如果您的 Windows 11/10 计算机在升级、 Windows 更新(Windows Update)或重置(Reset)或蓝屏(Blue Screen)后陷入连续无休止的重启循环问题,那么这篇文章将为您提供有关如何处理该问题的一些想法。在您的计算机重新启动之前,它可能会或可能不会显示任何消息;如果是这样,它可能类似于以下内容:
因此,如果您的Windows 计算机在没有警告的情况下重新启动(Windows computer restarts without warning)并进入重新启动循环,您可以尝试以下几件事。请先(Please)浏览整个帖子以及提到的链接,看看哪种情况可能适用于您。
Windows 11/10 陷入无限重启循环
无论是什么原因,您的首要任务应该是尝试进入安全模式(Safe Mode)。如果您可以进入安全模式(Mode),那就太好了;否则,您将不得不使用Windows 安装介质(Windows Installation Media)。
首先(First),让它重新启动几次,看看它是否能自行解决。有时,Windows可能会自动显示修复 Windows(Repair Windows)选项或自动启动自动修复(Automatic Repair)。但如果它继续重新启动,请尝试这些建议。
1]安装更新(Update),驱动程序(Driver)或程序后不断(Program)重启(Rebooting)
如果您使用的是双引导系统(dual-boot system),事情就有点简单了。在您选择要启动的操作系统的双启动操作系统选择屏幕中,您将看到更改默认值或选择其他选项(Change defaults or choose other options)。
选择它,然后Troubleshoot > Advanced选项 > Windows 启动设置(Windows Startup Settings)。
当启动设置(Startup Settings)打开时,按键盘上的 4 选择启用安全模式(Enable Safe Mode)选项。
这会将您的 PC 重新启动到安全模式(Mode)。
如果您的计算机上只安装了一个操作系统(single operating system),那么您需要找到一种以boot Windows 11/10 in Safe Mode的方法。选项包括:
- 按 Shift(Press Shift)并单击重新启动(Restart) 以引导您进入高级(Advanced)启动选项屏幕
- 打开Settings > Update和Security > Recovery > Advanced启动> Restart立即重启。
- 在提升的CMD提示符下键入shutdown /r /o以将计算机重新启动到高级启动(Advanced Boot)选项或故障恢复(Recovery)控制台。
如果您之前已经启用了 F8 键,那么在启动时按 F8 进入Safe Mode会更容易。
如果您无法进入安全模式(cannot enter Safe Mode),那么您可能必须使用 Windows 安装媒体或恢复驱动器启动到Windows 11/10,然后(Windows Installation Media)选择修复(Recovery Drive)Windows 11/10的计算机(Repair your computer)(Repair your computer)以进入疑难解答 >高级启动选项(Advanced Startup Options)>命令提示符(Command Prompt)。您现在可以使用CMD运行命令。您可以使用Windows 11/10DVD或可启动USB驱动器,或者您可以使用另一台计算机burn Windows 11/10 ISO to a USB drive
好吧,无论哪种情况,一旦您退出重启循环并进入安全模式(entered Safe Mode)或访问高级选项(accessed the Advanced Options),您就有以下选项:
如果您进入安全模式(Safe Mode),您可以:
- 打开Control Panel > Programs和Features > View已安装的更新。在这里,您可以在问题开始之前卸载您最近安装的有问题的更新(包括功能升级)。如果您安装了任何程序,您也可以将其卸载。
- 如果您最近更新了设备驱动程序并且现在发现您的 Windows 不断重新启动,您可能想要解决您的驱动程序问题或考虑将您的驱动程序回滚到早期版本。
如果您已进入安全模式(Safe Mode)或访问高级启动选项,则可以使用以下选项(Advanced Startup options):
- (Run Command Prompt)以管理员身份运行命令提示符。在计算机屏幕上出现的CMD框中,输入以下文本字符串,一次一个,然后按 Enter(Enter)。
净停止 wuauserv
净停止位
现在浏览到C:\Windows\SoftwareDistribution文件夹( folder)并删除其中的所有文件和文件夹。
重启你的电脑。它应该能够启动到桌面。
- Windows 10/8 用户可以执行自动启动修复(Automatic Startup Repair)。Windows 7用户可能要考虑修复Windows 7。
- 使用系统还原将您的计算机还原到之前的良好状态。
- (Repair MBR)使用 CMD 提示符和bootrec修复 MBR。
- 重新安装 Windows。
如果您愿意,您还可以使用组策略(Group Policy)或注册表编辑器(Registry Editor)防止 Windows 在 Windows 更新后重新启动。
2 ]因硬件(Hardware)故障持续重启(] Continuous)
硬件(Hardware)故障或系统不稳定会导致计算机不断重启。问题可能是RAM、硬盘驱动器(Hard Drive)、电源(Power Supply)、显卡(Graphics Card)或外部设备: – 也可能是过热或BIOS问题。如果您的计算机由于硬件问题而死机或重新启动,这篇文章将为您提供帮助。您必须处于安全模式(Mode)才能进行更改。
提示(TIP):这篇文章将向您展示 当 PC 无法启动时使用高级启动选项重置 Windows 11。
3]蓝屏(Blue Screen)或停止错误(Stop Error)后重新启动(Reboot)
为防止软件或驱动程序问题在停止错误(Stop Error)后重复重新启动计算机,请执行以下操作。您需要这样做,以便您可以阅读错误代码,这反过来可以帮助您解决问题。您必须处于安全模式(Mode)才能进行更改。
使用Windows 11/10WinX 菜单(WinX Menu),打开System。接下来(Next)单击高级(Advanced)系统设置> Advanced选项卡> Startup和Recovery > Settings。取消选中自动重启(Automatically restart)框。单击应用/确定并退出。
或者,打开注册表编辑器(Registry Editor)并导航到以下键:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\ControlCrashControl
在这里创建或编辑一个名为AutoReboot的 DWORD ,并将其值设置为0。
现在,如果您的 Windows 因停止错误(Stop Error)而崩溃,它不会重新启动计算机,而是会显示错误消息,这可以帮助您解决蓝屏问题(troubleshoot the Blue Screen)。
4]升级后重启循环
如果Windows 升级失败并进入重启循环,这篇文章将为您提供帮助。
恶意软件或病毒感染也可能导致您的计算机重新启动。使用您的防病毒软件(antivirus software)深度扫描您的计算机。您可能还想使用第二意见的按需防病毒软件(second-opinion on-demand antivirus software)来扫描您的 Windows,只是为了加倍确定。(Malware or virus infection could also be a possible cause for your computer restarts. Deep scan your computer with your antivirus software. You may want to also use a second-opinion on-demand antivirus software to scan your Windows, just to be doubly sure.)
有用的阅读:这篇文章向您展示了(Useful read)当 Windows 卡在加载某些屏幕时(access Safe Mode or Advanced Startup Options when Windows is stuck on loading some screen)如何访问安全模式或高级启动选项,旋转点动画无休止地移动,欢迎模式,登录屏幕,启动Windows或无法启动。
祝一切顺利!
Windows 11/10 stuck in endless reboot loop
If your Windows 11/10 computer is stuck in a continuous endless reboot loop problem aftеr an Upgrade, a Windows Update or Reѕet or a Blue Screen, then this post gives you some ideas on how to dеal wіth the problem. Before your computer restart, it may or may not display any message; and if it does, it could be any like the following onеs:
So if your Windows computer restarts without warning and goes into a reboot loop here are a few things you could try. Please go through the entire posts first, along with the mentioned links, and see which situation may apply to you.
Windows 11/10 stuck in endless reboot loop
Whatever may be the reason, your priority should be to try and enter Safe Mode. If you can get into Safe Mode, great; else, you will have to use your Windows Installation Media.
First of all, let it reboot a couple of times and see if it sorts itself out. At times, Windows may automatically display the Repair Windows option or start Automatic Repair automatically. But if it continues to reboot, try these suggestions.
1] Rebooting continuously after installing Update, Driver or Program
If you are on a dual-boot system, things are a bit easy. In the dual-boot OS selection screen where you select the OS to boot into, you will see a Change defaults or choose other options.
Select it, then Troubleshoot > Advanced options > Windows Startup Settings.
When Startup Settings open, press 4 on your keyboard to select the Enable Safe Mode option.
This will reboot your PC into Safe Mode.
If you have only a single operating system installed on your computer, then you need to find a way to boot Windows 11/10 in Safe Mode. The options include:
- Press Shift and click Restart to boot you into the Advanced startup options screen
- Open Settings > Update & Security > Recovery > Advanced startup > Restart now.
- Type shutdown /r /o in an elevated CMD prompt to reboot your computer into Advanced Boot options or Recovery console.
If you had already enabled the F8 key earlier, things are easier as you press F8 while booting, to enter Safe Mode.
If you cannot enter Safe Mode, then you may then have to boot into Windows 11/10 with your Windows Installation Media or Recovery Drive and select Repair your computer to enter Troubleshoot > Advanced Startup Options > Command Prompt. You can now use CMD to run commands. You may use a Windows 11/10 DVD or a bootable USB drive, or you can burn Windows 11/10 ISO to a USB drive using another computer.
Well, in either case, once you have got out of the reboot loop and entered Safe Mode or accessed the Advanced Options, you have the following options:
If you entered Safe Mode you may:
- Open Control Panel > Programs and Features > View installed updates. Here you may uninstall the offending update (including the feature upgrade) which you may have installed recently, just before your problem started. If you installed any program, you may uninstall it too.
- If you recently updated your device drivers and now find that your Windows restarts continuously, you might want to troubleshoot your Driver problems or consider rolling back your driver to the earlier version.
The following options are available to you if you have entered Safe Mode or accessed Advanced Startup options:
- Run Command Prompt as administrator. In the CMD box that appears on the computer screen, enter the following strings of text, one at a time, and hit Enter.
net stop wuauserv
net stop bits
Now browse to the C:\Windows\SoftwareDistribution folder and delete all the files and folders inside.
Restart your computer. It should be able to boot to Desktop.
- Windows 10/8 users may perform an Automatic Startup Repair. Windows 7 users may want to consider repairing Windows 7.
- Use System Restore to restore your computer back to a prior good point.
- Repair MBR using the CMD prompt and bootrec.
- Reinstall Windows.
If you wish, you can also prevent Windows from restarting after Windows Updates by using the Group Policy or Registry Editor.
2] Continuous restart due to Hardware failure
Hardware failure or system instability can cause the computer to reboot continuously. The problem could be the RAM, Hard Drive, Power Supply, Graphics Card or External devices: – or it could be an overheating or BIOS issue. This post will help you if your computer freezes or reboots due to Hardware issues. You will have to be in Safe Mode to be able to make changes.
TIP: This post will show you Reset Windows 11 using Advanced Startup Options when PC won’t boot.
3] Reboot after Blue Screen or Stop Error
To prevent a software or driver issue from restarting your computer repeatedly after a Stop Error, do the following. You need to do this so that you can read the error code, which in turn can help you troubleshoot the issue. You will have to be in Safe Mode to be able to make changes.
Using the WinX Menu of Windows 11/10, open System. Next click on Advanced system settings > Advanced tab > Startup and Recovery > Settings. Uncheck the Automatically restart box. Click Apply / OK and Exit.
Alternatively, open Registry Editor and navigate to the following key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\ControlCrashControl
Here create or edit a DWORD named AutoReboot, and set its value as 0.
Now if your Windows were to crash due to a Stop Error, it will not restart the computer but will display the error message, which can help you troubleshoot the Blue Screen.
4] Reboot loop after an Upgrade
This post will help you if Windows Upgrade fails and goes into a restart loop.
Malware or virus infection could also be a possible cause for your computer restarts. Deep scan your computer with your antivirus software. You may want to also use a second-opinion on-demand antivirus software to scan your Windows, just to be doubly sure.
Useful read: This post shows you how to access Safe Mode or Advanced Startup Options when Windows is stuck on loading some screen with the spinning dots animation moving endlessly, welcome mode, login screen, starting Windows or will not boot.
All the best!