在Windows 11/10/8/7 桌面上使用(Windows)Skype等IP 语音服务时,您有时可能会观察到语音接收器的质量。在这种情况下,您可能需要提高音量才能恢复音频质量。因此,如果您有时认为您的麦克风音量太低,本提示将告诉您如何在Windows中增加或提高麦克风音量。如果麦克风增强(Microphone Boost)选项不可用,这篇文章也会对您有所帮助。
(Increase Microphone)Windows 11/10增加麦克风音量
要增加Windows 11/10中的麦克风音量,请执行以下步骤:
- 右键单击(Right-click)任务栏(Taskbar)上的音量/声音图标。
- 选择声音 (Sounds )选项。
- 切换到录制 (Recording )选项卡。
- 右键单击(Right-click)麦克风并选择Properties。
- 转到级别 (Levels )选项卡。
- 将麦克风增强设置为 +40 dB。
- 单击确定 (OK )按钮。
让我们详细检查这些步骤。
在任务栏(Taskbar)右侧,右键单击“声音”图标,然后从显示的选项中选择“声音”。但是,如果您是 Windows 11,则需要按照本指南打开旧的声音设置面板(open old Sound settings panel)。
右键单击(Right-click)活动麦克风。活动麦克风上有一个绿色复选标记。根据设置,可能存在多个麦克风。
再次,右键单击活动麦克风并选择“属性”选项。
然后,在麦克风属性(Microphone Properties)窗口下,从“常规”选项卡切换到“级别”选项卡并调整增强级别。
默认情况下,电平设置为 0.0 dB。您可以使用提供的滑块将其调整到 +40 dB。
一定要在你的谈话过程中执行这个过程,以便你立即从另一端得到反馈。这还将告诉您所做的调整是否适当。
麦克风音量太低
在极少数情况下,提高麦克风音量可能无法解决您的问题。如果是这样,请从“麦克风属性”窗口中选择“高级”选项卡,而不是“级别”,然后取消选中“允许应用程序执行该设备(Allow application to take executive control of this device)的执行控制”选项。
麦克风增强(Boost)选项不可用
音频(Audio)功能取决于安装的芯片组和驱动程序。如果您没有看到Boost选项,您可以尝试以下操作:
- 更改连接麦克风的端口
- 运行录制音频疑难解答
- 更新驱动程序:更新声音(Sound)、麦克风(Microphone)和音频(Audio)驱动程序将有所帮助。如果是Realtek芯片组,您可以从Realtek获取更新的驱动程序。
为什么我的电脑不接我的麦克风?
转到Start > Settings > System > Sound。在Input中,转到选择您的输入设备,然后选择Device Properties。在“麦克风属性”窗口的“(Microphone Properties)级别(Levels)”选项卡上,您可以根据需要调整“麦克风(Microphone)”和“麦克风增强(Microphone Boost)”滑块,然后选择“确定”。
如何在Zoom中增加麦克风音量?
如果您想在Zoom会议期间调整音量,请选择麦克风图标旁边的箭头Mute/ Unmute,然后从下拉菜单中选择音频设置。(Audio Settings)使用滑块调整所选麦克风和扬声器的音量。
如何在 Windows 11/10 中增加麦克风音量?
在Windows 11/10计算机中增加麦克风音量需要检查两件事。首先(First)是实际音量。您可以使用任务栏(Taskbar)上的音量图标来完成它。第二个是麦克风增强(Microphone Boost)设置。默认情况下,它在Windows 11/10中设置为 0 dB 。但是,可以将其设置为 +40 dB。
阅读: (Read: )您的浏览器阻止访问您的麦克风 - 缩放错误。(Your browser is preventing access to your microphone – Zoom error.)
How to Boost or Increase Microphone Volume in Windows 11/10
While using voice-over-IP services such as Skype on your Windows 11/10/8/7 desktop, you may have observed sometimeѕ the quality of voice sinks. Under such circumstances, you may have to boost the volume tо recover thе audio quality. So if yоu think your Microphone vоlume is too low at times, this tip will tell you how to increase or booѕt microphone volume in Windows. Thіs post will also helр you if the Microphone Boost option is not availаble.
Increase Microphone Volume in Windows 11/10
To increase microphone volume in Windows 11/10, follow these steps:
- Right-click on the volume/sound icon on the Taskbar.
- Select the Sounds option.
- Switch to the Recording tab.
- Right-click on the microphone and select Properties.
- Go to the Levels tab.
- Set the Microphone Boost to +40 dB.
- Click the OK button.
Let’s check out these steps in detail.
From the Taskbar, right-side, right-click on the ‘Sound’ icon and from the options displayed select ‘Sounds’. However, if you are Windows 11, you need to follow this guide to open old Sound settings panel.
Right-click on the active microphone. The active microphone has a green checkmark marked against it. Depending upon the setup there may be multiple microphones present.
Again, right-click the active mic and select the ‘Properties’ option.
Then, under the Microphone Properties window, from the ‘General’ tab, switch to ‘Levels’ tab and adjust the boost level.
By default, the level is set at 0.0 dB. You can adjust it up to +40 dB using the slider provided.
Be sure to carry out the process during your conversation so that you get the feedback from the other end immediately. This will also tell you whether the adjustments made are appropriate or not.
Microphone volume levels too low
In rare cases, it has been observed that boosting the microphone volume may not solve your problem. If it is so, select the ‘Advanced’ tab from the ‘Microphone Properties’ window instead of ‘Levels’ and uncheck the option that reads as ‘Allow application to take executive control of this device‘.
Microphone Boost option not available
Audio features depend on the chipset and drivers installed. If you do not see the Boost option, you may try the following:
- Change the port to connect the Microphone
- Run the Recording Audio troubleshooter
- Update Drivers: Updating Sound, Microphone & Audio drivers will help. If it is a Realtek chipset, you can get the updated drivers from Realtek.
Why is my computer not picking up my mic?
Go to Start > Settings > System > Sound. In Input, go to Choose your input device, then select Device Properties. On the Levels tab of the Microphone Properties window, you can adjust the Microphone and Microphone Boost sliders as needed, and then select OK.
How do I increase microphone volume in Zoom?
If you want to adjust the volume during your meeting on Zoom, select the arrow next to the microphone icon for Mute/ Unmute and select Audio Settings from the drop-down menu. Use the sliders to adjust the volume for your selected microphone and speaker.
How do I increase my microphone volume Windows 11/10?
There are two things you need to check to increase your microphone volume in Windows 11/10 computer. First is the actual volume level. You can use the volume icon on the Taskbar to get it done. The second is the Microphone Boost setting. By default, it is set to 0 dB in Windows 11/10. However, it is possible to set it to +40 dB.
Read: Your browser is preventing access to your microphone – Zoom error.