检查硬盘驱动器的健康状况是大多数计算机用户不会透露的一项重要任务。很有可能，他们不知道该怎么做，但是今天GSmartControl改变了。如果您以前没有听说过GSmartControl，那么它是一个旨在检查硬盘驱动器运行状况^{(check the health of your hard drive)}以确保其符合要求的程序。它在SMART数据的帮助下做到这一点，因此它的任务非常有效，因此，它是目前最好的程序之一。

检查硬盘的健康状况

从我对该软件的长期测试来看，我不得不说它运行得非常好，所以我将分享我们的想法以及如何使用它。

如何在Windows PC^(Windows)上使用GSmartControl

首先^(First)，该程序有两个版本的Windows。用户可以下载 32 位或 64 位版本，但请记住，这完全取决于硬件规格。现在，在下载并安装软件后，您将在启动后看到一个足够干净的屏幕。

该窗口将突出显示连接到您的计算机的驱动器。单击^(Click)首选驱动器，软件将提供有关驱动器信息、基本运行状况以及制造商名称的信息。在底部，有启用  SMART和自动离线数据收集^{(Auto Offline Data Collection)}的选项。

右键单击以获取更多选项^{(Right-click for more options)}

如果我们右键单击首选驱动器，我们将看到查看详细信息、重新读取数据、执行测试、启用智能和自动离线数据收集的能力。我们建议单击执行^(Perform) 测试^(Tests)以查看许多选项。

在本节中，用户将能够读取测试日志数据、错误日志、温度日志以及有关驱动器的一般信息。

还有“高级^(Advanced)”选项卡，它显示了很多信息，其中许多信息超出了我们的理解范围。本节适用于对SMART^(SMART)和硬盘内部工作原理有广泛了解的人。

其他常规选项^{(Other general options)}

要访问首选项^{(Preferences)}，请单击选项选项^(Options)卡，然后单击首选项^{(Preferences)}。在这里，用户将能够允许GSmartControl在启动时检查驱动器寿命、仅显示SMART驱动器或在^(SMART)驱动器^(Drive)图标下显示设备名称。此外，如果您安装了smartmontools，也可以利用这些工具。

总的来说，我们喜欢GSmartControl提供的功能。它并不太复杂，但也不是非常容易使用。此外，它是一个快速执行的免费程序，这无论如何都不足为奇。从sourceforge.net下载^(Download)软件。

GSmartControl is an easy way to check the health of your Hard Drive

Chеcking the health of your hard drive is an important task most computer υsers do not divulge. Chances are, they have no idea how to do it, but that chаnges todаy with GSmartControl. If you haven’t heard of GSmartControl before, it’s a program designed to check the health of your hard drive to make sure it’s up to snuff. It does this with the help of SMART data, so it’s quite efficient at its task, and as such, one of the best programs out there.

Check the health of your Hard Drive

From my long test of the software, I have to say it works really well, so I’m going to share our thoughts along with how to use it.

How to use GSmartControl for Windows PC

First off, there are two versions of the program for Windows. Users can download a 32-bit or 64-bit version, but bear in mind it all depends on the hardware specifications. Now then, after downloading and installing the software, you’ll be shown a clean enough screen after launch.

The window will highlight the drives attached to your computer. Click on the preferred drive and the software will deliver information on the drive’s information, it’s basic health, along with the name of the manufacturer. At the bottom, there are options to enable  SMART and Auto Offline Data Collection.

Right-click for more options

If we right-click on a preferred drive, we’ll see the ability to view details, re-read data, perform tests, enable smart, and auto offline data collection. We recommend clicking on Perform Tests to see a host of options.

In this section, the user will be able to read test log data, error log, a temperature log, and general information about the drive.

There’s also the Advanced tab, and it shows quite a lot of information, many of which are out of our understanding. This section is for folks with a broad understanding of SMART and the inner workings of the hard drive.

Other general options

To get to the Preferences, click on the Options tab then Preferences. Here the user will have the ability to allow GSmartControl to check drive life on start-up, show SMART drives only, or show device name under the Drive icon. Furthermore, if you have smartmontools installed, these can be taken advantage of as well.

Overall, we like what GSmartControl has to offer. It’s not too complicated, though not incredibly easy to use either. Additionally, it’s a free program that performs quickly, which is not surprising by any means. Download the software from sourceforge.net.

Related posts

• 如何使用Windows 10交换硬盘驱动器，Hot Swap

• Benchmark，Monitor Hard Disks，USB - CrystalDiskMark，CrystalDiskInfo

• HD Tune，硬disk performance，基准测试，information software

• 免费软件到Monitor & Check Hard Disk Health，用于潜在失败

• Macrorit Disk Scanner：Bad Sectors & Errors扫描Hard Disk

• Create Bzzt的网络友好图像！ Windows PC Image Editor

• 与Windows PC使用Send Anywhere的任何人共享文件

• HardLink Shell Extension：Create Hardlinks，Symbolic Links，Junctions

• HDD Expert是一种免费软件，用于检查PC上的Hard Drive Health

• 使用NewFileTime更改文件上创建的时间戳的日期

• 字典.NET是Windows PC的桌面Translator application

• 擦除您的数据，因此没有人可以用OW Shredder恢复它

• Reopen最近关闭的文件夹，文件，程序，窗口

• GIGABYTE LAN Optimizer提供智能network management

• 如何测量Windows 11/10中的Reaction Time

• 编辑，Add，New Context Menu中的Remove在Windows 10

• Watch数字电视，并在Windows 10上收听Radio，ProgDVB

• Ashampoo WinOptimizer是优化Windows 10的免费软件

• Invoice Expert：免费Invoice，Inventory and Billing software为Windows

• Best免费Molecular Modeling software的Windows 10