Fix CD/DVD drive not detected after upgrade to Windows 10: 如果您最近升级到Windows 10，您可能会遇到系统无法检测到CD/DVD您可以通过转到此 PC 或我的电脑^(Computer)来验证这一点，然后查找您的CD/DVD驱动器，如果找不到它们，那么您将面临此问题。此错误的主要原因似乎是Windows无法更新对应于CD/DVD的注册表值，因此出现了问题。因此，不要浪费任何时间，让我们看看如何实际解决此问题。

修复升级到 Windows 10 后未检测到 CD/DVD 驱动器

Fix CD/DVD修复升级到Windows 10后未检测到^{(Windows 10)}CD/DVD驱动器

确保创建一个还原点^{(create a restore point)} 以防万一出现问题。

方法 1：使用硬件和设备疑难解答^{(Method 1: Use the Hardware and Devices troubleshooter)}

1.按Windows key + R键打开运行^(Run)对话框。

2. 键入“控制^(control)”，然后按 Enter。

控制面板

3.在搜索框中，键入“疑难解答^{(troubleshooter)}”，然后单击“疑难解答”。^{(Troubleshooting.)}'

硬件和声音设备故障排除

4.在硬件和声音^{(Hardware and Sound)}项下，单击“配置设备^{(Configure a device)}”，然后单击下一步。

Windows Fix 无法识别您的 CD 或 DVD 驱动器

5.如果发现问题，请单击“应用此修复”。^{(Apply this fix.)}'

这应该Fix CD/DVD drive not detected after upgrade to Windows 10但如果没有，请尝试下一个方法。

方法 2：手动修复损坏的注册表项^{(Method 2: Manually fix corrupted registry entries)}

1.按Windows key + R键打开运行^(Run)对话框。

2.在运行^(Run)对话框中输入regedit ，然后^(regedit)回车^(Enter)。

运行对话框

3.现在转到以下注册表项：

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}

CurrentControlSet 控件类

4.在右窗格中搜索UpperFilters和LowerFilters。
请注意^(Note)，如果您找不到这些条目，请尝试下一个方法。

5.删除^(Delete)这两个条目。确保您没有删除UpperFilters.bak或LowerFilters.bak仅删除指定的条目。

6.退出注册表编辑器并重新启动计算机。^{(restart the computer.)}

如果以上没有解决“ Windows 无法识别您的 CD 或 DVD 驱动器^{(Your CD or DVD drive is not recognized by Windows)}”的问题，请继续。

方法三：更新或重装驱动^{(Method 3: Update or reinstall the driver)}

1.按Windows key + R键打开运行^(Run)对话框。

2.键入devmgmt.msc，然后按 Enter。

devmgmt.msc 设备管理器

3. 在设备管理器中，expand DVD/CD-ROM驱动器，右键单击 CD 和DVD设备，然后单击卸载。^(Uninstall.)

DVD 或 CD 驱动程序卸载

4.重新启动计算机。^{(Restart the computer.)}

计算机重新启动后，将自动安装驱动程序。这可以帮助您 Fix CD/DVD drive not detected after upgrade to Windows 10但有时它对某些用户不起作用，因此请遵循下一个方法。

方法 4：创建注册表子项^{(Method 4: Create a registry subkey)}

1.按Windows key + R t打开运行对话框。

2.键入regedit，然后按Enter。

运行对话框

3.找到以下注册表项：

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\atapi

4.在atapi^(atapi)键下新建一个键Controller0。

Controller0 和 EnumDevice1

4.选择Controller0键并创建新的 DWORD EnumDevice1。

5.将值从0（默认）更改为 1^{( 0(default) to 1)}，然后单击确定。

EnumDevice1 值从 0 到 1

6.重新启动您的计算机。

为你推荐：^{(Recommended for you:)}

如何删除 Autorun.inf 文件^{(How to Delete Autorun.inf file)}
修复系统还原未成功完成^{(Fix System Restore did not complete successfully)}
文件资源管理器不突出显示选定的文件或文件夹^{(File Explorer does not highlight selected files or folders)}
在 Windows 10 中启用缩略图预览的 5 种方法^{(5 Ways to enable Thumbnail preview in Windows 10)}

就是这样，您已经成功学习了Fix CD/DVD drive not detected after upgrade to Windows 10 的问题，如果您对本指南仍有任何疑问，请随时在评论中提问

Fix CD/DVD drive not detected after upgrade to Windows 10

Fix CD/DVD drive not detected after upgrade to Windows 10: If you have recently upgraded to Windows 10 that it’s possible that you might face this issue where your CD/DVD drive will not be detected by your system. You could verify this by going to This PC or My Computer and then look for your CD/DVD drive, if you can’t find them then you are facing this issue. The main cause of this error seems to be Windows not being able to update registry value which corrosponds to CD/DVD and hence the issue. So without wasting any time let’s see how to actually fix this issue.

Make sure to create a restore point just in case something goes wrong.

Method 1: Use the Hardware and Devices troubleshooter

1.Press the Windows key + R button to open the Run dialogue box.

2.Type ‘control‘ and then press Enter.

control pannel

3.Inside the Search box, type ‘troubleshooter‘ and then click ‘Troubleshooting.‘

troubleshooting hardware and sound device

4.Under the Hardware and Sound item, click ‘Configure a device‘ and click next.

Your CD or DVD drive is not recognized by Windows Fix

5.If the problem is found, click on ‘Apply this fix.‘

This should Fix CD/DVD drive not detected after upgrade to Windows 10 but if not then try the next method.

Method 2: Manually fix corrupted registry entries

1.Press the Windows key + R button to open the Run dialogue box.

2.Type regedit in the Run dialogue box, then press Enter.

Run dialogue box

3.Now go to the following registry key:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}

CurrentControlSet Control Class

4.In the right pane search for UpperFilters and LowerFilters.
Note if you can’t find these entry then try the next method.

5.Delete both of these entries. Make sure you are not deleting UpperFilters.bak or LowerFilters.bak only delete the specified entries.

6.Exit Registry Editor and restart the computer.

If the above didn’t solve ‘Your CD or DVD drive is not recognized by Windows‘ Problem then continue.

Method 3: Update or reinstall the driver

1.Press the Windows key + R button to open the Run dialogue box.

2.Type devmgmt.msc and then press Enter.

devmgmt.msc device manager

3.In Device Manager, expand DVD/CD-ROM drives, right-click the CD and DVD devices and then click Uninstall.

DVD or CD driver uninstall

4.Restart the computer.

After the computer restarts, the drivers will be automatically installed. This can help you Fix CD/DVD drive not detected after upgrade to Windows 10 but sometimes it doesn’t work for some users so follow the next method.

Method 4: Create a registry subkey

1.Press the Windows key + R to open the Run dialogue box.

2.Type regedit and then press Enter.

Run dialogue box

3.Locate the following registry key:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\atapi

4.Create a new key Controller0 under atapi key.

Controller0 and EnumDevice1

4.Select the Controller0 key and create new DWORD EnumDevice1.

5.Change the value from 0(default) to 1 and then click OK.

EnumDevice1 value from 0 to 1

6.Restart your computer.

Recommended for you:

That’s it you have successfully learned Fix CD/DVD drive not detected after upgrade to Windows 10 if you still have any questions regarding this guide then feel free to ask them in the comment’s

鑫赵

About the author

我是一名软件工程师，拥有 Xbox Explorer、Microsoft Excel 和 Windows 8.1 Explorer 方面的经验。业余时间，我喜欢玩电子游戏和看电视。我拥有犹他大学的学位，目前在一家国际公司担任软件工程师。

修复升级到 Windows 10 后未检测到 CD/DVD 驱动器

Fix CD/DVD修复升级到Windows 10后未检测到^{(Windows 10)}CD/DVD驱动器

方法 1：使用硬件和设备疑难解答^{(Method 1: Use the Hardware and Devices troubleshooter)}

方法 2：手动修复损坏的注册表项^{(Method 2: Manually fix corrupted registry entries)}

方法三：更新或重装驱动^{(Method 3: Update or reinstall the driver)}

方法 4：创建注册表子项^{(Method 4: Create a registry subkey)}

Fix CD/DVD drive not detected after upgrade to Windows 10