您是否无法打开Apple Watch ？我们将解释为什么会发生这种情况以及您可以采取哪些措施来解决该问题。
拒绝开机的Apple Watch并不一定表示存在硬件问题，因为通常有多种软件因素在起作用。例如，它可能没电了，操作系统可能崩溃了，或者可访问性设置可能阻止它显示手表的表面。
如果您无法打开Apple Watch，请按照本故障排除指南中的解决方案进行操作，您应该能够让它重新启动。
1. 强制重启你的 Apple Watch
Apple Watch上的系统软件崩溃或出现故障并导致显示屏不亮的情况并不少见。解决此问题的唯一方法是硬重置 watchOS 设备。
硬重置（或强制重启）会短暂切断内部硬件组件的电源并触发软件重启。除非问题发生在 watchOS 更新期间(problem occurred amid a watchOS update)，否则您不必担心对 Apple 的智能手表进行硬重置。
要强制重启Apple Watch，请同时按住数码表冠(Digital Crown)和侧边(Side)按钮至少 10 秒钟，然后在看到Apple标志时松开。然后，等待 watchOS 完成启动并输入设备密码以访问表盘。
2. 为 Apple Watch 电池充电
如果硬重置没有任何作用，并且您的Apple Watch显示屏仍处于关闭状态，则您的电池可能没电了。尝试将 watchOS 设备放在其磁性充电器上并等待至少五分钟（如果您看到“带充电器的闪电”指示器，则等待 30 分钟）。
您的Apple Watch会在充满电后自动转动。如果没有任何反应，请按住侧面按钮手动启动它。(Side)如果您继续看到黑屏，请在不移除充电器的情况下再次执行硬重启。
3.检查磁力充电线(Magnetic Charging Cable)
接下来，仔细检查 Apple Watch 的充电器是否磨损。如果看起来没问题，请尝试将它连接到不同的 iPhone 或 iPad 电源适配器、墙上插座或Mac或 PC
上的USB端口。
但是，如果数据线磨损或充电座看起来明显损坏，则必须考虑购买新充电器。如果您想购买 Apple 标准产品以外的产品，这里有几款您可能感兴趣
的顶级第三方 Apple Watch 充电器。(top third-party Apple Watch chargers)
4.禁用屏幕窗帘功能(Screen Curtain Feature)
您的Apple Watch附带一项名为Screen Curtain的辅助功能，可让您在显示屏关闭的情况下使用语音命令来操作它。如果您在 watchOS中的“设置”(Settings)应用程序周围挖掘并意外激活了Screen Curtain ，您可以通过 iPhone 上的(Screen Curtain)Apple Watch应用程序退出由此产生的黑屏。
- 在您的 iOS 设备上打开Watch应用程序，然后点按(Watch)我的手表(My Watch)。
- 转到“Accessibility > VoiceOver > Screen Curtain。
- 向下滚动(Scroll)并关闭Screen Curtain旁边的开关。
5.关闭动力储存模式
Power Reserve是一项 watchOS 电源管理功能，可关闭Apple Watch显示屏以延长电池寿命。它可以让你通过按下侧面(Side)按钮来检查时间，但别无其他。
如果您有意或无意地启用了Power Reserve，只需按住侧边(Side)按钮直到您看到Apple标志。但是，如果您看到红色的“闪电”符号（表示剩余电池寿命极少），则除非先充电，否则您无法正常使用 watchOS 设备。
6.将Apple Watch重置为出厂默认设置(Factory Defaults)
如果上述修复方法均无济于事，请尝试使用 iPhone 的Apple Watch应用程序将(Apple Watch)Apple Watch重置为出厂默认设置。该过程将您的 watchOS 数据无线备份到您的 iPhone(backs up your watchOS data wirelessly to your iPhone)，因此您不会丢失任何东西。如果你想继续：
- 将Apple Watch放在磁性充电器上。
- 打开 iPhone 上的Watch应用程序并切换到“我的手表”(My Watch)。
- 点击屏幕左上角
的所有手表选项。(All Watches)
- 轻点Apple Watch(Apple Watch)旁边的“更多信息”图标。
- 轻点“取消配对 Apple Watch”。
如果Watch应用成功重置了您的Apple Watch，屏幕会在片刻后自动亮起。当您开始设置 watchOS 设备(set up your watchOS device)时，您可以选择恢复数据备份。
如果此后一切正常，请安装任何待处理的 watchOS 更新，以最大程度地减少遇到类似软件问题的可能性。为此，请重新打开 iPhone 的Watch应用程序，然后转到“My Watch > General > Software Update。
Apple Watch无法开机？是时候(Time)去苹果(Apple)商店
了
如果您仍然无法打开Apple Watch，是时候联系 Apple 支持(contact Apple Support)并为自己预约Genius Bar 天才吧(Genius Bar)了。您可能正在处理只有Apple技术人员才能诊断和修复的硬件问题。但是，如果您的Apple Watch仍在保修期内，您可能有资格获得免费更换。
Apple Watch Won’t Turn On? 6 Ways to Fix
Do you have trouble gettіng your Apple Watch to turn on? We’ll explain why thаt happens and what you can do to fix the problem.
An Apple Watch that refuses to turn on doesn’t necessarily indicate a hardware issue since multiple software factors are often at play. For example, it could have run out of charge, the operating system may have crashed, or an accessibility setting might prevent it from showing the watch’s face.
If you can’t turn on your Apple Watch, work through the solutions in this troubleshooting guide, and you should be able to get it to boot up again.
1. Force Restart Your Apple Watch
It’s not uncommon for the system software on the Apple Watch to crash or glitch out and stop the display from lighting up. The only way to fix that is to hard reset the watchOS device.
A hard reset—or force restart—cuts the power briefly to the internal hardware components and triggers a software reboot. Unless the problem occurred amid a watchOS update, you shouldn’t worry about subjecting Apple’s smartwatch to a hard reset.
To force restart your Apple Watch, hold the Digital Crown and the Side button simultaneously for at least 10 seconds, and release them when you see the Apple logo. Then, wait until watchOS finishes booting and enter the device passcode to access the watch face.
2. Charge Your Apple Watch Battery
If a hard reset doesn’t do anything and your Apple Watch display remains off, you’re likely dealing with a dead battery. Try placing the watchOS device on its magnetic charger and wait for at least five minutes (or 30 minutes if you see a “lightning bolt with a charger” indicator).
Your Apple Watch will automatically turn itself once it has charged sufficiently. Hold the Side button to boot it up manually if nothing happens. If you continue to see a black screen, perform another hard reboot without removing the charger.
3. Check the Magnetic Charging Cable
Next, inspect your Apple Watch’s charger closely for wear and tear. If it looks OK, try connecting it to a different iPhone or iPad power adapter, wall outlet, or USB port on your Mac or PC.
However, if the cable is frayed or the charging puck looks visibly damaged, you must consider buying a new charger. If you want to go for something other than Apple’s standard offering, here are several top third-party Apple Watch chargers that could interest you.
4. Disable the Screen Curtain Feature
Your Apple Watch comes with an accessibility feature called Screen Curtain that allows you to operate it using voice commands with the display off. If you were digging around the Settings app in watchOS and accidentally activated Screen Curtain, you can get out of the resulting black screen via the Apple Watch app on your iPhone.
- Open the Watch app on your iOS device and tap My Watch.
- Go to Accessibility > VoiceOver > Screen Curtain.
- Scroll down and turn off the switch next to the Screen Curtain.
5. Turn Off Power Reserve Mode
Power Reserve is a watchOS power management feature that turns off the Apple Watch display to preserve battery life. It lets you check the time by pressing the Side button but nothing else.
If you intentionally or accidentally enabled Power Reserve, just press and hold the Side button until you see the Apple logo. However, if you see a red “lightning bolt” symbol (which indicates an extremely little battery life remaining), you can’t use your watchOS device normally unless you charge it first.
6. Reset Apple Watch to Factory Defaults
If none of the fixes above help, try resetting the Apple Watch to factory defaults using the iPhone’s Apple Watch app. The procedure backs up your watchOS data wirelessly to your iPhone so you won’t lose anything. If you want to go ahead:
- Place your Apple Watch on its magnetic charger.
- Open the Watch app on your iPhone and switch to the My Watch.
- Tap the All Watches option at the top-left corner of the screen.
- Tap the More Info icon next to your Apple Watch.
- Tap Unpair Apple Watch.
If the Watch app manages to reset your Apple Watch, the screen should automatically light up after a few moments. You can choose to restore a backup of your data when you begin to set up your watchOS device.
If everything works fine after that, install any pending watchOS updates to minimize the chances of running into similar software issues. To do that, re-open the iPhone’s Watch app and go to My Watch > General > Software Update.
Apple Watch Not Turning On? It’s Time to Visit an Apple Store
If you still can’t turn on your Apple Watch, it’s time to contact Apple Support and book yourself a Genius Bar reservation. You’re likely dealing with a hardware problem that only an Apple technician can diagnose and fix. However, if your Apple Watch is still within its warranty period, you might be eligible for a free replacement.
