在这篇文章中，我们将向您展示如何使用本地组策略编辑器^{(Local Group Policy Editor)}或注册表编辑器^{(Registry Editor)}在Windows 11/10更改电源按钮操作^{(change the Power button action)}。我们已经了解了如何更改电源按钮，使用控制面板，^{(how to change what the Power button does, using the Control Panel,)}现在让我们看看如何通过GPEDIT或REGEDIT进行操作。

如何更改Windows 11/0 上的电源按钮操作^(Power)

要使用组策略编辑器^{(Group Policy Editor)}更改Windows 11/10电源^(Power)按钮操作，请按照以下步骤操作 -

1. 按Win+R。
2. 输入gpedit.msc并点击Enter按钮。
3. 转到计算机配置^{(Computer Configuration)}中的按钮设置^{(Button Settings)}。
4. 双击选择电源按钮操作^{(Select the Power button action)}。
5. 选择启用^(Enabled)选项。
6. 从电源按钮操作^{(Power Button Action)}下拉列表中选择一个操作。
7. 单击应用^(Apply)和确定^(OK)。

打开本地组策略编辑器^{(Local Group Policy Editor)}。为此，请按Win+R，键入gpedit.msc， 然后按Enter 按钮。之后，导航到以下路径-

Computer Configuration > Administrative Templates > System > Power Management > Button Settings

您将获得两个设置：

• 选择电源^(Power)按钮操作（插入）
• 选择电源^(Power)按钮操作（使用电池）。

单击它们中的每一个，选择 “已启用” ^(Enabled )选项，然后在展开 “电源按钮操作”^{(Power Button Action)}下拉列表后选择一个操作。

最后，分别单击 Apply 和 OK 按钮。

以下方法是关于注册表^(Registry)调整的。因此，建议先 备份所有注册表文件并^{(backup all Registry files)}创建系统还原点 。

^{(Change Power)}使用注册表编辑器^{(Registry Editor)}更改电源按钮操作

要更改Windows 10上的^{(Windows 10)}电源^(Power)按钮操作，请按照以下步骤操作。

打开注册表编辑器^{(Registry Editor)}。为此，请按Win+R，键入regedit并按 Enter 按钮。现在，您将看到UAC提示，您必须单击 “是” ^(Yes )按钮。然后，导航到以下路径-

HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Power\PowerSettings\7648EFA3-DD9C-4E3E-B566-50F929386280

右键单击7648EFA3-DD9C-4E3E-B566-50F929386280> New > DWORD (32-bit) Value并将其命名为 ACSettingIndex或^{(DCSettingIndex)}DCSettingIndex  。

ACSettingIndex 表示 选择电源按钮操作（插入）^{(the Select the Power button action (plugged in))}设置，而DCSettingIndex定义 选择电源按钮操作（使用电池）^{(Select the Power button action (on battery))}设置。供您参考，您也可以同时添加两者。

命名REG_DWORD值后，双击它以设置 值数据^{(Value data)}。您可以输入其中任何一个 -  1、  2和 3。

• 1：睡觉
• 2：休眠
• 3：关机

最后，单击 “确定” ^(OK )按钮进行保存。

其他按钮，例如睡眠^(Sleep)按钮操作或盖子开关操作——所有这些都可以从本地组策略编辑器^{(Local Group Policy Editor)}和注册表编辑器^{(Registry Editor)}中更改。所有这些设置都在您获得电源^(Power)按钮操作设置的最后一个位置可见，即：

• 选择睡眠^(Sleep)按钮操作（插入）
• 选择睡眠^(Sleep)按钮操作（使用电池）
• 选择盖子开关动作（插入）
• 选择盖子开关动作（使用电池）

您必须在注册表编辑器中创建相同的^{(Registry Editor –)}ACSettingIndex或DCSettingIndex  DWORD（32 位）值 -但在键中为盖子开关操作和睡眠按钮操作创建它。5CA83367-6E45-459F-A27B-476B1D01C93696996BC0-AD50-47EC-923B-6F41874DD9EB

我希望本教程有所帮助。

How to change Power button action when on battery or plugged in

In this post, we will show you how to change the Power button action when it is on battery or plugged in, in Windows 11/10, using Local Group Policy Editor or the Registry Editor. We have seen how to change what the Power button does, using the Control Panel, now let us see how to do it via GPEDIT or REGEDIT.

How to change Power button action on Windows 11/0

To change the Power button action on Windows 11/10 using Group Policy Editor, follow these steps-

1. Press Win+R.
2. Type gpedit.msc and hit the Enter button.
3. Go to Button Settings in Computer Configuration.
4. Double-click on the Select the Power button action.
5. Select Enabled option.
6. Choose an action from the Power Button Action drop-down list.
7. Click Apply and OK.

Open the Local Group Policy Editor. For that, press Win+R, type gpedit.msc, and hit the Enter button. After that, navigate to the following path-

Computer Configuration > Administrative Templates > System > Power Management > Button Settings

You will get two settings:

• Select the Power button action (plugged in)
• Select the Power button action (on battery).

Click on each of them, select the Enabled option, and select an action after expanding the Power Button Action drop-down list.

At last, click the Apply and OK buttons, respectively.

The following method is about Registry tweak. Therefore, it is recommended to backup all Registry files and create a System Restore point first.

Change Power button action using Registry Editor

To change the Power button action on Windows 10, follow the following steps.

Open the Registry Editor. For that, press Win+R, type regedit and hit the Enter button. Now, you will see the UAC prompt where you will have to click the Yes button. Then, navigate to the following path-

HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Power\PowerSettings\7648EFA3-DD9C-4E3E-B566-50F929386280

Right-click on 7648EFA3-DD9C-4E3E-B566-50F929386280 > New > DWORD (32-bit) Value and name it as ACSettingIndex or DCSettingIndex.

ACSettingIndex presents the Select the Power button action (plugged in) setting, whereas DCSettingIndex defines the Select the Power button action (on battery) setting. For your information, you can add both as well.

After naming the REG_DWORD value, double-click on it to set the Value data. You can enter any one of these- 1, 2, and 3.

• 1: Sleep
• 2: Hibernate
• 3: Shut down

At last, click the OK button to save it.

Other buttons such as the Sleep button action or lid switch action – all of these can be changed from the Local Group Policy Editor and Registry Editor. All those settings are visible in the last place where you have got the Power button action setting, viz:

• Select the Sleep button action (plugged in)
• Select the Sleep button action (on battery)
• Select the lid switch action (plugged in)
• Select the lid switch action (on battery)

You will have to create the same ACSettingIndex or DCSettingIndex DWORD (32-bit) Values in the Registry Editor – but create it in the 5CA83367-6E45-459F-A27B-476B1D01C936 key for the lid switch action, and 96996BC0-AD50-47EC-923B-6F41874DD9EB for the Sleep button action.

I hope this tutorial helps.

Related posts

• 启用Network Connections而在Modern Standby上Windows 10

• AC power adapter type不能在Dell中确定

• Windows 10 Brightness Control无法自动工作或更改

• Burn process失败 - Power Calibration Error or Medium Speed Error

• 如何检查，降低或Increase CPU usage在Windows 10

• Microsoft Power Automate Tutorial - 如何开始

• 使用PowerCFG禁用Screen wakeup的Password禁用Ask

• 如何使用Microsoft Power Automate Desktop创建UI workflow

• 如何在Windows 10检查USB Port的Power Output

• 如何在Windows 10上启用或Disable Allow wake定时器

• Control Panel在Windows 10中缺少Hibernate option

• 如何在Battery Power禁用Background Sync到服务器

• 如何改变Windows 11/10 Lock Screen Timeout Period

• Set当您使用PowerCFG关闭laptop lid会发生什么

• 我应该Sleep，Hibernate or Shutdown Windows PC晚上吗？

• 什么是现代Standby？找出您的Windows PC是否支持它

• Windows 11/10中Start Menu中缺少的电源选项

• Windows 10不Sleep | Sleep Mode不Windows 10工作

• Change Wireless Adapter省电模式使用PowerCFG

• Change Sleep Timeout在Windows 10中使用PowerCFG command线