在发现Dell Mobile Connect应用程序之前，您的(Dell Mobile Connect)手机(Phone)和戴尔(Dell)笔记本电脑之间的文件传输从未如此简单。该功能长期以来一直是该应用程序的一部分，现在，它又增加了一个新功能 - 屏幕镜像！新应用程序可让您完全从 PC 上查看和控制手机 - 因此，让我们深入了解如何在手机上使用戴尔的Mobile Connect应用程序。该应用程序在iPhone或Android手机上的工作方式相同——然而，在这篇文章中，我们使用了 iPhone。
使用Dell Mobile Connect应用程序将(Dell Mobile Connect)手机(Phone)与 PC配对
Dell Mobile Connect支持无线 PC 和智能手机(Smartphone)之间的集成，因此您可以直接在 PC 上拨打和接听电话、发送短信和接收通知。彩信(MMS)也可以直接发送和接收。因此，在这篇文章中，我们将了解如何使用Dell Mobile Connect 应用程序(Dell Mobile Connect App)发送短信并为 iPhone 启用免提通话。
- 通过蓝牙链接连接
- 启用通知和传入消息
- 免提通话
- 配置其他选项
完成“添加新手机(Add a New Phone)”设置后，手机将与 PC 进行蓝牙配对。这是一个一次性的过程，可以让 PC 和手机做好准备，以实现未来的潜在连接。
1]通过蓝牙链接连接
您可以在 PC 和智能手机(Smartphone)之间安全地拖放照片、视频、音乐和文档，而无需任何云存储或物理电缆。注意 –(Note – File) iOS 上的文件传输仅限于照片和视频。
(Download Dell Mobile Connect)从Microsoft Store下载适用于(Microsoft Store)Windows PC 的Dell Mobile Connect应用程序。同样，从App Store(App Store)下载适用于 iPhone 的应用程序。DMC iPhone 应用程序的唯一目的是启用从Windows 10 PC发送的SMS消息。(SMS)
要将 iPhone 与 PC 配对，请选中添加新手机(Add New Phone)( ANP ) 向导中的 iPhone 框。
然后，转到 iPhone 上的“设置(Settings)”>“蓝牙(Bluetooth)”并确认蓝牙(Bluetooth)已打开。
如果您的 iPhone 在您的 PC 附近或附近，则其蓝牙(Bluetooth)名称应显示在 PC 应用程序屏幕上。单击(Click)“选择(Select)”继续。
批准(Approve)手机应用程序和 PC 应用程序上的配对。之后(Thereafter)，按照屏幕上的说明进行操作。
要从您的 PC 发送短信，您的 iPhone Dell Mobile Connect应用程序必须在前台运行，因此在 iPhone 屏幕上清晰可见。
为此，请切换“解锁(Unlock)”开关，以防止手机被锁定
2]启用通知和传入消息
下载并安装DMC Windows(DMC Windows)应用程序后配置为在 PC 启动时自动运行。如果手机与 PC 配对并在蓝牙(Bluetooth)范围内，DMC将连接两者。
如果您的 iPhone 上有收到的消息，您将在 PC 屏幕上收到弹出通知。您可以在 PC 上查看并使用 PC 键盘回复短信。
或者，您也可以通过单击“消息(Messages)”选项卡来查看消息。
3]免提通话
对于免提(Hands-free)通话，您可以使用“拨号器”(Dialer’ )或选择通过“联系人”( ‘Contacts’ )列表拨打电话。
同样，如果您需要接听来电，请切换到免提模式或采取以下操作之一 - 拒绝来电或发送短信拒绝。
最后，Dell Mobile Connect 将(Dell Mobile Connect)您的 iPhone主屏幕(Home Screen)镜像到 PC 屏幕上。这有助于您使用键盘、鼠标和触控与手机进行交互。
4]配置其他选项
配置上述选项后，如果您想退出DMC，只需进入信息中心(Information Center)，右键单击DMC图标，然后选择“退出(Quit)”选项。该操作在确认后将允许您关闭应用程序。重要的是要在这里提到，通过单击“X”按钮“关闭”应用程序窗口不会让您退出DMC应用程序。它将继续在后台运行。用户只能通过信息(Information)中心退出应用程序。
您还可以防止DMC在 PC 启动时自动运行。要进行此更改，请转到 Windows 应用程序中的“设置(Windows)”(Settings) >“启动(Startup)”，并在每次启动Windows时停止该应用程序的运行。
一些用户报告说，当他们尝试通过Dell Mobile Connect(Dell Mobile Connect)应用程序将iPhone 与 PC 配对时，他们的鼠标无法工作并且无法响应 PC 的发光窗口。在这种情况下，建议取消配对所有设备，等待几分钟然后修复。应该恢复鼠标/光标功能。该问题主要是由于智能手机上的某些安全包引起的。
最后的话(Final words)
尽管Dell Mobile Connect应用程序缺少一些适用于 macOS 笔记本电脑的“连续性(Continuity)”和“无需干涉”功能，但与其他(Hands-off)Windows 10替代品相比，它是一个更好的选择。您可以从Microsoft Store下载它。
相关阅读(Related read)：使用 Your Phone 应用程序将 iPhone 或 Android 手机中的内容镜像到 Windows 10 PC。
How to use Dell Mobile Connect app with an iPhone or Android
Fіle transfers between your Рhоne phone and Dell laptops were never that easier, until the dіscovery of Dell Mobile Connect app. The feature has been a part of the app for long and now, there’s a new addition to it – screen mirroring! The new app lets you view and control your phone entirely from your PC – so, let’s dive in and see how to use Dell’s Mobile Connect app with your phone. The app works the same with an iPhone or Android phone – in this post however, we have made use of an iPhone.
Using Dell Mobile Connect app to pair Phone with PC
Dell Mobile Connect supports integration between a wireless PC and a Smartphone so that you can make and receive calls, send texts and get notifications directly on your PC. MMS messages too, can be sent and received directly. So, in this post, we’ll see how to use the Dell Mobile Connect App for sending text messages and enabling Hands-free calling for an iPhone.
- Connect via Bluetooth link
- Enable notifications and incoming messages
- Hands-free Calling
- Configuring other options
After completing the ‘Add a New Phone‘ setup, the phone will be Bluetooth-paired with the PC. This is a one-time procedure, which readies the PC and the phone to enable potential future connectivity.
1] Connect via Bluetooth link
You can securely drag and drop photos, videos, music, and documents between your PC and Smartphone without any cloud storage or physical cables. Note – File transfer on iOS is limited to photos and videos.
Download Dell Mobile Connect app for Windows PC from Microsoft Store. Similarly, download the app for iPhone from the App Store. The DMC iPhone app is designed with the sole purpose of enabling outgoing SMS messages from a Windows 10 PC.
To pair the iPhone with the PC, check iPhone box on your Add New Phone (ANP) wizard.
Then, go to ‘Settings’ > ‘Bluetooth’ on your iPhone and verify that Bluetooth is turned on.
If your iPhone is nearby or in proximity with your PC, its Bluetooth name should be displayed on the PC app screen. Click ‘Select’ to continue.
Approve pairing on both the phone app and the PC app. Thereafter, follow the onscreen instructions.
For sending text messages from your PC, it is essential that your iPhone Dell Mobile Connect app runs in the foreground, and therefore, clearly visible on the iPhone screen.
For this, toggle the ‘Unlock’ switch which prevents the phone from getting locked
2] Enable notifications and incoming messages
The DMC Windows app once downloaded and installed is configured to automatically run upon PC startup. If the phone is paired to the PC and within Bluetooth range, DMC will connect the two.
If there’s an incoming message delivered on your iPhone, you’ll get a popup notification on your PC screen. You can go and view it on your PC and use the PC keyboard to reply to the text message.
Alternatively, you can also view the message by clicking on the ‘Messages’ tab.
3] Hands-free Calling
For Hands-free calling, you can use the ‘Dialer’ or choose to make calls via ‘Contacts’ list.
Likewise, if there’s an incoming call you need to attend then, either switch to Hands-free mode or take one of the following actions – reject the call or reject with a text.
Lastly, Dell Mobile Connect mirrors your iPhone Home Screen onto the PC screen. This helps you interact with the phone using the keyboard, mouse, and touch.
4] Configuring other options
After configuring the above options, if you would like to quit DMC, simply go to the Information Center, right-click on the DMC icon, and select ‘Quit’ option. The action, when confirmed will allow you to close the application. It is important to mention here that ‘CLOSING’ the app window by clicking the ‘X’ button will not allow you to quit the DMC app. It will continue to run in the background. Users can quit the app via the Information center only.
You can also prevent DMC from auto-running upon PC startup. To make this change, go to ‘Settings’ > ‘Startup’ in the Windows app and stop the app from running every time you launch Windows.
Some users report, their mouse does not work and fails to respond to the beaming window of their PC when they attempt to pair their iPhone with PC via the Dell Mobile Connect app. In such cases, it is recommended to un-pair all devices, wait for few minutes and then repair. The mouse/cursor functionality should be restored. The issue mainly arises on account of certain security packages on Smartphones.
Final words
Although Dell Mobile Connect app lacks some of the ‘Continuity’ and ‘Hands-off’ functionality available for macOS laptops, it’s a better choice compared with other Windows 10 alternatives. You can download it from the Microsoft Store.
Related read: Mirror content from iPhone or Android phone to Windows 10 PC using the Your Phone App.
