Minecraft以低分辨率和块状游戏而闻名，但一些 mod 可以使Minecraft看起来绝对漂亮——但代价是对你的系统造成严重负担(seriously taxing your system)。OptiFine是Minecraft的一个图形优化模组，可以提高性能和帧速率。
了解如何正确下载和安装OptiFine将使您能够使用各种纹理模块来改变Minecraft的外观和感觉，同时对游戏性能的影响最小。
如何下载 OptiFine(How to Download OptiFine)
虽然您可以在不同的网站上找到OptiFine下载，但最值得信赖的来源是OptiFine 官方网站。(official OptiFine site.)
- 选择您要下载的OptiFine版本（推荐使用(OptiFine)OptiFine Ultimate）并选择下载。 (Download. )
- 在实际下载页面出现之前，您将需要观看广告（或选择右上角的跳过）。(Skip)再次选择下载(Download)。
- OptiFine 以.jar 文件(.jar file)的形式下载，并且通常会引发安全警告。OptiFine 的网站和下载在通过 Norton 的Safe Web(Safe Web)等服务运行时通过了安全检查，因此您可以放心地忽略警告。
如何安装 OptiFine(How to Install OptiFine)
当您打开文件开始安装过程时，会弹出如下所示的警报。这是 mod 正常工作所必需的。选择安装(Install)。
(OptiFine)看到消息“OptiFine 已成功安装”后，即可使用OptiFine 。(OptiFine)” 使用(” Using)和定制OptiFine是乐趣（和复杂性）发挥作用的地方。
如何使用 OptiFine(How to Use OptiFine)
您无需从Minecraft单独运行OptiFine即可利用它添加的所有功能。
- 从Minecraft启动器中选择OptiFine 。选择播放(Play)。
- 选择选项(Options )>视频设置。 (Video Settings. )
- 将光标悬停(Hover)在下面显示的选项上，以查看有关它们如何提高游戏性能的详细信息。
- 虽然您可以关闭所有动画以提高帧率，但这会使游戏看起来更糟。为此，请选择选项(Options )>视频设置(Video Settings )>动画(Animations )>全部关闭。(All OFF.)如果您的GPU 可以处理它(GPU can handle it)，请打开动画。
- 如果您想让游戏看起来特别 棒，请下载着色器包。(shader packs)
- 着色器包总是被压缩的。解压缩文件夹并将其移动到OptiFine创建的Minecraft着色器文件夹中。你可以在C:\Users\yourID\AppData\Roaming\.minecraft\shaderpacks找到它。
- 您也可以通过选择选项(Options )>视频设置(Video Settings )>着色器(Shaders )>着色器文件夹来访问它。(Shaders Folder.)
- 然后，您可以从着色器(Shader)选项中选择着色器包。当您开始游戏时，着色器将就位。
- 详细信息(Details)选项可以帮助您微调性能。您可以选择是否希望云看起来逼真或块状，是否可以看穿树木或它们是否是固体物体，甚至可以调整太阳和月亮的外观。
- 在后台运行的模组(Mod)包也会影响游戏的性能。例如，像 Sky Factory 或 Stoneblock 这样的模组包(mod pack like Sky Factory or Stoneblock)结合了许多较小的模组。OptiFine 可以通过微妙的方式帮助提高性能。
注意：(Note: ) 如果您的旧机器无法处理密集的 mod 包，则将Sky Factory 之(Sky Factory)类的包与着色器结合起来并不是一个好主意。在许多情况下，模组包会用其自定义纹理覆盖着色器纹理，并导致游戏看起来脱节和不匹配。
- 如果您的机器可以处理光线追踪，那么光线追踪着色器和纹理包(ray traced shaders and texture packs)会让您大吃一惊。
慢慢来，使用OptiFine来优化您的Minecraft性能。游戏将看起来更好，运行更流畅，并为您提供与以前 完全不同的体验。(altogether different experience)
How to Download and Install OptiFine in Minecraft
Minecraft has a reputation for being a low-resolution аnd blocky game, but some mods can make Minecraft look absоlutely beautiful–at the сost of seriously taxing your system. OptiFine is a graphics optimization mod for Minecraft that can improve performance and frame rate.
Understanding how to correctly download and install OptiFine will allow you to use various texture mods to change the look and feel of Minecraft with minimal impact on the game’s performance.
How to Download OptiFine
Although you can find OptiFine for download on different websites, the most trustworthy source is the official OptiFine site.
- Choose the version of OptiFine you want to download (OptiFine Ultimate is the recommended option) and select Download.
- You will need to sit through an ad (or select Skip in the top-right corner) before the actual download page appears. Select Download again.
- OptiFine downloads as a .jar file and will often throw a security warning. OptiFine’s website and downloads pass safety checks when run through a service like Norton’s Safe Web, so you can safely ignore the warning.
How to Install OptiFine
When you open the file to begin the installation process, the alert shown below pops up. This is necessary for the mod to work properly. Select Install.
OptiFine is available for use after you see the message, “OptiFine is successfully installed.” Using and customizing OptiFine is where the fun (and the complication) comes into play.
How to Use OptiFine
You don’t need to run OptiFine separately from Minecraft to take advantage of all the features it adds.
- Choose OptiFine from the Minecraft launcher. Select Play.
- Select Options > Video Settings.
- Hover your cursor over the options shown below to see details on what they do to improve your game’s performance.
- While you can turn all animations off to improve your framerate, it makes the game look worse. To do this, select Options > Video Settings > Animations > All OFF. If your GPU can handle it, leave animations on.
- Download shader packs if you want to make the game look particularly great.
- Shader packs are always zipped. Unzip the folder and move it into the Minecraft shader folder that OptiFine creates. You can find this at C:\Users\yourID\AppData\Roaming\.minecraft\shaderpacks.
- You can also access it by selecting Options > Video Settings > Shaders > Shaders Folder.
- You can then choose the shader pack from within the Shader options. When you start the game, the shader will be in place.
- The Details options can help you fine-tune your performance. You can choose whether you want clouds to look realistic or blocky, whether you can see through trees or if they are solid objects, and even tweak the sun and moon’s appearance.
- Mod packs that have a lot going on in the background can also affect the game’s performance. For instance, a mod pack like Sky Factory or Stoneblock combines numerous smaller mods. OptiFine can help eke out a bit more performance in subtle ways.
Note: If you have an older machine that can’t handle intense mod packs, combining a pack like Sky Factory with shaders is not a good idea. In many cases, the mod pack will overwrite the shader textures with its custom textures and cause the game to look disjointed and mismatched.
- If your machine can handle raytracing, there are ray traced shaders and texture packs that will blow you away.
Take your time and play around with OptiFine to optimize your Minecraft performance. The game will look better, run smoother, and give you an altogether different experience than before.
