微软^(Microsoft)一直在努力在Windows 10中添加大量内置的故障排除方法。对于Windows 10^{(Windows 10)}中的每个标准错误，几乎都有一个。继续前进，该团队添加了推荐的故障排除^{(Recommended Troubleshooting)}。它允许 Windows 10 自动修复您设备上的许多关键问题。在这篇文章中，我们将学习如何在Windows 10中打开或关闭推荐的故障排除^{(Recommended troubleshooting)}，如果您觉得有必要的话。

在Windows 10^{(Windows 10)}中打开或关闭推荐的故障排除

Microsoft 诊断^{(Microsoft Diagnostic)}和反馈^(Feedback)数据提供两种设置。基本^(Basic)和完整^(Full)。如果您想关闭推荐的故障排除，那么唯一的出路就是阻止它从您的计算机收集完整的数据。因此，要打开或关闭它，您可以选择在它们之间切换。

• 导航^(Navigate)到Settings > Privacy > Diagnostics和反馈。
• 在诊断数据下选择基本
• 返回Settings > Update和Security > Troubleshoot。

您现在应该会看到一条警告消息，上面写着 —共享完整诊断数据以获取更多故障排除建议^{(Share Full Diagnostics data to get additional troubleshooting recommendations)}。

该消息明确指出，Microsoft将仅根据其收集的完整诊断^{(Full Diagnostic)}数据提供推荐的故障排除。任何高级故障排除都不会进入您的计算机。

使用注册表启用或禁用推荐的故障排除

如果您对注册表^(Registry)感到满意，或者想要为远程计算机打开或关闭它，那么您需要进行以下更改。

通过在运行提示中键入regedit打开注册表编辑器，然后按 Enter。

导航：

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\

检查您是否有WindowsMitigation密钥，如果有 - 很好！如果没有，请右键单击左窗格，然后创建一个名为WindowsMitigation 的新密钥。^{(WindowsMitigation.)}

现在在此之下，创建一个DWORD UserPreference。

双击^(Double)UserPreference 以编辑该值。将值设置^{(Set Value)}为 1（开）或 3（关^(Off)）并退出。

重新启动计算机以查看更改。

推荐的故障排除在Windows 10中的工作原理^{(Windows 10)}

该功能可以查看发送回Microsoft团队的错误日志，使用算法为您设置解决方案。它们只不过是 Windows 收集并发送回Microsoft团队的诊断和反馈数据。其设置可在Settings > Privacy > Diagnostics和反馈”下找到。

这些建议仅在您连接到 Internet 时可见。否则，它将留下相同的警告。

这是微软的一个伟大举措，但我们必须看看它对大多数消费者的影响。
^{(It’s a great move from Microsoft, but we will have to see how it works for most of the consumers.)}

How to turn on or off Recommended troubleshooting in Windows 10

Microsoft has worked hard tо add tons of inbuilt troubleshooting methods in Windows 10. Τhere іs one for almost one for еvery standard error in Windows 10. Going ahead, the team has added Recommended Troubleshooting. It allows Windows 10 to fix many critical problems on your device automatically. In this post, we will learn how to turn on or off Recommended troubleshooting in Windows 10, should you feel the need to do so.

Turn on or off Recommended troubleshooting in Windows 10

Microsoft Diagnostic & Feedback data offers two settings. Basic and Full. If you want to turn off recommended troubleshooting, then the only way out is to stop it from collecting complete data from your computer. So, to turn it on or off, you can choose to switch between them.

• Navigate to Settings > Privacy > Diagnostics & feedback.
• Choose Basic under Diagnostics Data
• Go back to Settings > Update & Security > Troubleshoot.

You should now see a warning message which would say — Share Full Diagnostics data to get additional troubleshooting recommendations.

The message clearly states that Microsoft will only offer recommended troubleshooting based on the Full Diagnostic data which it collects. None of the advanced troubleshooting will make it to your computer.

Enable or Disable Recommended troubleshooting using Registry

If you are comfortable with the Registry or want to turn it on or off for remote computers, here are the changes you need to make.

Open the Registry Editor by typing regedit in the Run prompt and hit Enter.

Navigate to:

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\

Check if you have WindowsMitigation key, if yes – good! If not, right-click the left pane, and create a new key with the name WindowsMitigation.

Now under that, create a DWORD UserPreference.

Double click on UserPreference to edit the value. Set Value to 1 (On) or 3(Off) and exit.

Restart your computer to see the changes.

How Recommended troubleshooting works in Windows 10

The functionality can look into the error logs sent back to the Microsoft team, use an algorithm to set up a solution for you. They are nothing but Diagnostics and Feedback data which Windows collects and sends back to the Microsoft team. The settings of which are available under Settings > Privacy > Diagnostics & feedback.

The recommendations are only visible when you are connected to the internet. Otherwise, it will leave a warning about the same.

It’s a great move from Microsoft, but we will have to see how it works for most of the consumers.

Related posts

• 在Windows 10 Hello Face Authentication中启用Enhanced Anti-Spoofing

• 如何格式化Windows 10计算机

• Windows 10 v 21H1中删除的功能

• 如何启用或Windows 10 Disable Automatic Learning

• 在Windows 10中启用，Disable Data Collection Reliability Monitor

• Windows 10中Taskbar Context Menu中的Hide Toolbars option

• Windows 10 V20H2 October 2020 Update中删除了功能

• 如何在Windows 10上禁用Feature Updates的保障措施

• 在Windows 10启用或禁用任务栏上的新闻和兴趣

• Family Features屏幕时间Activity report不适用于Windows 10

• 适用于残疾人士的 Windows 10 辅助功能

• 在Windows 10禁用Telemetry & Data Collection使用Task Scheduler

• Windows 10 Download Media Feature Pack N version

• 在Windows 10打开或Off Caret Browsing Support

• 如何在Windows 10中使用Resource Monitor

• 如何禁用可移动存储类和Windows 10访问

• 如何在Windows 10上禁用或，启用和配置Focus Assist

• 如何在Windows 10中禁用步骤Recorder

• Picsart在Windows 10上提供Custom Stickers & Exclusive 3D Editing

• 无法在Windows 10上安装Windows Media Feature Pack