修复异常未知软件异常 (0xe0434352)： ^{(Fix The exception unknown software exception (0xe0434352): )}如果您在关机时遇到错误代码 0xe0434352，那么这意味着您的 .NET 安装存在问题。在大多数情况下，出现错误 0xe0434352 是因为.NET Framework存在问题。但在某些情况下，它也可能是由于损坏或旧驱动程序似乎与Windows冲突而导致的错误。因此，不要浪费任何时间，让我们看看如何在下面列出的步骤的帮助下实际修复应用程序中发生的异常未知软件异常 (0xe0434352)。

异常未知软件异常 (0xe0434352) 发生在位置 0x77312c1a 的应用程序中。^{(The exception unknown software exception (0xe0434352) occurred in the application at location 0x77312c1a.)}

修复异常未知软件异常（0xe0434352）

确保创建一个还原点^{(create a restore point)} 以防万一出现问题。

方法 1：执行干净启动^{(Method 1: Perform a Clean Boot)}

有时，第 3 方软件可能会与应用程序发生冲突并导致应用程序错误。为了修复异常未知软件异常（0xe0434352）错误^{(Fix The exception unknown software exception (0xe0434352) error)}，您需要在您的PC上执行干净启动^{(perform a clean boot)} 并逐步诊断问题。

方法 2：运行 SFC 和 CHKDSK^{(Method 2: Run SFC and CHKDSK)}

1.按Windows Key + X然后单击命令提示符（管理员）。^{(Command Prompt (Admin).)}

具有管理员权限的命令提示符

2.现在在cmd中输入以下内容并回车：

Sfc /scannow
sfc /scannow /offbootdir=c:\ /offwindir=c:\windows

SFC 立即扫描命令提示符

3.等待上述过程完成，完成后重新启动您的电脑。

4.接下来，从这里运行 CHKDSK Fix File System Errors with Check Disk Utility(CHKDSK)。

5.让上述过程完成并再次重新启动您的 PC 以保存更改。

方法 3：运行系统还原^{(Method 3: Run System Restore)}

1.按 Windows 键 + R 并输入“ sysdm.cpl ”然后回车。

系统属性 sysdm

2.选择系统保护^{(System Protection)}选项卡，然后选择系统还原。^{( System Restore.)}

系统属性中的系统还原

3.单击下一步并选择所需的系统还原点^{(System Restore point)}。

系统还原

4.按照屏幕提示完成系统还原。

5.重启后，您可能能够修复异常未知软件异常（0xe0434352）错误。^{(Fix The exception unknown software exception (0xe0434352) error.)}

方法 4：运行 Microsoft .NET Framework 修复工具^{(Method 4: Run Microsoft .NET Framework Repair Tool)}

此工具检测并尝试修复一些与 Microsoft Bootstrapper .NET Framework设置或^(Framework)Microsoft .NET Framework更新相关的常见问题^{(fix some frequently occurring issues with the setup of Microsoft Bootstrapper)}。因此，为了运行此工具，请访问Microsoft 网站^{(Microsoft website)}并下载它。

方法 5：重新安装 .NET Framework^{(Method 5: Reinstall .NET Framework)}

1.按Windows Key + X然后选择控制面板。^{(Control Panel.)}

控制面板

2.单击卸载程序并在列表中找到.NET framework。

3.右键单击 .Net Framework 并选择卸载。^{(select Uninstall.)}

4.如果要求确认，请选择Yes/OK。

5.一旦卸载完成，请确保重新启动您的 PC 以保存更改。

6.现在按Windows Key + E然后导航到Windows文件夹：C:\Windows\

7.在Windows文件夹下将程序集文件夹重命名为assembly1 ^(assembly)。^(assembly1.)

将程序集重命名为 assembly1

8. 同样，将Microsoft.NET重命名为Microsoft.NET1。

9.按 Windows 键 + R 然后输入“ regedit ”并回车。

运行命令 regedit

10.导航到以下注册表^{(Registry Key)}项：HKEY_LOCAL_MACHINE\Software\Microsoft

11.删除 .NET Framework密钥，然后关闭所有内容并重新启动 PC。

从注册表中删除 .NET Framework 项

12.下载并安装.Net Framework^{(Install .Net Framework)}。

下载 Microsoft .NET Framework 3.5^{(Download Microsoft .NET Framework 3.5)}

下载 Microsoft .NET Framework 4.5^{(Download Microsoft .NET Framework 4.5)}

为你推荐：^{(Recommended for you:)}

修复 CD 或 DVD 驱动器错误代码 39^{(Fix CD or DVD Drive Error Code 39)}
如何修复鼠标滚动在 Windows 10 上不起作用^{(How To Fix Mouse Scroll Not Working On Windows 10)}
修复 USB 不工作错误代码 39^{(Fix USB Not Working Error Code 39)}
Fix DVD/CD Rom Error Code 19 on Windows 10

就是这样，您已成功修复发生异常未知软件异常（0xe0434352）错误^{(Fix The exception unknown software exception (0xe0434352) error)}，但如果您对该帖子仍有任何疑问，请随时在评论部分询问。

Fix The exception unknown software exception (0xe0434352)

Fix The exception unknown software exception (0xe0434352): If you are facing the error code 0xe0434352 on shutdown then this means you are facing a problem with your .NET installation. In most cases, the error 0xe0434352 appears because of issues persisting with .NET Framework. But in some cases, it can also be caused because of corrupted or old drivers which seems to be conflicting with Windows and hence the error. So without wasting any time let’s see how to actually Fix The exception unknown software exception (0xe0434352) occurred in the application with the help of below-listed steps.

The exception unknown software exception (0xe0434352) occurred in the application at location 0x77312c1a.

Make sure to create a restore point just in case something goes wrong.

Method 1: Perform a Clean Boot

Sometimes 3rd party software can conflict with the application and can cause the application error. In order to Fix The exception unknown software exception (0xe0434352) error, you need to perform a clean boot on your PC and diagnose the issue step by step.

Method 2: Run SFC and CHKDSK

1.Press Windows Key + X then click on Command Prompt (Admin).

command prompt with admin rights

2.Now type the following in the cmd and hit enter:

Sfc /scannow
sfc /scannow /offbootdir=c:\ /offwindir=c:\windows

SFC scan now command prompt

3.Wait for the above process to finish and once done restart your PC.

4.Next, run CHKDSK from here Fix File System Errors with Check Disk Utility(CHKDSK).

5.Let the above process complete and again reboot your PC to save changes.

Method 3: Run System Restore

1.Press Windows Key + R and type”sysdm.cpl” then hit enter.

system properties sysdm

2.Select System Protection tab and choose System Restore.

system restore in system properties

3.Click Next and choose the desired System Restore point.

system-restore

4.Follow the on-screen instruction to complete system restore.

5.After reboot, you may be able to Fix The exception unknown software exception (0xe0434352) error.

Method 4: Run Microsoft .NET Framework Repair Tool

This tool detects and tries to fix some frequently occurring issues with the setup of Microsoft Bootstrapper .NET Framework or with updates to the Microsoft .NET Framework. So in order to run this tool head over to Microsoft website and download it.

Method 5: Reinstall .NET Framework

1.Press Windows Key + X then select Control Panel.

control panel

2.Click Uninstall a program and find .NET framework in the list.

3.Right-click on .Net Framework and select Uninstall.

4.If asks for confirmation then select Yes/OK.

5.Once uninstall is complete make sure to reboot your PC to save changes.

6.Now press Windows Key + E then navigate to Windows folder: C:\Windows\

7.Under Windows folder rename assembly folder to assembly1.

rename assembly to assembly1

8.Similarly, rename Microsoft.NET to Microsoft.NET1.

9.Press Windows Key + R then type “regedit” and hit Enter.

Run command regedit

10.Navigate to the following Registry Key: HKEY_LOCAL_MACHINE\Software\Microsoft

11.Delete the .NET Framework key then close everything and restart your PC.

delete .NET Framework key from registry

12.Download and Install .Net Framework.

Download Microsoft .NET Framework 3.5

Download Microsoft .NET Framework 4.5

Recommended for you:

That’s it you have successfully Fix The exception unknown software exception (0xe0434352) error occurred but if you still have any queries regarding this post then feel free to ask them in the comment’s section.

鑫赵

About the author

我是一名软件工程师，拥有 Xbox Explorer、Microsoft Excel 和 Windows 8.1 Explorer 方面的经验。业余时间，我喜欢玩电子游戏和看电视。我拥有犹他大学的学位，目前在一家国际公司担任软件工程师。

修复异常未知软件异常（0xe0434352）

修复异常未知软件异常（0xe0434352）

方法 1：执行干净启动^{(Method 1: Perform a Clean Boot)}

方法 2：运行 SFC 和 CHKDSK^{(Method 2: Run SFC and CHKDSK)}

方法 3：运行系统还原^{(Method 3: Run System Restore)}

方法 4：运行 Microsoft .NET Framework 修复工具^{(Method 4: Run Microsoft .NET Framework Repair Tool)}

方法 5：重新安装 .NET Framework^{(Method 5: Reinstall .NET Framework)}

Fix The exception unknown software exception (0xe0434352)