如果当您尝试在Windows 11/10Snip and Sketch工具无法工作或冻结，那么这篇文章可能会对您有所帮助。由于Microsoft计划停用Snipping Tool，因此推出了Snip and Sketch应用程序作为替代方案。该工具提供了几乎相同的一组功能，并且还已知会导致计算机死机。微软^(Microsoft)技术社区的一位用户报告了下图。使用Snip and Sketch Tool进行选择后，它并没有消失并且使显示非交互式。除了移动鼠标，您将无法进行任何操作。

截图^(Snip)和草图^(Sketch)不工作或冻结

以下是您可以尝试解决此问题的建议列表。

1. 运行系统文件检查器
2. 运行系统维护^{(Run System Maintenance)}疑难解答
3. 使用 Al + Tab 关闭截图工具
4. 重置 Snip 和 Sktech 应用程序。

您可能需要管理员权限才能执行其中一些。

1]运行系统文件检查器

Win + R打开运行^(Run)提示，然后在键入CMD后按 shift+ enter 。以管理员权限打开命令提示符后，在命令行中键入sfc /scannow ，然后按Enter键。

扫描完成后，通过在命令提示符下键入snippingtool .exe 重新启动该工具。^{(snippingtool)}然后尝试截屏，看看问题是否仍然存在。

阅读^(Read)： 打印屏幕冻结 Windows 10 计算机^{(Print Screen freezes Windows 10 computer)}。

2]运行系统维护^{(Run System Maintenance)}疑难解答

使用下面提到的命令在提升的命令提示符上运行^{(Command Prompt)}系统维护^{(System Maintenance)}疑难解答。

%systemroot%\system32\msdt.exe -id MaintenanceDiagnostic

它将启动您应该选择以管理员权限运行的工具。

工具完成工作后，检查问题是否再次出现。

3]使用Al + Tab关闭 Snip^{(Close Snip)} and Sketch应用工具^(Tool)

有时，Windows中的^(Windows)Snip and Sketch应用程序会在截屏过程中停止工作。该应用程序不会自行关闭并提供屏幕截图，而是屏幕保持暗淡。在这种情况下，请按照步骤关闭应用程序。

• Use Alt+Tab，它会列出所有打开的程序。
• 在Snip^(Snip) and Sketch旁边，出现了一个小 X。
• 将鼠标悬停^(Hover)在应用程序缩略图上，然后单击以关闭。

您可以尝试使用Alt + Ctrl + Del任务管理器^{(Task Manager)}，找到Snip and Sketch应用程序列表，然后关闭程序。但是，它可能不会一直有效，因为Snip and Sketch应用程序仍然保持在顶部。

4]重置Snip和Sktech App

Snip and Sketch是一个Windows应用程序，您可以从应用程序列表中重置它。

• 转到设置^(Settings)( Win + I) >Apps > Apps和Features > Snip和草图^(Sketch)
• 点击高级选项
• 然后点击重置^{(click on Reset)}

如果这不能解决问题，那么您可以从应用程序部分重新安装该应用程序。您可以随时重新安装它或使用其他截屏工具。^{(use another screenshot-taking tool.)}

阅读^(Read)：截图工具被锁定、冻结或崩溃^{(Snipping Tool locked, freezes, or crashing)}。

我希望这篇文章很容易理解，并且您能够解决由Windows 10中的^{(Windows 10)}Snip和Sketch应用程序引起的冻结问题。

Snip and Sketch not working or freezes in Windows 11/10

If the Snip and Sketch tool is nоt working or freezes when you try to take a screenshot in Windоws 11/10, thеn this post may be able to help you. As Microsoft plans to retire the Snipping Tool, the Snip and Sketch app was rolled out as an alternative. The tool offers almost the same set of features and is also known to cause the computer to freeze.  A user in the Microsoft tech community reported the image below. After the selection was made using the Snip and Sketch Tool, it did not go away and made the display non-interactive. You will not be able to do anything except move your mouse.

Snip and Sketch not working or freezes

Here is the list of suggestions you can try to fix this problem.

1. Run System File Checker
2. Run System Maintenance troubleshooter
3. Close Snipping Tool using Al + Tab
4. Reset Snip and Sktech App.

You may need admin permission to execute some of them.

1] Run System File Checker

Open Run prompt using Win + R and then press shift+ enter after typing CMD. Once the command prompt opens with admin privileges, type sfc /scannow in the command line, press the Enter key.

Once the scan is completed, relaunch the tool by typing snippingtool.exe on the command prompt. Then try taking a screenshot, and see if the issue persists.

Read: Print Screen freezes Windows 10 computer.

2] Run System Maintenance troubleshooter

Use the below-mentioned command to run the System Maintenance troubleshooter on an elevated Command Prompt.

%systemroot%\system32\msdt.exe -id MaintenanceDiagnostic

It will launch the tool which you should choose to run with administrator privileges.

Once the tool finished its job, check if the problem reappears.

3] Close Snip and Sketch app Tool using Al + Tab

At times, the Snip and Sketch app in Windows stops working in the middle of taking a screenshot. The app doesn’t close itself and offers a screenshot, but instead, the screen stays dimmed.  In this case, follow the steps to close the app.

• Use Alt+Tab still, and it will list all the open programs.
• Next to the Snip and Sketch, there is a small X that appears.
• Hover an application thumbnail with the mouse and click to close.

You can try to open the Task Manager using Alt + Ctrl + Del, locate the Snip and Sketch app listing, and close the program. However, it may not work all the time as the Snip and Sketch app still stays on the top.

4] Reset Snip and Sktech App

Snip and Sketch is a Windows app, and you can reset it from the app listing.

• Go to Settings (Win + I) > Apps > Apps and Features > Snip & Sketch
• Click on Advanced Options
• Then click on Reset

And if that doesn’t fix it, then you can reinstall the app from the apps section. You can always reinstall it or use another screenshot-taking tool.

Read: Snipping Tool locked, freezes, or crashing.

I hope the post was easy to follow, and you were able to resolve the freezing issue caused by Snip and Sketch app in Windows 10.

Related posts

• 如何在Windows 11/10中禁用或卸载Snip and Sketch

• 在Windows 10中使用DISM时，远程procedure call失败了错误

• Background Intelligent Transfer Service不在Windows 11/10工作

• Fix Device encryption在Windows 11/10中暂时暂停错误

• 如何在Windows 10中打开和读取Small Memory Dump（DMP）文件

• Brave浏览器不打开或Windows 11/10工作

• Windows Security中glance page的安全性在Windows 10中是空白的

• 如何修复Unidentified Network在Windows 11/10

• LogonUI.exe Application error在Windows 11/10中启动

• Device Manager是空白和不显示任何Windows 11/10

• 缺少操作System在Windows 11/10中没有Found error

• WMI Provider Host（WmiPrvSE.exe）High CPU Usage在Windows 10

• 您的PC不支持Miracast - Windows 10错误

• Intel Thunderbolt Dock software不适用于Windows 10

• 在Windows 10​​6计算机上检测到扫描仪错误

• Run作为administrator option未显示或在Windows 11/10中工作

• 剪下工具锁定，冻结或在Windows 10中崩溃

• 您的组织已关闭Windows 10中的自动更新

• HDMI Audio device未显示在Windows 10中

• 如何解决在Windows 10 WiFi问题