USB 驱动器^{(USB Drives)}因容易受到病毒和恶意软件的攻击而臭名昭著，因为它不断插入不同的计算机。所以，正因为如此，我们可能需要更频繁地格式化驱动器，但如果你不能这样做呢？在本文中，我们将看到一些可以帮助您的解决方案。

无法格式化 USB 驱动器

如果您无法在 Windows 11/10 计算机上格式化USB 驱动器，可以执行以下操作：^{(USB Drive)}

1. 确保^(Make)USB 驱动器^{(USB Drive)}没有写保护
2. 扫描您的计算机和 USB 以查找病毒
3. 在 USB 上运行 CHKDSK 扫描
4. ^{(Format USB Drive)}使用命令提示符^{(Command Prompt)}格式化 USB 驱动器

让我们详细谈谈它们。

Windows无法完成格式化

1]确保^(Make)驱动器^(Drive)没有写保护

在断定您的USB 驱动器^{(USB Drive)}有问题之前，您需要确保的第一件事是它是否被写保护。要清除 USB 写保护^{(clear the USB write-protection)}，我们将使用命令提示符^{(Command Prompt)}。

以管理员身份启动命令提示符并键入以下命令。^{(Command Prompt)}

DISKPART

list disk

select disk X

注意：将“X”替换为您的USB 驱动器^{(USB Drive)}的编号。您可以通过查看Size来确认数字。

attributes disk clear readonly

现在，您的云端硬盘^(Drive)没有写保护。

尝试格式化它，如果错误是因为这个问题，它将被修复。

2]扫描您的PC和USB以查找病毒

解决此问题的一种方法是扫描您的计算机以查找病毒和恶意软件。您可以使用任何免费的防病毒软件或Microsoft Defender。在本节中，我们将使用Microsoft Defender。

要扫描您的计算机以查找恶意文件，请通过Win + X > Settings设置^(Settings)，然后单击Update & Security > Windows Security > Open Windows Security > Virus & threat protection > Scan options > Windows Defender Offline scan > Scan now。

让Windows Defender扫描您的系统并消除所有病毒和恶意软件。

3]在USB上运行CHKDSK扫描

在CHKDSK 命令^{(CHKDSK command)}的帮助下，我们将修复损坏的USB驱动器。这将修复驱动器的所有坏扇区。

为此，请以管理员身份启动命令提示符，键入以下命令，然后^{(Command Prompt)}按 Enter^(Enter)。

chkdsk g: /f /r /x

注意：将“^{(Replace “)} g”替换为您的 USB驱动器号^(Drive)。

如果问题是由于驱动器损坏，它将被修复。

4]使用命令行格式化驱动器

如果您无法从文件资源管理器格式化您的^{(File Explorer)}USB驱动器，请尝试使用命令提示符执行相同操作。

为此，请以管理员身份启动命令提示符，键入以下命令并按^{(Command Prompt)}Enter。

DISKPART

list disk

select disk X

注意：将“X”替换为您的USB 驱动器^{(USB Drive)}的编号。您可以通过查看Size来确认数字。

clean

create partition primary

format fs=ntfs quick

注意：如果您选择了 fat32，请将 ntf 替换为 fat32。

希望这可以帮助您修复“无法在Windows 10中格式化^{(Windows 10)}USB 驱动器^{(USB Drive)}”错误。

阅读下一篇： ^{(Read Next: )}设备当前正在使用 – USB 错误。

Can't format USB Drive in Windows 11/10

USB Drives are notorious for being vulnerable to viruses and malware as it is constantly plugged into different computers. So, because of this, we may need to format the drive more often than not, but what if you are not able to do that? In this article, we are going to see some of the solutions that could help you.

Can’t format USB Drive

These are some of the things you can do if you can’t format the USB Drive on your Windows 11/10 computer:

1. Make sure the is USB Drive is not Write-Protected
2. Scan your Computer & USB for Virus
3. Run CHKDSK scan on the USB
4. Format USB Drive using Command Prompt

Let us talk about them in detail.

Windows was unable to complete the format

1] Make sure the Drive is not Write-Protected

The first thing you need to make sure, before concluding that something is wrong with your USB Drive, is if it’s write-protected. To clear the USB write-protection, we are going to use the Command Prompt.

Launch Command Prompt as an administrator and type the following commands.

DISKPART

list disk

select disk X

Note: Replace “X” with the number of your USB Drive. You can confirm the number by looking at the Size.

attributes disk clear readonly

Now, your Drive is not write-protected.

Try formatting it, if the error is because of this issue, it will be fixed.

2] Scan your PC & USB for Virus

One way to fix the issue is by scanning your computer for viruses and malware. You can use any free antivirus or Microsoft Defender. In this section, we are going to use Microsoft Defender.

To scan your computer for malicious files, launch Settings by Win + X > Settings and click Update & Security > Windows Security > Open Windows Security > Virus & threat protection > Scan options > Windows Defender Offline scan > Scan now.

Let the Windows Defender scan your system and eliminate all the viruses and malware.

3] Run CHKDSK scan on USB

With the help of the CHKDSK command, we are going to fix the corrupted USB drive. This will fix all the bad sectors of your drive.

To do that, launch Command Prompt as an administrator, type the following command, and hit Enter.

chkdsk g: /f /r /x

Note: Replace “g” with your USB’s Drive letter.

If the issue is because of a corrupted drive, it will be fixed.

4] Format Drive using Command-line

If you can not format your USB Drive from File Explorer, try doing the same with the Command Prompt.

To do that, launch Command Prompt as an administrator, type the following commands and hit Enter.

DISKPART

list disk

select disk X

Note: Replace “X” with the number of your USB Drive. You can confirm the number by looking at the Size.

clean

create partition primary

format fs=ntfs quick

Note: If you have chosen fat32, replace ntf with fat32.

Hopefully, this has helped you in fixing the “not able to format USB Drive in Windows 10” error.

Read Next: The device is currently in use – USB error.

Related posts

• 外部Hard Drive在Windows 11/10中没有出现或检测到

• 在Windows 11/10上无法弹出External Hard drive Drive or USB

• 如何在Windows 11/10中Format Write-protected USB Pen Drive

• USB Disk Ejector让您在Windows 10中快速删除USB设备

• VSUsbLogon允许您使用USB Drive安全地登录到Windows

• USB Keyboard在Windows 10中无法识别

• 如何将WebDAV映射为Windows 11/10的Network Drive

• 如何在 Windows 11/10 中检查硬盘健康状况

• 最佳硬Drive encryption软件Windows 10

• 如何在Windows 10中复制或Clone Bootable USB Drive

• 自动添加，用Desktop Media删除USB drive的快捷方式

• USB Flash Drives Control允许您控制如何使用USB驱动器

• USB Image Tool：Create USB Disk Backup & Image为Windows 10

• Windows无法在Windows 10修理驱动器

• 如何在地图上Network Drive或Windows 11/10添加FTP Drive

• 如何使用Recovery Drive恢复Windows 11/10

• 如何在Windows 11/10上克隆Hard Drive

• 如何在Windows 10 Compiuter中修复未检测到的VirtualBox USB

• USB Flash Drive在Windows 10中显示0字节

• 如何在Windows 10到Backup Gmail至Hard Drive