更改远程桌面的侦听端口： ^{(Change the listening port for Remote Desktop: )}远程桌面^{(Remote Desktop)}是Windows的一项非常重要的功能，它允许用户连接到另一个位置的计算机并与该计算机进行交互，就好像它就在本地一样。例如，您正在工作并且想要连接到您的家用 PC，那么如果您的家用 PC 上启用了RDP ，那么您可以轻松地做到这一点。^(RDP)默认情况下，RDP（远程桌面协议^{(Remote Desktop Protocol)}）使用端口 3389，因为它是一个通用端口，所以每个用户都有关于此端口号的信息，这可能会导致安全风险。因此，强烈建议更改远程桌面连接^{(Remote Desktop Connection)}的侦听端口，并按照下面列出的步骤进行操作。

更改远程桌面的侦听端口^{(Remote Desktop)}

确保 创建一个还原点^{(create a restore point)} 以防万一出现问题。

1.按 Windows 键 + R 然后键入regedit并按 Enter 打开注册表编辑器。^{(Registry Editor.)}

2.导航到以下注册表项：

HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\TerminalServer\WinStations\RDP-Tcp\

3.现在确保您在左窗格中突出显示了RDP-Tcp，然后在右窗格中查找子项“ PortNumber。“

4.找到PortNumber后，双击它以更改其值。确保在Base下选择Decimal以查看编辑其值。

5.您应该会看到默认值(3389)，但要更改它的值，请键入介于1025 和 65535^{(1025 and 65535)}之间的新端口号，然后单击确定。

6.现在，每当您尝试使用远程桌面连接^{(Remote Desktop Connection)}连接到您的家用电脑（您更改了端口号）时，请确保输入新的端口号。^{(new port number.)}

注意：^(Note:)您可能还需要更改防火墙配置^{( firewall configuration)}以允许使用新端口号，然后才能使用远程桌面连接连接到此计算机。^{(Remote Desktop Connection.)}

7. 要检查结果，使用管理员权限运行 cmd 并键入：netstat -a

添加自定义入站规则以允许端口通过Windows 防火墙^{(Windows Firewall)}

1.按Windows Key + X然后选择控制面板。^{(Control Panel.)}

2.现在导航到System and Security > Windows Firewall.

3.从左侧菜单中选择高级设置。^{(Advanced Settings)}

4.现在选择左侧的入站规则。^{(Inbound Rules)}

5.转到操作^{( Action)}，然后单击新规则。^{(New Rule.)}

6.选择端口^(Port)并单击下一步。

7.接下来，选择 TCP（或 UDP）^{( select TCP (or UDP))}和特定^(Specific)本地端口，然后指定要允许连接的端口号。

8.在下一个窗口中选择允许连接。^{( Allow the connection)}

9.从Domain、Private、Public中选择你需要的选项（private和public是你连接新网络时选择的网络类型， Windows要求你选择网络类型，域显然是你的域）。

10.最后，在接下来显示的窗口中写下名称和描述^{(Name and Description)}。单击完成。^(Finish.)

为你推荐：^{(Recommended for you:)}

• 修复 Internet Explorer 无法显示网页错误^{(Fix Internet Explorer cannot display the webpage error)}
• 在 Windows 中将 TrustedInstaller 还原为文件所有者^{(Restore TrustedInstaller as File Owner in Windows)}
• 修复 Windows 10 亮度设置不起作用^{(Fix Windows 10 Brightness Settings Not Working)}
• 修复 Windows 的 5 种方法检测到 IP 地址冲突^{(5 ways to fix Windows has detected an IP address conflict)}

就是这样，您已经成功学习了如何更改远程桌面的侦听端口，^{(How to Change the listening port for Remote Desktop)}如果您对这篇文章仍有任何疑问，请随时在评论部分询问他们。

Change the listening port for Remote Desktop

Change the listening port for Remote Desktop: Remote Desktop is a very important feature of Windows which allows users to connect to a computer in another location and interact with that computer as if it’s present locally. For example, you are at work and you want to connect to your home PC then you can easily do if RDP is enabled on your home PC. By default, RDP (Remote Desktop Protocol) uses port 3389 and since it’s a common port, every user has information about this port number which can lead to a security risk. So it’s highly recommended to change the listening port for Remote Desktop Connection and to do so follow the below-listed steps.

Change the listening port for Remote Desktop

Make sure to create a restore point just in case something goes wrong.

1.Press Windows Key + R then type regedit and hit Enter to open Registry Editor.

2.Navigate to the following registry key:

HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\TerminalServer\WinStations\RDP-Tcp\

3.Now make sure you have highlighted RDP-Tcp in the left pane then in the right pane look for the subkey “PortNumber.“

4.Once you have found PortNumber then double-click on it to change its value. Make sure to select Decimal under Base to see the edit its value.

5.You should see the default value (3389) but in order to change it’s value type a new port number between 1025 and 65535, and click OK.

6.Now, whenever you try to connect to you home PC (for which you changed the port number) using Remote Desktop Connection, make sure to type in the new port number.

Note: You may also need to change the firewall configuration in order to allow the new port number before you can connect to this computer using Remote Desktop Connection.

7.To check the result run cmd with administrative rights and type: netstat -a

Add a custom inbound rule to allow the port through the Windows Firewall

1.Press Windows Key + X then select Control Panel.

2.Now navigate to System and Security > Windows Firewall.

3.Select Advanced Settings from the left-hand side menu.

4.Now select Inbound Rules on the left.

5.Go to Action then click on New Rule.

6.Select Port and click Next.

7.Next, select TCP (or UDP) and Specific local ports, and then specify the port number which you want to allow connection for.

8.Select Allow the connection in the next window.

9.Select the options which you need from Domain, Private, Public (private and public are the network types that you select when you connect to the new network, and Windows ask you to select the network type, and the domain is obviously your domain).

10.Finally, write a Name and Description in the window that shows next. Click Finish.

Recommended for you:

• Fix Internet Explorer cannot display the webpage error
• Restore TrustedInstaller as File Owner in Windows
• Fix Windows 10 Brightness Settings Not Working
• 5 ways to fix Windows has detected an IP address conflict

That’s it you have successfully learned How to Change the listening port for Remote Desktop if you still have any queries regarding this post feel free to ask them in the comment’s section.

Related posts

• 在2分钟内启用Windows 10上的Remote Desktop

• 如何在 Windows 10 上使用远程桌面应用程序

• 修复远程桌面不会在Windows 10中Connect

• 如何在Remote Desktop Session中发送Ctrl+Alt+Delete

• 如何在 Windows 11 上启用 Chrome 远程桌面

• 如何使用 Mac 远程桌面控制 Windows PC

• 使用远程桌面连接从 Ubuntu 连接到 Windows PC

• 在Windows 10中无法在Remote Desktop Session中复制Paste

• Fix Desktop Window Manager High CPU（DWM.exe）

• Windows 10中恢复Old Desktop Icons

• 您的凭据在Windows 11/10上的Remote Desktop不起作用

• 如何阻止您的Windows PC上的Remote Desktop

• RDWEB中RDWEB中缺少Edge browser Edge browser Remote Desktop tab

• Fix Desktop Icons Windows 10创建者更新后继续重新排列

• NoMachine为Windows PC是一个免费的便携式Remote Desktop Tool

• Remote Desktop不工作或不会Windows 10连接

• 增加Windows 11/10中Remote Desktop Connections的数量

• 从Windows 10中从Desktop中删除Internet Explorer icon

• 如何在Discord上报告User（Desktop or Mobile）

• Windows 10 Best免费Remote Desktop software