修复无法在 Windows 10 上创建家庭组: (Fix Cannot Create HomeGroup On Windows 10: )当两个或更多人正在处理某个项目并且他们彼此相距非常小的距离时,但如果他们想彼此共享一些东西,那么他们应该怎么做?Windows 是否(Does Windows)提供了任何方法,以便在同一个房子中使用多台 PC,您可以安全地彼此共享一些数据或内容,或者您每次想要这样做时只需将数据单独发送给每个用户?
因此,上述问题的答案是YES。Windows提供了一种方法,您可以使用该方法安全地与彼此相距很近或可能在同一屋子里的人共享数据和内容。它在Windows中的完成方式是借助HomeGroup ,您需要使用要与之共享数据的所有 PC设置 HomeGroup 。
家庭组:(HomeGroup: )家庭组(HomeGroup)是一种网络共享功能,可让您通过同一本地网络在 PC 上轻松共享文件。它最适合家庭网络共享在Windows 10、Windows 8.1 和 Windows 7 上运行的文件和资源。您还可以使用它来配置其他媒体流设备,例如从您的计算机连接到同一本地网络中的其他设备。
在设置Windows HomeGroup时,您应该记住以下几点:
1.关闭连接到同一本地网络的所有其他计算机,只保持您正在设置家庭组(HomeGroup)的计算机打开,以确保一切都将正确配置。
2.在设置家庭组(HomeGroup)之前,请确保您的所有连接设备都在Internet Protocol Version 6 (TCP/IPv6).
确保满足以上两个条件后,您就可以开始设置HomeGroup了。 如果您按照分步指南进行设置,家庭组非常容易。(HomeGroup)但在Windows 10中,设置HomeGroup可能会导致以下错误消息之一:
- 无法(HomeGroup)在此计算机上创建家庭组(Computer)
- 家庭组 Windows10 不工作
- 家庭组(HomeGroup)无法访问其他计算机
- 无法连接到家庭组 Windows10(HomeGroup Windows10)
以上(Above)是设置HomeGroup时普遍面临的几个问题。因此,不要浪费任何时间,让我们看看如何 在下面列出的指南的帮助下修复(Fix)无法在Windows 10上创建(Windows 10)家庭组。(HomeGroup)
修复无法在Windows 10上创建(Windows 10)家庭组(HomeGroup)
确保 创建一个还原点(create a restore point) 以防万一出现问题。
方法 1 – 从 PeerNetworking 文件夹中删除文件(Method 1 – Delete Files From PeerNetworking Folder)
PeerNetworking 是 C: 驱动器内的一个文件夹,其中存在一些垃圾文件并占用硬盘空间,这也会阻碍您设置新的 HomeGroup(set up new HomeGroup)。因此,删除此类文件可能会解决问题。
1.通过下面给出的路径浏览到 PeerNetworking 文件夹:(Browse to the PeerNetworking folder)
C:\Windows\ServiceProfiles\Localservice\AppData\Roaming\PeerNetworking
2.打开 PeerNetworking文件夹(Folder)并删除文件名idstore.sst。右键单击文件并选择删除。(Delete.)
3.转到网络设置(Network Settings)并单击家庭组。(HomeGroup.)
4.在家庭组内点击离开家庭组。(Leave the HomeGroup.)
5.对连接到本地网络并共享同一个家庭组(computers connected in your local network and sharing the same HomeGroup.)的计算机重复上述所有步骤。
6.离开家庭组后关闭所有电脑(HomeGroup)。
7.只需让一台计算机(Computer)开机并在其上创建 家庭组(HomeGroup)。
8.打开所有其他计算机,上面创建的家庭组(HomeGroup)现在将在所有其他计算机中被识别。
9.再次加入家庭组(HomeGroup),这将解决无法在 Windows 10 上创建家庭组的问题。(fix Cannot Create HomeGroup On Windows 10 issue.)
9.如果问题仍然存在,请访问与您在步骤 1 中访问过的相同的PeerNetworking文件夹。现在不要删除任何文件,而是删除PeerNetworking文件夹中所有可用的文件和文件夹,然后再次重复所有步骤。
方法 2 – 启用对等网络分组服务( Method 2 – Enable Peer Networking Grouping Services)
有时,您创建家庭组(HomeGroup)或加入家庭(HomeGroup)组所需的服务可能在默认情况下被禁用。因此,为了使用HomeGroup,您需要启用它们。
1.按Windows Key + R然后键入 services.msc 并按Enter。
2.单击“确定(OK)”或按“输入”(Enter)按钮,将出现下面的对话框。
3.现在确保以下服务配置如下:
Service name |
Start type |
Log On As |
Function Discovery Provider Host |
Manual |
LOCAL SERVICE |
Function Discovery Resource Publication |
Manual |
LOCAL SERVICE |
HomeGroup Listener |
Manual |
LOCAL SYSTEM |
HomeGroup Provider |
Manual – Triggered |
LOCAL SERVICE |
Network List Service |
Manual |
LOCAL SERVICE |
Peer Name Resolution Protocol |
Manual |
LOCAL SERVICE |
Peer Networking Grouping |
Manual |
LOCAL SERVICE |
Peer Networking Identity Manager |
Manual |
LOCAL SERVICE |
4.为此,请一一双击上述服务,然后从启动类型(Startup type)下拉菜单中选择手动。(Manual.)
5.现在切换到登录选项卡(Log On tab)并在登录为复选标记本地系统帐户下。(Local System account.)
6.单击应用,然后单击确定。
7.右键单击对等名称解析协议服务( Peer Name Resolution Protocol service),然后选择开始。(Start.)
8.上述服务启动后,再次返回查看是否能够修复Windows can't set a HomeGroup on this computer错误。( Fix Windows can’t set up a HomeGroup on this computer error.)
如果您无法启动对等网络分组服务,那么您需要遵循本指南: 疑难解答无法启动对等名称解析协议服务(Troubleshoot Can’t Start Peer Name Resolution Protocol Service)
方法 3 – 运行家庭组疑难解答(Method 3 – Run HomeGroup Troubleshooter)
1.在 Windows 搜索中键入control,然后单击控制面板。( Control Panel.)
2.在控制面板(Control Panel)搜索中键入疑难解答(troubleshoot),然后单击疑难解答。(Troubleshooting.)
3.从左侧面板单击查看全部。(View all.)
4.从列表中单击家庭组(Homegroup),然后按照屏幕上的说明运行疑难解答(Troubleshooter)。
5.重新启动您的 PC 以保存更改。
方法 4 – 允许完全控制 MachineKeys 和 PeerNetworking 文件夹( Method 4 – Allow Full Control To MachineKeys And PeerNetworking Folders)
有时,某些需要HomeGroup才能工作的文件夹没有来自Windows的适当权限。因此,通过为他们提供完全控制权,您可以解决您的问题。
1.按照以下路径浏览到MachineKeys 文件夹:(MachineKeys folder)
C:\ProgramData\Microsoft\Crypto\RSA\MachineKeys
2.右键单击MachineKeys文件夹并选择属性。(Properties.)
3.将出现以下对话框。
4.转到安全选项卡(Security tab)和用户组将出现。
5.从组中选择适当的用户名(在大多数情况下是所有人(Everyone)),然后单击编辑( Edit)按钮。
6.从每个人的权限列表中选中完全控制。(checkmark Full Control.)
7.单击确定(OK)按钮。
8.然后按照下面给出的路径浏览到PeerNetworking 文件夹:(PeerNetworking folder)
C:\Windows\ServiceProfiles\Localservice\AppData\Roaming\PeerNetworking
9.右键单击PeerNetworking文件夹并选择属性。(Properties.)
10.切换到安全(Security)选项卡,您将在那里找到组或用户名。
11.选择系统,然后单击编辑按钮。( Edit button.)
12.检查选项列表是否允许完全控制(Full Control is allowed or not)。如果不允许,请单击“允许(Allow)” ,然后单击“确定”。
13.在您要连接到HomeGroup的所有计算机上执行上述步骤。
方法 5 – 重命名 MachineKeys 目录( Method 5 – Rename MachineKeys Directory)
如果您无法设置HomeGroup,则您的 MachineKeys 文件夹可能有问题。尝试通过更改名称来解决您的问题。
1.按照以下路径浏览到MachineKeys文件夹:(MachineKeys)
C:\ProgramData\Microsoft\Crypto\RSA\MachineKeys
2.右键单击MachineKeys文件夹并选择重命名(Rename)选项。
3.将 MachineKeys的名称更改为 MachineKeysold(MachineKeys to MachineKeysold)或您想提供的任何其他名称。
4.现在创建一个名为MachineKeys的新文件夹并为其提供完全控制权。
注意:(Note:)如果您不知道如何完全控制MachineKeys文件夹,请按照上述方法。
5.对所有连接到本地网络并且您必须与之共享HomeGroup的计算机执行上述步骤。
查看您是否能够修复无法在 Windows 10 上创建家庭组(Fix Cannot Create HomeGroup On Windows 10)的问题,如果不能,则继续下一个方法。
方法 6 – 关闭所有计算机并创建一个新的家庭组( Method 6 – Turn Off All Computers And Create A New HomeGroup)
如果您无法设置家庭(HomeGroup)组,则可能是您的 PC 没有问题,但您网络中连接的其他计算机有问题,因此无法加入家庭组(HomeGroup)。
1.首先,通过访问任务管理器(Task Manager),选择该任务并单击结束任务,停止计算机上以(End Task)Home 和 Peer(Home and Peer) 开头的所有服务( all the services running)。
2.对网络中连接的所有计算机(computers connected in your network.)执行上述步骤。
3.然后按照下面给出的路径浏览到PeerNetworking 文件夹:(PeerNetworking folder)
C:\Windows\ServiceProfiles\Localservice\AppData\Roaming\PeerNetworking
4.打开PeerNetworking文件夹并删除其中所有可用的文件和文件夹,( delete all the files and folders available inside it)并对连接到网络的所有计算机执行此操作。
5.现在完全关闭所有电脑。
6.打开任何一台计算机,并在这台计算机上创建新的家庭组。( create new HomeGroup on this computer.)
7.重新启动网络中的所有其他计算机,并将它们加入( join them with the newly created HomeGroup)您在上述步骤中创建的新创建的家庭组。
受到推崇的:(Recommended:)
我希望这篇文章对您有所帮助,您现在可以轻松地 修复无法在 Windows 10 上创建家庭组( Fix Cannot Create HomeGroup On Windows 10), 但如果您对本教程仍有任何疑问,请随时在评论部分提出。
Fix Cannot Create HomeGroup On Windows 10
Fix Cannot Create HomeGroup On Windows 10: When two or more people are working on some project and they are sitting at a very small distance from each other but what if they want to share something with each other then what should they do? Does Windows provide any way so that using multiple PCs in the same house, you can securely share some data or content with each other or you just have to send data individually to each one user every time you want to do so?
So, the answer to the above question is YES. Windows provides a way using which you can securely share data and content with people who are available at a very small distance from each other or may be in same the house. The way it is done in Windows is with the help of HomeGroup, you need to set up HomeGroup with all the PCs you want to share data with.
HomeGroup: HomeGroup is a network sharing feature that allows you to easily share files across the PC over the same local network. It is best suited for a home network to share files and resources that are running on Windows 10, Windows 8.1, and Windows 7. You can also use it to configure other media streaming devices such as play music, watch movies, etc. from your computer to other devices at the same local network.
While setting up Windows HomeGroup there are few things which you should keep in mind:
1.Shut down all the other computers connecting to the same local network and only keep the computer open on which you are setting up HomeGroup to make sure everything will configure properly.
2.Before setting up HomeGroup male sure all your connecting devices are running on the Internet Protocol Version 6 (TCP/IPv6).
After making sure the above two conditions are fulfilled then you can start setting up HomeGroup. HomeGroup is very easy to set up if you follow the step-by-step guide. But in Windows 10, setting up HomeGroup can lead to one of the following error messages:
- HomeGroup cannot be created on this Computer
- HomeGroup Windows10 not working
- HomeGroup cannot access other computers
- Cannot connect to HomeGroup Windows10
Above are a few problems which are generally faced while setting up HomeGroup. So without wasting any time let’s see how to Fix Cannot Create HomeGroup On Windows 10 with the help of the below-listed guide.
Fix Cannot Create HomeGroup On Windows 10
Make sure to create a restore point just in case something goes wrong.
Method 1 – Delete Files From PeerNetworking Folder
PeerNetworking is a folder present inside the C: drive where some junk files are present and occupy space on your hard disk which also hinder when you want to set up new HomeGroup. So, deleting such files may solve the problem.
1.Browse to the PeerNetworking folder through the path given below:
C:\Windows\ServiceProfiles\Localservice\AppData\Roaming\PeerNetworking
2.Open PeerNetworking Folder and delete the file name idstore.sst. Right-click on the files and select Delete.
3.Go to the Network Settings and Click on HomeGroup.
4.Inside the HomeGroup click on Leave the HomeGroup.
5.Repeat all the above steps for the computers connected in your local network and sharing the same HomeGroup.
6.Shut down all the computers after leaving the HomeGroup.
7.Just leave one Computer powered ON and create HomeGroup on it.
8.Turn on all the other computers and the above create HomeGroup will now be recognized in all other computers.
9.Join the HomeGroup again which will fix Cannot Create HomeGroup On Windows 10 issue.
9.If the problem still persists then visit the same PeerNetworking folder as you have visited at step 1. Now instead of deleting any one file, delete all the files and folders available inside PeerNetworking folder and repeat all the steps again.
Method 2 – Enable Peer Networking Grouping Services
Sometimes, it is possible that the services you need to create HomeGroup or to join HomeGroup are disabled by default. So, in order to work with HomeGroup, you need to enable them.
1.Press Windows Key + R then type services.msc and hit Enter.
2.Click OK or hit the Enter button and below dialog box will appear.
3.Now make sure the following services are configured as follows:
Service name |
Start type |
Log On As |
Function Discovery Provider Host |
Manual |
LOCAL SERVICE |
Function Discovery Resource Publication |
Manual |
LOCAL SERVICE |
HomeGroup Listener |
Manual |
LOCAL SYSTEM |
HomeGroup Provider |
Manual – Triggered |
LOCAL SERVICE |
Network List Service |
Manual |
LOCAL SERVICE |
Peer Name Resolution Protocol |
Manual |
LOCAL SERVICE |
Peer Networking Grouping |
Manual |
LOCAL SERVICE |
Peer Networking Identity Manager |
Manual |
LOCAL SERVICE |
4.To do this, double-click on above services one by one and then from Startup type drop-down select Manual.
5.Now switch to Log On tab and under Log on as checkmark Local System account.
6.Click Apply followed by OK.
7.Right-click on Peer Name Resolution Protocol service and then select Start.
8.Once the above service is started, again go back and see if you’re able to Fix Windows can’t set up a HomeGroup on this computer error.
If you can’t start Peer Networking Grouping Service then you need to follow this guide: Troubleshoot Can’t Start Peer Name Resolution Protocol Service
Method 3 – Run HomeGroup Troubleshooter
1.Type control in Windows Search then click on Control Panel.
2.Type troubleshoot in the Control Panel search and then click on Troubleshooting.
3.From the left-hand panel click on View all.
4.Click Homegroup from the list and follow the on-screen instructions to run the Troubleshooter.
5.Reboot your PC to save changes.
Method 4 – Allow Full Control To MachineKeys And PeerNetworking Folders
Sometimes, some folders which need HomeGroup to work don’t have the appropriate permission from Windows. So, by providing them full control you can solve your problem.
1.Browse to the MachineKeys folder by following the below path:
C:\ProgramData\Microsoft\Crypto\RSA\MachineKeys
2.Right-click on MachineKeys folder and choose Properties.
3.Below dialog box will appear.
4.Go to Security tab and group of users will appear.
5.Select the appropriate username (in most cases it will be Everyone) from the group and then click on Edit button.
6.From the list of permissions for Everyone checkmark Full Control.
7.Click on the OK button.
8.Then browse to the PeerNetworking folder by following the path given below:
C:\Windows\ServiceProfiles\Localservice\AppData\Roaming\PeerNetworking
9.Right-click on PeerNetworking folder and choose Properties.
10.Switch to the Security tab and you will find group or user name there.
11.Select System then click on the Edit button.
12.Check in the list of options if Full Control is allowed or not. If not allowed then click on Allow and then click OK.
13.Perform the above steps in all the computers you want to connect to HomeGroup.
Method 5 – Rename MachineKeys Directory
If you are not able to set HomeGroup then there may be a problem with your MachineKeys folder. Try to solve your problem by changing its name.
1.Browse to the MachineKeys folder by following the below path:
C:\ProgramData\Microsoft\Crypto\RSA\MachineKeys
2.Right-click on the MachineKeys folder and select the Rename option.
3.Change the name of MachineKeys to MachineKeysold or any other name you want to give.
4.Now create a new folder with name MachineKeys and provide it full control.
Note: If you do not know how to give full control to the MachineKeys folder then follow the above method.
5.Perform the above steps for all the computers connected to the local network and with whom you have to share HomeGroup.
See if you’re able to Fix Cannot Create HomeGroup On Windows 10 issue, if not then continue with the next method.
Method 6 – Turn Off All Computers And Create A New HomeGroup
If you are unable to set up HomeGroup, then there may be chances that there is no problem with your PC but the other computers connected in your network have a problem and therefore, they are not able to join the HomeGroup.
1.First of all stop all the services running on your computer starting with the name Home and Peer by visiting the Task Manager, selecting that task and click End Task.
2.Perform the above step for all the computers connected in your network.
3.Then browse to the PeerNetworking folder by following the path given below:
C:\Windows\ServiceProfiles\Localservice\AppData\Roaming\PeerNetworking
4.Open the PeerNetworking folder and delete all the files and folders available inside it and do this for all the computers connected to your network.
5.Now turned off all the computers completely.
6.Turn on any one computer and create new HomeGroup on this computer.
7.Restart all the other computers of your network and join them with the newly created HomeGroup which you have created in the above step.
Recommended:
I hope this article was helpful and you can now easily Fix Cannot Create HomeGroup On Windows 10, but if you still have any questions regarding this tutorial then feel free to ask them in the comment’s section.