在这篇文章中，我们将列出在Windows 11/10蓝牙音频^{(Bluetooth audio stuttering)}卡顿的可能解决方案。音频^(Audio)口吃也称为声音失真^{(Sound distortion)}。导致此错误的原因有多种，例如驱动程序损坏或过时、频率问题等。一些用户报告说，当他们关闭WiFi连接时，该问题已得到解决。这通常发生在蓝牙使用与^(Bluetooth)WiFi信号相同的频率时。

^{(Fix Bluetooth)}Windows 11/10蓝牙音频卡顿

如果您在将蓝牙^(Bluetooth)音频设备与Windows 11/10蓝牙^(Bluetooth)音频卡顿问题，您可以尝试以下解决方案来解决问题。

1. 运行蓝牙疑难解答。
2. 在 WiFi 频段之间切换。
3. 禁用并重新启用音频增强^{(Audio Enhancements)}。
4. 重新安装蓝牙^(Bluetooth)和WiFi驱动程序。
5. ^{(Set Roaming Aggressiveness)}在无线网络^{(Wireless Network)}适配器属性中将Roaming Aggressiveness 设置为最低^(Lowest)值。
6. 禁用蓝牙^(Bluetooth)设备的远程控制^{(Remote Control)}属性。
7. 在Broadcom 网络适配器^{(Broadcom Network Adapter)}属性中禁用蓝牙协作。^{(Bluetooth Collaboration)}
8. 使用 USB 电缆。
9. 关闭其他设备的蓝牙或取消配对。^(Bluetooth)
10. 重新启动蓝牙支持服务。

让我们详细讨论所有这些解决方案。

1]运行蓝牙疑难解答

由于此问题与蓝牙^(Bluetooth)有关，因此运行蓝牙疑难解答^{(Bluetooth Troubleshooter)}可能会解决此问题。要运行疑难解答，您必须按照以下步骤操作：

1. 右键单击^{(Right-click)}“开始^(Start)”按钮并选择“设置”^(Settings)以打开“设置”应用。
2. 单击更新和安全^{(Update & Security)}。
3. 从左侧选择疑难解答。^{(Troubleshoot)}
4. 现在，从右窗格中选择其他疑难解答。^{(Additional troubleshooters)}
5. 向下滚动^(Scroll)并选择蓝牙^(Bluetooth)。之后，单击运行疑难解答^{(Run the troubleshooter)}按钮。

故障排除完成后，查看问题是否仍然存在。

2]在WiFi频段之间切换

Windows 11/10蓝牙^(Bluetooth)音频卡顿问题的主要原因之一是干扰问题。当两个无线设备使用相同的频率时，通常会出现干扰问题。在您的情况下，您的蓝牙^(Bluetooth)设备和WiFi路由器的频率可能相同。要检查它，您可以关闭WiFi路由器，看看它是否有帮助。如果正常，则表示您遇到此问题是由于蓝牙^(Bluetooth)和WiFi信号干扰。这可以通过更改 WiFi 路由器的频率^{(changing the frequency of your WiFi router)}来解决。

3]禁用^(Disable)并重新启用音频^(Audio)增强

Windows 10 附带音频增强功能，可用于提高特定音频硬件的音质。有时，此功能会导致音频设备出现一些问题。如果以上两种解决方案都没有帮助您解决问题，您可以尝试这个技巧；禁用系统上的音频增强，然后重新启用它们。

4]重新安装蓝牙^(Bluetooth)和WiFi驱动程序

您也可以尝试重新安装蓝牙^(Bluetooth)设备驱动程序。我们列出了以下相同的步骤：

1. 右键单击^{(Right-click)}开始菜单^(Start)并选择设备管理器^{(Device Manager)}。
2. 在设备管理器中，展开蓝牙^(Bluetooth)节点。
3. 右键单击您的蓝牙^(Bluetooth)设备驱动程序并选择卸载设备^{(Uninstall device)}选项。按照屏幕上的说明进行操作。
4. 卸载过程完成后，重新启动计算机。
5. Windows 将在重新启动时扫描硬件更改并自动安装丢失的蓝牙^(Bluetooth)设备驱动程序。
6. 如果重新启动系统后驱动程序未自动安装，请打开设备管理器^{(Device Manager)}并转到“Action > Scan for hardware changes”。这将重新安装已卸载的蓝牙^(Bluetooth)设备驱动程序。

现在，检查问题是否已解决。

如果问题仍然存在，请尝试重新安装您的WiFi设备驱动程序。根据一些用户的说法，这个技巧解决了他们系统上的蓝牙^(Bluetooth)音频卡顿问题。执行此操作的过程与重新安装蓝牙^(Bluetooth)设备驱动程序相同。您将在网络适配器^{(Network adapters)}节点中找到您的WiFi设备驱动程序。

5]在无线网络^{(Wireless Network)}适配器属性中将漫游侵略性设置^{(Set Roaming Aggressiveness)}为最低^(Lowest)值

如果重新安装无线网络^{(Wireless Network)}适配器设备驱动程序没有解决蓝牙^(Bluetooth)音频卡顿问题，试试这个技巧。

^{(Set Roaming Aggressiveness)}在无线网络^{(Wireless Network)}适配器属性中将Roaming Aggressiveness 设置为最低^(Lowest)值。请按照以下说明进行操作：

1. 启动设备管理器。
2. 展开网络适配器^{(Network adapters)}节点。
3. 右键单击您的WiFi 适配器^{(WiFi adapter)}驱动程序并选择Properties。
4. 单击Advanced选项卡，然后在Property框中选择Roaming Aggressiveness 。
5. 单击“值^(Value)”下拉菜单并选择“最低^(Lowest)” 。
6. 单击确定以保存更改。

这可能会有所帮助。

6]禁用^(Disable)蓝牙^(Bluetooth)设备的远程控制^{(Remote Control)}属性

根据一些用户的说法，在禁用蓝牙^(Bluetooth)设备的远程控制^{(Remote Control)}属性后，该问题已得到解决。以下说明将指导您如何执行此操作。

1. 按Win + R键启动运行^(Run)命令框。现在，键入控制面板^{(Control Panel)}并单击确定。
2. 确保View by模式设置为Category。转到“Hardware and Sound > D设备和打印机^{(evices and Printers)}”。
3. 右键单击您的蓝牙^(Bluetooth)设备并选择Properties。
4. 单击“服务^(Services)”选项卡。
5. 取消选择远程控制^{(Remote Control)}复选框。
6. 单击应用，然后单击确定。

如果这不起作用，请尝试在“服务”选项卡中禁用免提电话网关^{(Handsfree Telephony Gateway)}。

7]在Broadcom网络^{(Broadcom Network)}适配器属性中禁用蓝牙协作^{(Disable Bluetooth Collaboration)}

Broadcom 网络^{(Broadcom Network)}适配器是Broadcom开发的程序。该软件可帮助您的设备连接到互联网。有时，它也会导致蓝牙^(Bluetooth)设备的干扰问题。您可以禁用Broadcom 网络适配器的^{(Broadcom Network)}蓝牙协作^{(Bluetooth Collaboration)}属性，看看它是否有帮助。执行此操作的步骤如下：

1. 启动设备管理器^{(Device Manager)}。
2. 展开网络适配器^{(Network adapters)}节点。
3. 右键单击Broadcom 网络适配器^{(Broadcom Network adapter)}并选择Properties。
4. 现在，单击高级^(Advanced)选项卡并从属性框中选择蓝牙协作。^{(Bluetooth Collaboration)}
5. 单击值^(Value)下拉菜单并选择禁用^(Disable)。
6. 单击确定以保存更改。

8]使用^(Use)USB 数据^(USB)线（适用于USB蓝牙^{(USB Bluetooth)}加密狗用户）

有时，主板的蓝牙^(Bluetooth)模块会出现电气干扰问题。可以通过增加USB 蓝牙^{(USB Bluetooth)}加密狗和计算机USB端口之间的距离来解决此问题。为此，请通过USB电缆连接您的USB 蓝牙加密狗。^{(USB Bluetooth)}

9]关闭^(Turn)其他设备的蓝牙或取消配对^(Bluetooth)

同时使用多个蓝牙^(Bluetooth)设备（如智能手机、BT 音频设备等）连接到特定设备有时可能会导致干扰问题。要修复它，请关闭您当前未使用的智能手机或其他蓝牙设备的^(Bluetooth)蓝牙。^(Bluetooth)如果这不起作用，请考虑取消配对其他蓝牙^(Bluetooth)设备。

10]重启蓝牙支持服务^{(Restart Bluetooth Support Service)}

如果蓝牙支持服务^{(Bluetooth Support Service)}运行不顺畅，也可能会出现此问题。您可以尝试重新启动蓝牙支持服务^{(Bluetooth Support Service)}，看看它是否会带来任何变化。

执行此操作的步骤如下：

1. 启动运行^(Run)命令框并键入services.msc。
2. 查找蓝牙支持服务^{(Bluetooth Support Service)}。
3. 找到它后，右键单击它并选择Restart。

为什么我的音频在 PC 上出现故障？

有很多原因可能会导致您在计算机上遇到音频故障问题。有时，音频故障是由损坏或过时的音频驱动程序引起的。因此^(Hence)，更新设备驱动程序可以解决问题。如果您的蓝牙^(Bluetooth)扬声器遇到此问题，您可以尝试本文中介绍的解决方案。

如何减少蓝牙^(Bluetooth)干扰？

有时蓝牙^(Bluetooth)设备会干扰使用相同频率的其他无线设备。这会导致无线信号受到干扰，从而阻止用户使用他们的蓝牙^(Bluetooth)设备。如果您的蓝牙^(Bluetooth)设备遇到干扰问题，您可以尝试以下方法：

1. 有时，微波设备可能会导致与其他无线设备的干扰问题。因此^(Hence)，您永远不应该将您的蓝牙^(Bluetooth)设备放在微波设备附近。
2. 使用蓝牙^(Bluetooth)设备时关闭WiFi路由器。如果可能，请更改WiFi路由器的频率。
3. 如果您的笔记本电脑连接了多个蓝牙^(Bluetooth)设备，请关闭当前未使用的设备的蓝牙。^(Bluetooth)

就是这样。

相关帖子^{(Related posts)}：

• 蓝牙设备未显示、配对或连接
• 如何增强或扩展蓝牙信号范围^{(How to boost or extend Bluetooth Signal Range)}。

Fix Bluetooth audio stuttering in Windows 11/10

In this pоst, we will liѕt the possible solutions to fix Bluetooth audio stuttering in Windows 11/10. Audio stuttering is also called Sound distortion. There are several causes of this error, like corrupted or outdated drivers, frequency issues, etc. Some users have reported that the issue was fixed when they turned off their WiFi connection. This usually happens when the Bluetooth uses the same frequency as the WiFi signal does.

Fix Bluetooth audio stuttering in Windows 11/10

If you are facing Bluetooth audio stuttering issue by connecting your Bluetooth audio device with Windows 11/10 computer, you can try the following solutions to fix the problem.

1. Run Bluetooth Troubleshooter.
2. Switch between WiFi bands.
3. Disable and re-enable the Audio Enhancements.
4. Reinstall the Bluetooth and WiFi drivers.
5. Set Roaming Aggressiveness to the Lowest value in the Wireless Network adapter properties.
6. Disable the Remote Control property of your Bluetooth device.
7. Disable Bluetooth Collaboration in Broadcom Network Adapter properties.
8. Use a USB cable.
9. Turn off the Bluetooth of other devices or unpair them.
10. Restart Bluetooth Support Service.

Let’s discuss all these solutions in detail.

1] Run Bluetooth Troubleshooter

Because this issue is related to Bluetooth, running the Bluetooth Troubleshooter may fix it. To run the troubleshooter, you have to follow the steps given below:

1. Right-click on the Start button and select Settings to open the Settings app.
2. Click Update & Security.
3. Select Troubleshoot from the left side.
4. Now, select Additional troubleshooters from the right pane.
5. Scroll down and select Bluetooth. After that, click the Run the troubleshooter button.

After the troubleshooting gets completed, see if the issue persists or not.

2] Switch between WiFi bands

One main cause of the Bluetooth audio stuttering problem on Windows 11/10 is the interference issue. The interference issue generally occurs when the two wireless devices use the same frequency. In your case, it is possible that the frequency of your Bluetooth device and WiFi router is the same. To check it, you can turn off your WiFi router and see if it helps. If it works, it means that you are encountering this issue due to the Bluetooth and WiFi signal interference. This can be fixed by changing the frequency of your WiFi router.

3] Disable and re-enable the Audio Enhancements

Windows 10 comes with Audio Enhancements feature that you can use to increase the sound quality of particular audio hardware. Sometimes, this feature causes some issues with the audio devices. If the above two solutions did not help you fix the issue, you can try this trick; disable the Audio Enhancements on your system and then re-enable them again.

4] Reinstall the Bluetooth and WiFi drivers

You can also try reinstalling your Bluetooth device drivers. We have listed the steps for the same below:

1. Right-click on the Start menu and select Device Manager.
2. In the Device Manager, expand the Bluetooth node.
3. Right-click on your Bluetooth device driver and select the Uninstall device option. Follow the on-screen instructions.
4. After the uninstallation process gets completed, reboot your computer.
5. Windows will scan for the hardware changes on the restart and install the missing Bluetooth device driver automatically.
6. If the driver is not installed automatically after restarting your system, open Device Manager and go to “Action > Scan for hardware changes.” This will reinstall the uninstalled Bluetooth device driver.

Now, check if the issue is fixed.

If the issue still persists, try reinstalling your WiFi device driver. According to some users, this trick fixed the Bluetooth audio stuttering problem on their system. The procedure to do this is the same as reinstalling the Bluetooth device driver. You will find your WiFi device driver in the Network adapters node.

5] Set Roaming Aggressiveness to the Lowest value in the Wireless Network adapter properties

If reinstalling the Wireless Network adapter device driver did not fix the Bluetooth audio stuttering issue, try this trick.

Set Roaming Aggressiveness to the Lowest value in the Wireless Network adapter properties. Follow the instructions below:

1. Launch the Device Manager.
2. Expand the Network adapters node.
3. Right-click on your WiFi adapter driver and select Properties.
4. Click on the Advanced tab and then select Roaming Aggressiveness in the Property box.
5. Click on the Value drop-down menu and select Lowest.
6. Click OK to save the changes.

This may help.

6] Disable the Remote Control property of your Bluetooth device

According to some users, the issue was fixed after disabling the Remote Control property of the Bluetooth device. The following instructions will guide you on how to do this.

1. Press Win + R keys to launch the Run command box. Now, type Control Panel and click OK.
2. Make sure that the View by mode is set to Category. Go to “Hardware and Sound > Devices and Printers.”
3. Right-click on your Bluetooth device and select Properties.
4. Click on the Services tab.
5. Deselect the Remote Control checkbox.
6. Click Apply and then OK.

If this does not work, try disabling the Handsfree Telephony Gateway in the Services tab.

7] Disable Bluetooth Collaboration in Broadcom Network adapter properties

Broadcom Network adapter is a program developed by Broadcom. This software helps your device connect to the internet. Sometimes, it can also cause interference issues with Bluetooth devices. You can disable the Bluetooth Collaboration property of your Broadcom Network adapter and see if it helps. The steps to do this are as follows:

1. Launch Device Manager.
2. Expand the Network adapters node.
3. Right-click on Broadcom Network adapter and select Properties.
4. Now, click on the Advanced tab and select Bluetooth Collaboration from the Property box.
5. Click on the Value drop-down menu and select Disable.
6. Click OK to save the changes.

8] Use a USB cable (for USB Bluetooth dongle users)

Sometimes, electrical interference issues occur on the motherboard’s Bluetooth module. This problem can be solved by increasing the distance between the USB Bluetooth dongle and the USB port of your computer. To do so, connect your USB Bluetooth dongle via a USB cable.

9] Turn off the Bluetooth of other devices or unpair them

Using multiple Bluetooth devices, such as smartphones, BT audio devices, etc., connected to a particular device at the same time may sometimes cause the interference issue. To fix it, turn off the Bluetooth of your smartphone or other Bluetooth devices that you are not using currently. If this does not work, consider unpairing other Bluetooth devices.

10] Restart Bluetooth Support Service

The issue may also occur if the Bluetooth Support Service is not running smoothly. You can try restarting the Bluetooth Support Service and see if it brings any changes.

The steps to do this are given below:

1. Launch the Run command box and type services.msc.
2. Find the Bluetooth Support Service.
3. Once you find it, right-click on it and select Restart.

Why is my audio glitching on PC?

There are many reasons for which you may face audio glitching issues on your computer. Sometimes, audio glitching is caused due to corrupted or outdated audio drivers. Hence, updating the device drivers can fix the issue. If you are facing this issue with your Bluetooth speaker, you can try the solutions explained in this article.

How do I reduce Bluetooth interference?

Sometimes the Bluetooth devices interfere with the other wireless devices that use the same frequency. This causes disturbance in the wireless signal, which prevents users from using their Bluetooth devices. If you experience interference issues with your Bluetooth devices, you can try the following things:

1. Sometimes, microwave devices can cause interference issues with other wireless devices. Hence, you should never place your Bluetooth gadgets near microwave devices.
2. Turn off your WiFi router while using the Bluetooth device. If possible, change the frequency of your WiFi router.
3. If you have more than one Bluetooth device connected to your laptop, turn off the Bluetooth of the devices that are currently not in use.

That’s it.

Related posts:

• Bluetooth devices not showing, pairing or connecting
• How to boost or extend Bluetooth Signal Range.

Related posts

• Windows 10中的Fix Bluetooth声音延迟

• Bluetooth Mouse随机断开或不在Windows 11/10中工作

• 如何使用Swift Pair将Bluetooth设备配对Windows 10？

• 如何在Windows 10安装Bluetooth adapter更换

• Bluetooth speaker连接，但Windows 10中没有Sound or Music

• 如何检查Bluetooth version在Windows 10

• 修复 Windows 10 创意者更新后蓝牙无法正常工作

• Bluetooth Headphones不工作的Windows 10

• Windows 11/10上的Fix Epic Games error code IS-MF-01 and LS-0009

• Fix Device在Windows 10计算机上未迁移消息

• Fix Minecraft无法在Windows 11/10连接到世界

• Fix Bluetooth无法在Windows 10上关闭

• Windows 11/10上的Fix Epic Games error代码LS-0003

• Fix Win+Shift+S在Windows 11/10中不起作用

• Fix Bluetooth将在Windows 10中打开

• Fix c000021A Fatal System Error上Windows 10

• 如何在Windows 11/10上提升或扩展Bluetooth Signal Range

• Bluetooth Remove失败;在Windows 11/10无法删除Bluetooth Device

• Windows 10中的Fix ShellExecuteEx错误错误

• Fix Hulu在Windows 11/10上保持缓冲或冻结