由于Xbox One是一款视频游戏系统，因此很明显声音输出对于游戏玩家获得适当体验很重要。这就是为什么当Xbox One控制台因为不理想而无法提供声音时这是一个大问题的原因。现在最大的问题是声音问题是否可以解决。这个问题的答案是，是的，它可以用几分钟的时间来解决。请记住(Bear)，如果硬件损坏，我们将要讨论的是无法修复声音问题。
Xbox One 音频无法正常工作
如果在Xbox One(Xbox One)上玩游戏时没有音频(Audio)或声音(Sound)，您需要注意以下几点：
- 检查音量等
- 检查您的电视和 HDMI 连接
- 修复(Fix)应用和游戏的音频问题
- 解决(Troubleshoot)音频视频接收器的问题
1]基本解决方案
检查您的电视或显示器上的音量是否没有静音或调低到听不见的水平。此外，如果您使用的是外接扬声器，请检查它是否连接正确，并确保它已打开。
2]检查(Check)您的电视和HDMI连接
在这种情况下，首先要做的是打开指南。通过按下控制器上的Xbox按钮来执行此操作。(Xbox)选择选项，System > Settings > Display和声音> Video输出。然后，下一步是选择Video fidelity & overscan，然后找到HDMI按钮并单击它。
3]修复(Fix)应用程序和游戏的音频问题
好的，所以在涉及音频的情况下一切正常，语音聊天处于活动状态时的应用程序和游戏除外。最好的选择是调整聊天(Chat)混音器。为此，我们按下控制器上的Xbox按钮，然后导航到System > Settings > Display和声音。
之后，用户现在必须选择音量> Chat混音器，然后从可用选项之一中进行选择。
相关(Related)：游戏音频在 Windows PC 上停止工作
4]解决音频视频接收器的声音问题
我们中的一些人倾向于通过直接连接到电视或计算机显示器的音频接收器来连接Xbox One 。有时这样的装置可能会在输出声音方面出现问题，因此为了重新设置正确，用户需要做一些事情。
事情是这样的，用户必须按照下面列出的特定顺序打开每个设备，然后再继续。
继续前进，是时候按下电视或捆绑遥控器上的“输入”按钮了。这个想法是将接收器从控制台切换到HDMI端口之一。完成这些操作后，重新启动音频接收器，然后将电视的连接设置为HDMI。
最后，拿起Xbox One控制器并单击Xbox按钮。Select System > Settings > Display和声音> Video输出，然后选择视频保真度(Video fidelity)和过扫描，最后从可用选项中选择HDMI。
现在，在完成这些步骤后，用户现在必须测试是否正在通过正在使用的扬声器接收音频。如果不是，那么问题很可能与 Xbox One 的硬件有很大关系，这可能意味着要对其进行维修或完全购买新的硬件。
希望我们的建议足够好，因为 Xbox One 并不便宜，尤其是如果您来自 X 机型。(Let’s hope our tips are good enough because an Xbox One is not cheap, especially if you’re from the X model.)
No Audio or Sound when playing games on Xbox One
Since the Xbox One is a vidеo gаme system, it shоuld then bе vеry clear that sound outрut is important for gamers to gain the proper experіence. That is why it’s a huge problem when an Xbox One consоlе fаils to deliver sound because it’s not ideal. The big question right now is whether or not the sound problem сan be fixed. The answer to that qυestion is, yes, it can be fixed with a few minutes of your time. Bear in mind that what we’re going to talk about is not able to fix the sound problem if the hardware is damagеd.
Xbox One audio not working
Here are a few things you need to look at if there is no Audio or Sound when playing games on Xbox One:
- Check the Volume, etc
- Check your TV and HDMI connections
- Fix audio problems with apps and games
- Troubleshoot around issues with an audio-video receiver
1] Basic solutions
Check if the volume on your television or monitor is not muted or turned down to a level too low to hear. Furthermore, if you’re using an external speaker, check if it’s connected properly, and make sure it’s turned on.
2] Check your TV and HDMI connections
The first thing to do in this situation is to open the guide. Do this by pressing the Xbox button on the controller. Select the options, System > Settings > Display & sound > Video output. The next step, then, is to select Video fidelity & overscan, then seek out the HDMI button and click on it.
3] Fix audio problems with apps and games
OK, so everything is working where audio is concerned, except for apps and games when voice chat is active. The best option to take is to adjust the Chat mixer. We do that by pressing the Xbox button on the controller, then navigate to System > Settings > Display & sound.
After that, the user must now select Volume > Chat mixer, then choose from one of the available options.
Related: Game audio stops working on Windows PC
4] Troubleshooting sound issues with an audio-video receiver
Some of us tend to connect the Xbox One though an audio receiver that is linked directly to the television or computer monitor. Some times such a contraption might have problems with outputting sound, so in order to set things straight again, the user will need to do a few things.
Here’s the thing, the user must turn on each device in the particular order listed below before moving forward.
- Television
- Audio-video receiver
- Xbox One console
Moving on, it’s time to press the “Input” button on your television or the bundled remote control. The idea is to switch the receiver away from the console and to one of the HDMI ports. After doing such things, restart the audio receiver, then set the television’s connection to HDMI.
Finally, pick up the Xbox One controller and click the Xbox button. Select System > Settings > Display & sound > Video output, then Video fidelity & overscan, and finally, select HDMI from the options available.
Now, after completing these steps, the user must now test to see if audio is being received through the speakers in use. If not, then chances are the problem has much to do with the Xbox One’s hardware, and that could mean having it repaired or purchasing a new one entirely.
Let’s hope our tips are good enough because an Xbox One is not cheap, especially if you’re from the X model.
