随着Windows 10的推出，您将不会像以前在早期版本的Windows中那样使用^(Windows)控制面板^{(Control Panel)}启用或禁用Windows更新。这对用户不起作用，因为无论他们喜欢与否，他们都被迫下载和安装Windows 自动^{(Windows Automatic)}更新，但不用担心，因为有一种解决方法可以在Windows 10中禁用或关闭^{(Windows 10)}Windows 更新^{(Windows Update)}。

完全停止 Windows 10 更新 [指南]

主要问题是意外的系统重新启动，因为您的大部分时间都将用于更新和重新启动Windows 10，而当这种情况发生在您的工作中时，这个问题会变得令人沮丧。因此，不要浪费任何时间，让我们看看如何在下面列出的教程的帮助下完全停止Windows 10 更新。^(Update)

完全停止 Windows 10^{(Stop Windows 10)}更新 [指南]

注意：^(Note:)确保创建一个还原点^{(create a restore point)} 以防万一出现问题。

步骤 1：禁用 Windows 更新服务^{(Step 1: Disable Windows Update Service)}

1. 按 Windows 键 + R 然后键入services.msc并按 Enter。

services.msc 窗口 | 完全停止 Windows 10 更新 [指南]

2. 在服务列表中找到Windows Update，然后右键单击它并选择属性。^{(Properties.)}

右键单击 Windows 更新服务并在服务窗口中选择属性

3. 如果服务已经在运行，请单击停止^(Stop)，然后从启动类型^{(Startup type)}下拉列表中选择禁用。^(Disabled.)

单击停止并确保 Windows 更新服务的启动类型为禁用

4. 单击应用，然后单击确定。^(OK.)

5. 现在确保您没有关闭Windows 更新服务属性^{(Windows update service Properties)}窗口，切换到恢复选项卡。^{(Recovery tab.)}

6. 从“第一次失败^{(First failure)}”下拉列表中选择“不采取任何行动^{(Take No Action)}”，然后单击应用，然后单击确定。

在 Windows 更新服务属性窗口切换到恢复选项卡

7. 重新启动您的 PC 以保存更改。

步骤 2：使用组策略编辑器阻止自动 Windows 更新^{(Step 2: Block Automatic Windows Update using Group Policy Editor)}

1. 按 Windows 键 + R 然后键入gpedit.msc并按Enter打开本地组策略编辑器^{(Local Group Policy Editor)}。

gpedit.msc 正在运行

2.浏览^(Browse)到以下位置：

Computer Configuration > Administrative Templates > Windows Components > Windows Update

3. 确保在右侧窗格中选择Windows 更新^{(Windows Update)}，双击配置自动更新策略。^{(Configure Automatic Updates policy.)}

在 gpedit.msc 中的 Windows 更新下找到配置自动更新

4. 选中“已禁用^(Disabled)”以禁用自动Windows更新，然后单击“应用^(Apply)”，然后单击“确定”。

使用组策略编辑器禁用自动 Windows 更新 | 完全停止 Windows 10 更新 [指南]

替代方案：使用注册表阻止自动 Windows 更新^{(Alternative: Block Automatic Windows Update using Registry)}

1. 按 Windows 键 + R 然后键入regedit并按 Enter 打开注册表编辑器。^{(Registry Editor.)}

运行命令 regedit

2. 导航到注册表中的以下内容：

HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows

3. 右键单击 Windows 键^{(Windows key)}，然后选择New > Key.

右键单击 Windows 键，然后选择新建，然后单击键

4. 将此新创建的密钥命名为WindowsUpdate，然后按 Enter。

5. 再次右键单击WindowsUpdate ，然后选择New > Key.

右键单击 WindowsUpdate，然后选择新密钥

6. 将此新密钥命名为AU，然后按 Enter。

导航到 WindowsUpdate 注册表项

7. 右键单击 AU 键^{(AU key)}并选择New > DWORD (32-bit) Value.

右键单击 AU 键并选择新建然后 DWORD (32-bit) 值

8. 将此 DWORD 命名为NoAutoUpdate并按 Enter。

将此 DWORD 命名为 NoAutoUpdate 并按 Enter | 完全停止 Windows 10 更新 [指南]

9. 双击NoAutoUpdate DWORD并将其值更改为 1^{(change its value to 1)}，然后单击OK。

双击 NoAutoUpdate DWORD 并将其值更改为 1

10. 重新启动您的 PC 以保存更改。

第 3 步：将您的网络连接设置为按流量计费^{(Step 3: Set your Network Connection to Metered)}

1. 按 Windows 键 + I 打开设置^(Settings)，然后单击网络和 Internet^{(Network & Internet)}图标。

按 Windows 键 + I 打开设置，然后单击网络和 Internet

2. 从左侧菜单中，选择状态^(Status)，然后单击网络状态下的“更改连接属性”。^{(Change connection properties)}

选择状态，然后单击网络状态下的更改连接属性

3. 向下滚动到计量连接^{(Metered connection)}，然后启用“设置为计量连接^{(Set as metered connection)}”下的切换。

将您的 WiFi 设置为计量连接

4. 完成后关闭设置。

步骤 4：更改设备安装设置^{(Step 4: Change Device Installation Settings)}

1. 按 Windows 键 + R 然后键入sysdm.cpl并按 Enter 打开系统属性。^{( System Properties.)}

系统属性 sysdm

2. 切换到硬件选项卡^{(Hardware tab)}，然后单击“设备安装设置^{(Device Installation Settings)}”按钮。

切换到硬件选项卡并单击设备安装设置

3. 选择“否（您的设备可能无法按预期工作）^{(No (your device might not work as expected))} ”。

勾选 No 并单击 Save Changes | 完全停止 Windows 10 更新 [指南]

4. 单击保存^(Save)更改，然后单击确定关闭设置。

步骤 5：禁用 Windows 10 更新助手^{(Step 5: Disable Windows 10 Update Assistant)}

1. 按 Windows 键 + R 然后键入taskschd.msc并按 Enter 打开任务计划程序。^{( Task Scheduler.)}

按 Windows 键 + R 然后键入 Taskschd.msc 并按 Enter 打开任务计划程序

2. 现在导航到以下设置：

Task Scheduler >Task Scheduler Library > Microsoft > Windows > UpdateOrchestrator

3. 确保选择UpdateOrchestrator，然后在右侧窗格中双击Update Assistant。

选择 UpdateOrchestrator 然后在右侧窗格中双击 Update Assistant

4. 切换到触发器选项卡^{(Triggers tab)}，然后禁用每个触发器。^{( disable each trigger.)}

切换到触发器选项卡，然后禁用每个触发器以禁用 Windows 10 更新助手

5. 单击应用，然后单击确定。

可选步骤：使用 3rd 方工具停止 Windows 10 更新^{(Optional Step: Use 3rd party tools to Stop Windows 10 Updates)}

1. 使用Windows Update Blocker阻止Windows 10完全更新。

2. Win Update Stop是一款免费工具，可让您在Windows 10上禁用^{(Windows 10)}Windows 更新^{(Windows Updates)}

受到推崇的：^{(Recommended:)}

修复 Windows 10 中的 Microsoft 兼容性遥测高磁盘使用率^{(Fix Microsoft Compatibility Telemetry High Disk Usage in Windows 10)}
Windows Update Stuck at 0% [SOLVED]
如何修复 Windows 10 中缺少的 NVIDIA 控制面板^{(How to Fix NVIDIA Control Panel Missing in Windows 10)}
修复集成网络摄像头在 Windows 10 上不起作用^{(Fix Integrated Webcam Not Working on Windows 10)}

就是这样，您已经成功学习了如何完全停止 Windows 10 更新^{(How to Stop Windows 10 Update Completely)}，但是如果您对本教程仍有任何疑问，请随时在评论部分询问他们。

Stop Windows 10 Update Completely [GUIDE]

With the introduсtion of Windows 10, you won’t enаble or disable Windows updates using Control Panel as you used to be in the еarlier version of Windows. This doesn’t work for υsers as they are forced to download and install the Windows Automatic υpdates whether they like or nоt bυt don’t worry as there іs a wоrkaround this problem to disable or turn off Windows Update in Windows 10.

The main issue is the unexpected system restart because most of your time will go into updating and restarting your Windows 10, and this issue becomes frustrating when this happens in the middle of your work. So without wasting any time, let’s see How to Stop Windows 10 Update Completely with the help of the below-listed tutorial.

Stop Windows 10 Update Completely [GUIDE]

Note: Make sure to create a restore point just in case something goes wrong.

Step 1: Disable Windows Update Service

1. Press Windows Key + R then type services.msc and hit Enter.

services.msc windows | Stop Windows 10 Update Completely [GUIDE]

2. Find Windows Update in the services list, then right-click on it and select Properties.

Right click on Windows Update service and select Properties in Service window

3. If the service is already running, click on Stop then from the Startup type drop-down select Disabled.

Click stop and make sure Startup type of Windows Update service is Disable

4. Click Apply, followed by OK.

5. Now make sure you don’t close the Windows update service Properties window, switch to Recovery tab.

6. From the “First failure” drop-down select “Take No Action” then click Apply followed by OK.

In Windows update service Properties window switch to Recovery tab

7. Reboot your PC to save changes.

Step 2: Block Automatic Windows Update using Group Policy Editor

1. Press Windows Key + R then type gpedit.msc and hit Enter to open Local Group Policy Editor.

gpedit.msc in run

2. Browse to the following location:

Computer Configuration > Administrative Templates > Windows Components > Windows Update

3. Make sure to select Windows Update in the right window pane double-click on Configure Automatic Updates policy.

Under Windows Update in gpedit.msc find Configure Automatic Updates

4. Checkmark “Disabled” to disable Automatic Windows updates and then click Apply followed by OK.

Disable Automatic Windows Update using Group Policy Editor | Stop Windows 10 Update Completely [GUIDE]

Alternative: Block Automatic Windows Update using Registry

1. Press Windows Key + R then type regedit and hit Enter to open Registry Editor.

Run command regedit

2. Navigate to the following inside Registry:

HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows

3. Right-click on the Windows key then selects New > Key.

Right-click the Windows key then select New and then click on Key

4. Name this newly created key as WindowsUpdate and hit Enter.

5. Again right-click on WindowsUpdate then select New > Key.

Right-click on WindowsUpdate then select New Key

6. Name this new key as AU and hit Enter.

Navigate to WindowsUpdate Registry key

7. Right-click on AU key and select New > DWORD (32-bit) Value.

Right-click on AU key and select New then DWORD (32-bit) Value

8. Name this DWORD as NoAutoUpdate and press Enter.

Name this DWORD as NoAutoUpdate and press Enter | Stop Windows 10 Update Completely [GUIDE]

9. Double-click on NoAutoUpdate DWORD and change its value to 1 and click OK.

Double-click on NoAutoUpdate DWORD & change its value to 1

10. Reboot your PC to save changes.

Step 3: Set your Network Connection to Metered

1. Press Windows Key + I to open Settings then click on Network & Internet icon.

Press Windows Key + I to open Settings then click on Network & Internet

2. From the left-hand menu, select Status, then click on “Change connection properties” under Network status.

Select Status then click on Change connection properties under Network status

3. Scroll down to Metered connection then enable the toggle under “Set as metered connection“.

Set your WiFi as Metered Connection

4. Close Settings when finished.

Step 4: Change Device Installation Settings

1. Press Windows Key + R then type sysdm.cpl and hit Enter to open System Properties.

system properties sysdm

2. Switch to Hardware tab then click on “Device Installation Settings” button.

Switch to Hardware tab and click Device Installation Settings

3. Select “No (your device might not work as expected)“.

Check mark on the No and click Save Changes | Stop Windows 10 Update Completely [GUIDE]

4. Click on Save changes then click OK to close settings.

Step 5: Disable Windows 10 Update Assistant

1. Press Windows Key + R then type taskschd.msc and hit Enter to open Task Scheduler.

press Windows Key + R then type Taskschd.msc and hit Enter to open Task Scheduler

2. Now navigate to the following settings:

Task Scheduler >Task Scheduler Library > Microsoft > Windows > UpdateOrchestrator

3. Make sure to select UpdateOrchestrator then in the right window pane double-click on Update Assistant.

Select UpdateOrchestrator then in the right window pane double-click on Update Assistant

4. Switch to the Triggers tab then disable each trigger.

Switch to Triggers tab then disable each trigger to Disable Windows 10 Update Assistant

5. Click Apply, followed by OK.

Optional Step: Use 3rd party tools to Stop Windows 10 Updates

1. Use Windows Update Blocker to stop Windows 10 from updating completely.

2. Win Update Stop is a free tool that allows you to disable Windows Updates on Windows 10

Recommended:

That’s it you have successfully learned How to Stop Windows 10 Update Completely but if you still have any queries regarding this tutorial then feel free to ask them in the comment’s section.

瑛武

About the author

我是一名专业的音频工程师，拥有超过 10 年的经验。我参与过各种各样的项目，从小型家庭音响系统到大型商业制作。我的技能在于创造出色的配乐和声音处理工具，让音乐听起来很棒。我对 Windows 10 也非常有经验，可以帮助您充分利用您的计算机系统。

完全停止 Windows 10 更新 [指南]

完全停止 Windows 10(Stop Windows 10)更新 [指南]

步骤 1：禁用 Windows 更新服务(Step 1: Disable Windows Update Service)

步骤 2：使用组策略编辑器阻止自动 Windows 更新(Step 2: Block Automatic Windows Update using Group Policy Editor)

替代方案：使用注册表阻止自动 Windows 更新(Alternative: Block Automatic Windows Update using Registry)

第 3 步：将您的网络连接设置为按流量计费(Step 3: Set your Network Connection to Metered)

步骤 4：更改设备安装设置(Step 4: Change Device Installation Settings)

步骤 5：禁用 Windows 10 更新助手(Step 5: Disable Windows 10 Update Assistant)

可选步骤：使用 3rd 方工具停止 Windows 10 更新(Optional Step: Use 3rd party tools to Stop Windows 10 Updates)

Stop Windows 10 Update Completely [GUIDE]

Stop Windows 10 Update Completely [GUIDE]

Step 1: Disable Windows Update Service

Step 2: Block Automatic Windows Update using Group Policy Editor

Alternative: Block Automatic Windows Update using Registry

Step 3: Set your Network Connection to Metered

Step 4: Change Device Installation Settings

Step 5: Disable Windows 10 Update Assistant

Optional Step: Use 3rd party tools to Stop Windows 10 Updates

瑛 武

About the author

Related posts

在Windows 10中添加Printer [指南]

如何在Windows 10中Delete Win Setup Files [指南]

Stop Windows 10自动安装Realtek Audio Drivers

禁用Windows 10中的Lock Screen [指南]

如何在Windows 10上Enter BIOS [指南]

禁用Active Hours Windows 10 Update

Windows 10缺少Pin至Start Menu Option [已解决]

修复无法在 Windows 10 中安装累积更新 KB5008212

Action Center不适用于Windows 10 [已解决]

WiFi在Windows 10中断断开连接[已解决]

Windows 10缺少Fix MSVCR120.dll [已解决]

Stop Windows 10从升级到下一个版本或安装功能Update

如何在Windows 10上使用Performance Monitor（Detailed GUIDE）

在Windows 10中创建Full System Image Backup [终极指南]

Windows 10上的Reset Network Data Usage [指南]

停止 Windows 10 自动删除缩略图缓存

修复 Windows 10 中的键盘输入延迟 [已解决]

如何Slipstream Windows 10 Installation（Step-by-Step Guide）

Windows 10上的Computer Restarts Randomly [已解决]

如何在Windows 10上Fix Avast Update Stuck

完全停止 Windows 10^{(Stop Windows 10)}更新 [指南]

步骤 1：禁用 Windows 更新服务^{(Step 1: Disable Windows Update Service)}

步骤 2：使用组策略编辑器阻止自动 Windows 更新^{(Step 2: Block Automatic Windows Update using Group Policy Editor)}

替代方案：使用注册表阻止自动 Windows 更新^{(Alternative: Block Automatic Windows Update using Registry)}

第 3 步：将您的网络连接设置为按流量计费^{(Step 3: Set your Network Connection to Metered)}

步骤 4：更改设备安装设置^{(Step 4: Change Device Installation Settings)}

步骤 5：禁用 Windows 10 更新助手^{(Step 5: Disable Windows 10 Update Assistant)}

可选步骤：使用 3rd 方工具停止 Windows 10 更新^{(Optional Step: Use 3rd party tools to Stop Windows 10 Updates)}

瑛武