说,您可以按住侧面按钮和音量按钮直到出现滑块来关闭 iPhone。按照我们的指南重新启动任何型号的 iPhone(restart any model of iPhone)。
4. 使用语音备忘录(Voice Memos)或Siri测试麦克风
执行上述步骤后,检查您的Apple Watch麦克风是否正常工作至关重要。打开语音备忘录(Voice Memos)应用程序或按住数码表冠激活(Digital Crown)Siri。

说几句话检查麦克风是否拾音。
5. 检查麦克风孔(Microphone Hole)是否有杂物(Debris)
如果您的语音备忘录测试中没有记录任何内容,则需要进行更多的实际修复。与大多数智能手表一样,Apple Watch设计为佩戴在手腕上,并暴露在自然环境中,因此很容易受到灰尘和碎片的影响。尤其是麦克风孔,随着时间的推移可能会被堵塞。这种堵塞会影响麦克风的功能,导致音频清晰度降低或麦克风完全无法工作等问题。麦克风孔的确切位置因Apple Watch系列而异。
要清洁麦克风孔,请使用柔软、干燥、不起毛的布。这可以是超细纤维布或经常用于清洁眼镜的布。轻轻擦拭孔,清除任何可见的灰尘或碎屑。
如果布不起作用,您可以使用小软毛刷,例如干净的牙刷或专为清洁相机镜头或电子设备而设计的刷子。轻轻地刷过麦克风孔,清除任何残留的颗粒。
注意:切勿将任何物品插入麦克风孔中。大头针或回形针等工具似乎有助于清除碎片,但它们可能会损坏敏感的麦克风组件。
6.使用AirPods或噪音应用程序(Noise App)检查音频干扰(Audio Interference)

您的 AirPods 或蓝牙(Bluetooth)配件可能会干扰Apple Watch的音频。尝试断开这些设备与 iPhone 和Apple Watch 的(Apple Watch)连接。此外,如果您使用“噪音”(Noise)应用程序,手表可能会显示“测量(Measurement)暂停”,因为它优先考虑该应用程序的麦克风使用。在这种情况下,关闭噪音(Noise)应用程序可以解决问题。
7.关闭“嘿Siri”
虽然很有用,但“嘿 Siri(Hey Siri) ”有时会干扰您的麦克风。前往iPhone 上的Settings > Siri和搜索”(Search),然后关闭“聆听(Listen)Hey Siri”。

再次测试Apple Watch(Apple Watch)上的麦克风。如果有效,您应该限制使用“Hey Siri”或仅在必要时才打开它。
8. 将 Apple Watch 恢复出厂设置
如果上述解决方案均无效,请考虑将Apple Watch重置为出厂设置。在继续之前,请确保您的数据已备份到您的 iPhone。
在Apple Watch上前往Settings > General > Reset。

点击删除所有内容(Tap Erase All Content)和设置(Settings)并输入您的密码。您的Apple Watch将重新启动,并显示Apple徽标和进度轮。重置后,您可以重新启动Apple Watch,从 iPhone 上的备份进行恢复。
9.联系Apple支持(Apple Support)或访问(Visit)Apple Store(Apple)

如果您已尝试上述所有修复方法,但Apple Watch麦克风仍然无法工作,则可能存在硬件问题。如果您的设备在保修期内,请联系Apple 支持(Apple Support)或前往Apple Store零售店。他们可以运行诊断测试并提供维修或更换选项。
请记住(Remember),虽然这些故障排除步骤已被证明对许多遇到麦克风问题的用户有效,但其成功程度可能会因问题的具体性质而异。请记住(Remember)访问 Apple 的论坛或技术社区以获取更多见解。
Apple Watch Microphone Not Working? 9 Fixes to Try
Τhе Apple Watch has become one of the moѕt influential smartwatches in the tech industry, tоuted for its sleek design, integrated iOS features, and user-friendly interfаce. But even the most refined gadget may have issues occasionally.
There’s nothing more frustrating than when your Apple Watch microphone stops working, especially when you’re in the middle of dictating a text message or sending an important voice memo. With Siri & dictation being some of the key features of the Apple Watch, microphone issues can significantly hinder your user experience.

Thankfully, most microphone-related issues are temporary and can be resolved with some quick troubleshooting steps. This article will guide you through a comprehensive set of fixes you can try if your Apple Watch microphone is not working. These steps apply to all Apple Watch series, including the new Apple Watch Ultra with watchOS 9 and iOS 16.
1. Check for Software Updates
Microphone issues can be attributed to a software issue. Apple regularly releases updates for watchOS and iOS, fixing known bugs and improving overall performance.
To check for an update on your iPhone, head to Settings > General > Software Update. If a software update is available, download and install it.

For your Apple Watch, open the Watch app on your iPhone, tap My Watch, and then go to General > Software Update.

If an update is available, ensure your device is connected to Wi-Fi, tap Download and Install, and enter your passcode if prompted.
2. Unpair and Re-pair Your Apple Watch
The pairing process between your iPhone and Apple Watch establishes a robust Bluetooth and Wi-Fi connection. If this bond is disrupted, it might affect some features, including the microphone. Unpairing and re-pairing your Apple Watch can often resolve these issues.
To unpair Apple Watch, go to the Watch app on your iPhone, select the My Watch tab, select All Watches, tap the ‘i’ icon beside your watch, and choose Unpair Apple Watch.

Note: Unpairing will automatically back up your Apple Watch data to your iPhone, which will be helpful when you re-pair.
Follow the on-screen instructions to re-pair and by bringing your Apple Watch close to your iPhone. Be sure to restore from the backup you created during the unpairing process to keep your settings and data intact.
3. Restart Your Apple Watch and iPhone
Like your Mac or iPad, restarting your Apple Watch and iPhone can resolve minor software glitches that might be causing the microphone issues. To restart your Apple Watch, press and hold the side button until the power-off screen appears.

Select the power icon at the top right of the screen to reveal the power off slider.
Then drag it to turn off the device. Turn it back on by holding the side button until the Apple logo appears. If you’re still not managing, check out our guide on how to force restart or reboot an Apple Watch.
For your iPhone, the process varies depending on the model. Generally, you can turn off your iPhone by holding the side and volume buttons until the slider appears. Follow our guide to restart any model of iPhone.
4. Test the Microphone With Voice Memos or Siri
After performing the steps above, checking if your Apple Watch microphone is working is essential. Open the Voice Memos app or activate Siri by pressing and holding the Digital Crown.

Speak a few words to check if the microphone is picking up sound.
5. Check the Microphone Hole for Debris
If nothing is being recorded in your voice memo test, it’s time for a more hands-on fix. Like most smartwatches, the Apple Watch is designed to be worn on the wrist, and exposed to the elements, making it susceptible to the ingress of dust and debris. The microphone hole, in particular, can get clogged over time. This blockage can affect the microphone’s functionality, leading to issues like reduced audio clarity or the microphone not working altogether. The exact location of the microphone hole varies depending on your Apple Watch series.
To clean the microphone hole, use a soft, dry, lint-free cloth. This could be a microfiber cloth or the cloth that is often used to clean eyeglasses. Gently wipe over the hole to remove any visible dust or debris.
If the cloth doesn’t do the trick, you can use a small, soft-bristled brush, such as a clean toothbrush or a brush designed for cleaning camera lenses or electronic devices. Very gently brush over the microphone hole to dislodge any trapped particles.
Note: Never insert anything into the microphone hole. Tools like pins or paper clips might seem helpful for dislodging debris, but they could damage the sensitive microphone component.
6. Check for Audio Interference With AirPods or Noise App

Your AirPods or Bluetooth accessories can interfere with the Apple Watch’s audio. Try disconnecting these devices from your iPhone and Apple Watch. Additionally, if you use the Noise app, the watch might show “Measurement Suspended” because it prioritizes microphone usage for that app. In such instances, closing the Noise app can resolve the issue.
7. Turn Off ‘Hey Siri’
While useful, ‘Hey Siri’ can occasionally interfere with your microphone. Go to Settings > Siri & Search on your iPhone and turn off Listen for Hey Siri.

Test the microphone on your Apple Watch again. If it works, you should limit your use of ‘Hey Siri’ or turn it on only when necessary.
8. Factory Reset Your Apple Watch
If none of the above solutions work, consider resetting your Apple Watch to its factory settings. Before proceeding, ensure that your data is backed up to your iPhone.
Go to Settings > General > Reset on your Apple Watch.

Tap Erase All Content and Settings and enter your passcode. Your Apple Watch will restart, and display the Apple logo and a progress wheel. Once reset, you can restart your Apple Watch, restoring from the backup on your iPhone.
9. Contact Apple Support or Visit an Apple Store

If you’ve tried all the above fixes and your Apple Watch microphone still isn’t working, there may be a hardware issue. If your device is under warranty, contact Apple Support or visit an Apple Store. They can run diagnostic tests and offer repair or replacement options.
Remember, while these troubleshooting steps have proven effective for many users experiencing microphone issues, their success might vary depending on the exact nature of the problem. Remember to look into Apple’s forums or tech communities for more insights.