我将 Xbox One 无线控制器与Windows 10 PC 和控制台一起用于玩游戏。我经常面临的一个常见问题是 Xbox One 在与 PC 或任何其他控制台连接后无法检测到。这种情况每次都会发生。情况似乎是,当我使用USB线将控制器与 PC 连接时,控制台和控制器之间的配对似乎已损坏。除此之外,Xbox One 在很多情况下都无法检测到控制器,(Xbox One fails to detect the controller,)即使它已配对。在本指南中,我们将学习如何将无线Xbox One 控制器( Xbox One controller)与控制台重新连接。
将无线 Xbox One(Wireless Xbox One)控制器与控制台重新连接
有时Xbox One控制台由于奇怪的原因无法检测到无线控制器。您可能在其他 PC 或控制台上使用过它,但配对似乎已损坏。如果您的Xbox One 控制器无法连接、闪烁但无法正常工作或无法同步或调整,那么这篇文章将展示如何将您的(Controlle)Xbox One控制器重新连接到您的Windows PC。
Xbox One 无法检测到控制器
有两种方法可以做到这一点。首先(First)是使用控制台的连接按钮进行修复,其次是使用USB线。如果您在控制器内部使用电池组而不是 AA 电池,则必须已经有电缆。如果没有,您可以使用任何带有微型USB 2.0端口的USB线。(USB)
使用控制台的连接按钮连接控制器
- 打开您的 Xbox One,控制器中的电池已充满电。
- 按住控制器上的 Xbox 按钮(hold the Xbox Button)。它位于中间,上面有Xbox 徽标(Xbox Logo)。
- 如果按钮上的灯一直闪烁,则表示无法连接控制台。
- 在这种情况下,我们将不得不使用连接按钮。(connect button.)此按钮在Xbox One(Xbox One)和控制器 上均可用。
- 在Xbox One X和Xbox One S上,连接按钮位于右前方( on the front right),电源按钮下方。
- 在最初的Xbox One上,连接按钮位于光盘托盘的一角(on the side, around the corner)。
- 在控制器上,它位于上边缘,就在引导按钮下方( upper edge, just below the guide button)。您应该在它旁边看到箭头。
- 按下并松开 Xbox 上的连接按钮。(connect)
- 立即在Xbox 控制器(Xbox Controller)上执行相同操作,但这会将其握在手中,直到控制器的 Xbox 按钮闪烁几次。(Xbox button flashes a few times.) 正式地,你有 20 秒的时间。
- 建立连接后,Xbox按钮将在控制器上保持亮起。
如果您有多个控制器,请为每个其他控制器重复此操作。此外,如果控制台未能这样做,您可能必须将控制器重新分配给用户。
使用USB 转微型 USB(USB-to-micro-USB)电缆连接控制器
这是最简单的方法,适用于有线和无线控制器。您将需要一根 micro-USB 数据线,最好是Xbox One Play随附的,以及充电套件或任何适用于您手机的产品。
- 将电缆的USB(Connect USB)端连接到Xbox One USB端口之一。
- 将(Insert)连接线的充电端口插入Xbox One控制器。
- 等到(Wait)您看到Xbox One按钮已打开并保持不变。
这是我大部分时间使用的,因为我使用相同的有线电缆将它与我的 PC 连接。您不必按下任何配对按钮,而且它是即时的。但是,您应该知道它将分配给当前Xbox One用户的个人资料。因此,如果您在控制台上有多个用户,请先使用您的帐户登录,然后尝试此操作。在此之后,您可以移除电缆,它会自动重新连接到控制台。
如果这不起作用,您可能需要检查两件事。首先(First)是您的 AA 电池没有没电,其次您确保按时按下连接按钮以防无线控制器。最后,您可能需要重新启动控制台一次以查看一切是否正常。
How to re-connect Wireless Xbox One controller with the console
I υse my Xbox One wireless controller both with Windows 10 PC, and the console for рlayіng games. One of the common problems which I facе many a time is that Xbox One fails tо detect onсe it’s connected with a PC or any other console. This hаppens each and every time. Whаt seems to be the case is when I сonnect my controller with PС using the USB wire, the pairing between the conѕole, and the controller seems to be broken. Apart from this, there arе many scenarios where Xbox One fails to detect the controller, even though its paired. In this guide, we will learn to re-connect wireless Xbox One controller with the console.
Re-connect Wireless Xbox One controller with the console
At time Xbox One console fails to detect the wireless controller for an odd reason. You might have used it on some other PC or a console, and pairing seems to be broken. If your Xbox One Controlle is not connecting, flashing but not working or not syncing or tuning on, then this post shows how to re-connect your Xbox One controller to your Windows PC.
Xbox One fails to detect the controller
There are two ways to do this. First is repairing using the console’s connect button, and the second is using a USB wire. If you are using a battery pack inside the controller instead of AA batteries, you must have a cable already. If not you can use any USB wire with a micro USB 2.0 port.
Connect the controller using the console’s connect button
- Turn on your Xbox One, and you have a battery charge in the controller.
- Press and hold the Xbox Button on the controller. It is located in the middle with Xbox Logo on it.
- If the light on the button keeps blinking, it means its not able to connect the console.
- In this case, we will have to use the connect button. This button is available both on Xbox One, and the controller.
- On Xbox One X and Xbox One S, the connect button is on the front right, below the power button.
- On original Xbox One, the connect button is on the side, around the corner from the disc tray.
- On the controller, it’s on upper edge, just below the guide button. You should see arrows right next to it.
- Press and release the connect button on the Xbox.
- Instantly do the same on the Xbox Controller, but this holds it in your hands until the controller’s Xbox button flashes a few times. Officially you have 20 seconds for this.
- Once the connection is setup, the Xbox button will stay lit on the controller.
If you have multiple controllers, repeat this for every additional controller. Also, you may have to re-assign the controller to the user if the console fails to do so.
Connect the controller using a USB-to-micro-USB cable
It’s the simples method and works with both wired, and wireless controller. You will need a micro-USB cable, preferably which came with Xbox One Play, and charge kit or any which works with your phone.
- Connect USB end of the cable into one of the Xbox One USB port.
- Insert the charging port of the cable into Xbox One controller.
- Wait till you see the Xbox One button turned on and stays like that.
This is what I use most of the time because I use the same wired cable to connect it with my PC. You don’t have to push any pairing button, and its instant. However, you should know that it will get assigned to the profile of the current Xbox One user. So if you have multiple users on the console, sign-in with your account first, and then try this. After this, you can remove the cable, and it will automatically connect to the console again.
In case this is not working, you may want to check on two things. First is that your AA battery are not out of charge, and second you made sure to push the connect button on time in case of a wireless controller. Lastly, you may want to restart your console once to see if everything is working fine.