经常玩Forza Horizon 4的游戏玩家有一天可能会遇到称为IPsec 错误的错误(IPsec errors)。随附的错误代码可能是0x8923203f、0x89232000、0x80600208、0x801901F4或0x89232001。我们了解到,只有在Windows 11/10和Xbox游戏机上玩游戏的人才会遇到此问题。这是一件大事;因此,我们将研究一劳永逸地解决它的方法。
什么导致Forza Horizon 4中的 IPsec 错误?
Forza Horizon 4 IPSEC错误通常是由网络和 Internet 连接问题引起的。收到的错误信息是:
Unable to join session…
IPSEC: 0x8923203f, 0x89232000, 0x80600208, 0x801901F4 or 0x89232001
Failed to Resolve the Server Address. Check your DNS Settings and Try Again.
如何修复IPsec:0X89232001 错误代码
您可以按照以下建议在 PC 或 Xbox 上修复Forza Horizon 4 IPSEC 错误代码 0x8923203f(IPSEC Error Codes 0x8923203f)、0x89232000、0x80600208、0x801901F4 或 0x89232001:
- 检查 Forza 服务器是否在线
- 将Windows PC(Update Windows PC)、游戏(Game)、Xbox 控制台(Xbox Console)和路由器(Router)更新到最新版本
- 运行网络重置并查看
- 确保(Make)您的路由器没有使用Teredo过滤器
- 检查您的路由器或防火墙是否阻止XboxLive服务端口
- 关闭(Close)并重新启动IP 助手服务(IP Helper Service)
- 重新安装 Teredo 适配器
- 通过Xbox 设置(Xbox Settings)区域清除备用 Mac 地址。(Alternate Mac Address)
1] Forza Horizon服务器是否正常运行?
您应该检查的第一件事是专用服务器是否正常运行。使用 Down Detector 服务(Use a Down Detector service)查明服务器是否已关闭。如果它表明存在问题,那么您最好的选择是花时间去做其他事情,直到开发人员纠正了问题。
阅读(Read): Forza Horizon 4 Review: 5 things I loved about it!
2]将Windows PC(Update Windows PC)、游戏(Game)、Xbox 控制台(Xbox Console)和路由器(Router)更新到最新版本
您的Windows OS、Forza、Xbox软件或固件版本可能已过期。如果是这种情况,那么它可能会影响Forza Horizon 4的性能。为了解决此问题,请检查当时是否存在任何更新,然后下载并安装它们。
需要重新启动计算机,然后检查游戏现在是否按预期运行。
3]运行网络重置
打开 Windows 设置并运行网络重置(Run Network Reset),看看是否对您有帮助。
4]确保(Make)您的路由器没有使用Teredo过滤器
有可能修复错误的另一个选项是检查您的路由器是否使用Teredo过滤器。要找出答案,请导航至 设置(Settings) > 游戏(Gaming) > Xbox 网络(Xbox Network) 并检查 服务器连接(Server connectivity)。如果您看到世界Blocked,那么您的路由器很可能确实在使用Teredo过滤器。
- 通过路由器禁用 Teredo 过滤器:(Disable Teredo filter via router:)您必须在路由器的设置(Settings)区域中手动禁用此过滤器。完成后,您可以尝试再次运行Forza Horizon 4以查看运行是否顺利。
- 单击“修复”按钮:(Click the Fix It button:)在“服务器连接(Server Connectivity)”部分,我们建议单击“修复(Fix)”按钮,然后等待服务完成它的工作。最后,重新启动计算机,然后检查游戏。
- 检查是否禁用了 Windows 防火墙:(Check if Windows Firewall is disabled:)为了建立Teredo IPsec连接,必须首先启用 Windows 防火墙(Windows Firewall must first be enabled)。
- 可能阻止 Teredo(Firewall rule possibly blocking Teredo:)的防火墙规则:如果您想了解防火墙(Firewall)规则是否由于您使用的VPN而阻止Teredo ,那么您应该立即以管理员身份打开命令提示符工具。(Command Prompt)
从那里,运行以下命令:
netsh advfirewall firewall show rule 4jxr4b3r3du76ina39a98x8k2
如果返回以下消息,则您的 PC 没有阻止 Teredo:
没有符合指定条件的规则
现在,如果您遇到一条说明Teredo被阻止的规则,请复制并粘贴以下命令:
netsh advfirewall firewall set rule name="4jxr4b3r3du76ina39a98x8k2" new enable=no
尝试上述提示后,不要忘记启动游戏并检查错误是否仍然存在。
5]检查(Check)您的路由器或防火墙是否阻止XboxLive服务端口
您的防火墙或路由器是否阻止了 XboxLive(XboxLive)服务端口?如果您不知道XboxLive服务使用的端口,那么以下信息应该会有所帮助:
- 端口 88 (UDP)
- 端口 3074(UDP 和 TCP)
- 端口 53(UDP 和 TCP)
- 端口 80 (TCP)
- 端口 500 (UDP)
- 端口 3544 (UDP)
- 端口 4500 (UDP)
如果您的路由器或防火墙(Firewall)阻止了上述任何端口,请将它们释放。
6]关闭并重新启动IP Helper服务(IP Helper Service)
可能IP Helper Service卡住了,无法正常运行。错误代码 IPSEC(Error Code IPSEC) : 0X89232001确实可能是这种情况,那么我们该怎么办?好吧(Well),我们将按照副标题的建议进行。
好的,所以要重新启动IP Helper Service,您必须通过右键单击任务栏(Task Bar)并从菜单中选择任务管理器来启动(Task Manager)任务管理器。(Task Manager)完成后,请单击“服务(Services)”选项卡,然后向下滚动,直到遇到iphlpsvc。
右键单击(Right-click)该项目,然后立即单击“重新启动(Restart)”选项以使其自动关闭并重新启动。
7]重新安装Teredo适配器
重新安装Teredo适配器,看看是否有帮助。 以管理员身份打开命令提示符(Open Command Prompt as administrator)并执行以下命令:
netsh interface Teredo set state disable
然后打开Devices Manager > View选项卡 >显示隐藏的设备。展开网络(Expand Network)适配器,找到Teredo适配器,右键单击它并选择卸载(Uninstall)。
重新启动您的电脑并立即执行以下命令:
netsh interface Teredo set state type=default
问题应该得到解决。
8]通过Xbox设置(Xbox Settings)区域清除(Clear)备用Mac地址(Alternate Mac Address)
当谈到Xbox视频游戏机时,解决Forza Horizon 4错误很容易。这里要做的第一件事是清除备用(Alternate) Mac 地址(Mac Address),所以让我们看看如何完成这项工作。
立即退出游戏,然后启动控制台上的设置区域。(Settings)导航(Navigate)到常规(General)选项卡,然后确保选择网络设置(Network Settings)。最后,您需要打开Advanced Settings并转到Alternate Mac Address。点击Clear按钮,然后点击Restart。
控制台重新启动后,转到Advanced Network Settings,然后从该部分打开IP Settings并选择Automatic。查看DNS 设置(DNS Settings)并选择自动(Automatic)。最后,导航到备用端口选择(Alternate Port Selection)并单击自动(Automatic)。
启动Forza Horizon 4视频游戏并测试IPSEC 错误(IPSEC Error)是否已解决。
Fix Forza Horizon 4 IPsec Error - Unable to join session
Gamers whо plaу Forza Horizon 4 quite often may one day come across errors known as IPsec errors. The accompanying error codes could be 0x8923203f, 0x89232000, 0x80600208, 0x801901F4, or 0x89232001. We understand that only folks who play the game on Windows 11/10 and Xbox consoles have experienced this problem. It’s a big deal; therefore, we are going to look into ways to solve it once and for all.
What causes IPsec errors in Forza Horizon 4?
Forza Horizon 4 IPSEC Errors are typically caused due to network and internet connection issues. The error message received is:
Unable to join session…
IPSEC: 0x8923203f, 0x89232000, 0x80600208, 0x801901F4 or 0x89232001
Failed to Resolve the Server Address. Check your DNS Settings and Try Again.
How to fix IPsec: 0X89232001 error code
You can fix Forza Horizon 4 IPSEC Error Codes 0x8923203f, 0x89232000, 0x80600208, 0x801901F4 or 0x89232001 on PC or Xbox by following these suggestions:
- Check if Forza servers are online
- Update Windows PC, Game, Xbox Console & Router to the latest version
- Run Network Reset and see
- Make sure your router is not using a Teredo filter
- Check if your router or firewall are blocking XboxLive service ports
- Close and restart the IP Helper Service
- Reinstall the Teredo adapter
- Clear the Alternate Mac Address via the Xbox Settings area.
1] Are the Forza Horizon servers running without problems?
The first thing you should check is whether the dedicated servers are operating as they should. Use a Down Detector service to find out if the servers are down. If it indicates that there is a problem, then your best bet is to go and do something else with your time until the developers have rectified the issue.
Read: Forza Horizon 4 Review: 5 things I loved about it!
2] Update Windows PC, Game, Xbox Console & Router to the latest version
There is a chance that your version of Windows OS, Forza, Xbox software, or the firmware maybe is out of date. If this is the case, then it could affect the performance of Forza Horizon 4. In order to solve this issue, check if any updates are present at the time, then download and install them.
Restart your computer is required, then check if the game now works as intended.
3] Run Network Reset
Open Windows Settings and Run Network Reset and see if that helps you.
4] Make sure your router is not using a Teredo filter
Another option that has the potential to fix the error is to check if your router is using a Teredo filter. To find out, please navigate to Settings > Gaming > Xbox Network and check Server connectivity. If you see the world Blocked, then chances are your router is indeed using a Teredo filter.
- Disable Teredo filter via router: You will have to manually disable this filter from within your router’s Settings area. Once done, you can try and run the Forza Horizon 4 again to see if things are running smoothly.
- Click the Fix It button: From the Server Connectivity section, we suggest clicking on the Fix It button, then wait for the service to do its thing. Finally, restart your computer, then check the game.
- Check if Windows Firewall is disabled: In order to establish a Teredo IPsec connection, the Windows Firewall must first be enabled.
- Firewall rule possibly blocking Teredo: If you want to find out if a Firewall rule is blocking Teredo due to the VPN you’re using, then you should open the Command Prompt tool as an admin right away.
From there, run the following command:
netsh advfirewall firewall show rule 4jxr4b3r3du76ina39a98x8k2
If the following message is returned, then your PC is not blocking Teredo:
No rules match the specified criteria
Now, if you’ve come across a rule stating Teredo is blocked, then copy and paste the following command:
netsh advfirewall firewall set rule name="4jxr4b3r3du76ina39a98x8k2" new enable=no
After trying the above tips, do not forget to launch the game and check to see if the error still persists.
5] Check if your router or firewall are blocking XboxLive service ports
Is your Firewall or router blocking XboxLive service ports? If you have no idea of the ports used by the XboxLive service, then the following information should help:
- Port 88 (UDP)
- Port 3074 (UDP and TCP)
- Port 53 (UDP and TCP)
- Port 80 (TCP)
- Port 500 (UDP)
- Port 3544 (UDP)
- Port 4500 (UDP)
If your router or Firewall is blocking any of the above ports, then set them free.
6] Close and restart the IP Helper Service
Maybe the IP Helper Service is stuck and not operating as it usually does. This could indeed be the case for Error Code IPSEC: 0X89232001, so what can we do? Well, we will do as the sub-title suggests.
OK, so to restart the IP Helper Service, you must fire up the Task Manager by right-clicking on the Task Bar and select Task Manager from the menu. Once that is done, please click on the Services tab, then scroll down until you’ve come across iphlpsvc.
Right-click on the item, then hit the Restart option right away to have it automatically close and start again.
7] Reinstall the Teredo adapter
Reinstall the Teredo adapter and see if that helps. Open Command Prompt as administrator and execute the following command:
netsh interface Teredo set state disable
Then open Devices Manager > View tab > Show hidden devices. Expand Network adapters, locate the Teredo adapter, right-click on it and select Uninstall.
Restart your Pc and execute the following command now:
netsh interface Teredo set state type=default
The problem should be resolved.
8] Clear the Alternate Mac Address via the Xbox Settings area
When it comes down to the Xbox video game console, solving the Forza Horizon 4 error is easy. One of the first things to do here is to clear the Alternate Mac Address, so let us look at how to get this done.
Exit the game right now, then fire up the Settings area on the console. Navigate to the General tab, then be sure to choose Network Settings. Finally, you will want to open Advanced Settings and go to Alternate Mac Address. Hit the Clear button, then hit Restart.
After the console has restarted, go to Advanced Network Settings, and from that section, open IP Settings and choose Automatic. Look to DNS Settings and select Automatic. Finally, navigate to Alternate Port Selection and click on Automatic.
Launch the Forza Horizon 4 video game and test if the IPSEC Error has been resolved.