如果您的耳机无法正常工作 - 可能是在安装更新后，这可能是由于操作系统和驱动程序不兼容。对几个计算机组件的更新旨在修复损坏的东西，但有时会导致损坏其他一些组件。一种这样的情况是Windows 更新(Windows Update)破坏了耳机。计算机停止使用耳机播放任何音频。此错误是由于驱动程序不兼容引起的。
耳机在Windows 11/10
如果您的耳机无法正常工作或被检测到，这里有一些可行的解决方案可以帮助您：
- 手动将耳机(Headphones)设置为默认设备。
- 确保使用正确的端口
- 禁用前面板插孔检测
- AC97 上的高清音频
- 重启音频服务
- 更新或回滚您的音频驱动程序。
- 使用音频疑难解答。
- 回滚或安装更新的Windows 更新(Windows Update)。
其中一些可能需要管理员权限才能修复。假设静音按钮未激活，
1]手动将耳机设置(Manually Set Headphones)为默认设备(Default Device)
有时，当插入耳机时，它不会切换默认音频设备或默认播放设备。在这种情况下，您只需将默认音频设备设置为耳机即可。
右键单击(Right-click)系统托盘上的音量控制图标，然后选择打开声音设置。(Open sound settings. )它将打开 Windows 10设置(Settings)应用程序中的声音 (Sound )部分。
在输出部分下 ， (Output, )为选择您的默认输出设备(for Choose your default output device.)选择 耳机 。(Headphones )
这应该可以让耳机在您的 Windows 10 设备上正常工作。
2]确保使用正确(Right)的端口
如果是有线耳机，请确保已将电线连接到正确的端口。通常有两个端口——音频输出和麦克风(Mic)输入。通常(Often)，您会连接到错误的端口，因为这很容易习惯，我们无需查看端口即可连接。因此，如果是这种情况，请连接到正确的端口。
阅读(Read)： 外部麦克风被识别为耳机。(External Microphone being recognized as Headphones.)
3]禁用前面板插孔检测(Disable Front Panel Jack Detection)
音频可能正在流向机柜的前面板(Front Panel)。即使您更改了默认音频，如果没有更改，您也可以更改前面板插孔检测功能。
打开Realtek 音频控制台(Realtek Audio Console)，然后单击设备(Device)配置。找到允许您禁用前面板音频插孔检测的切换开关。
您还可以选择使前后音频流不同的音频输出。因此，如果您想从不同的端口听到不同的音频，您可以做到。
4]使用AC97上的高清音频
这是硬件接线，您需要确保主板的连接正确。一些OEM(OEMs)提供HD 音频(HD Audio)和AC97。如果您已连接AC97，但它无法正常工作，请查看您的主板手册，并将其更改为HD Audio。
另一个问题可能是前面板音频连接器有 2 个连接器 - 一个用于AC97，第二个用于 HD 音频。您只能使用其中之一。因此，如果您以某种方式连接到两者，请选择高清音频。
5]重新启动音频服务
如果您也无法收听系统音频，则可能是音频(Audio)服务有问题。您需要打开Windows 服务(Services)并重新启动或启用音频服务。( restart or enable the Audio Service.)
阅读(Read)：耳机插孔在笔记本电脑上不起作用。
6]更新(Update)或回滚您的音频(Rollback Your Audio)和蓝牙驱动程序(Bluetooth Drivers)
如果更新是最新的，您可以 将该驱动程序回滚到不会触发此问题的旧版本。如果没有更新，则可能需要将过时的驱动程序更新到最新版本。如果可用，请安装 该驱动程序的新版本。( a new version of that driver)确保(Make)它是正确的设备驱动程序
您需要关注的驱动因素是：
7]使用音频疑难解答
- Windows 10：单击“开始(Start)”按钮，然后转到Settings > Updates and Security > Troubleshoot。从列表中选择播放音频( Playing Audio)疑难解答并运行它。
- Windows 11：单击“开始(Start)”按钮，然后转到Settings > System > Troubleshoot。从列表中选择播放音频( Playing Audio)疑难解答并运行它。
按照屏幕上的说明进行操作，这将解决您的问题。
进一步阅读(Further reading)：解决 Windows 声音和音频问题(Troubleshoot Windows Sound and Audio problems)。
8]回滚(Rollback)或安装更新的Windows Update
如果最近安装Windows 更新(Windows Update)后出现此问题，您可以卸载最近的 Windows 更新(uninstall recent Windows Updates)并重新启动计算机以解决此问题。
或者，您也可以检查更新(check for updates) 以获取Microsoft可能已发布的补丁。
我希望本指南可以帮助您解决问题。(I hope this guide helped you in troubleshooting the issue.)
为什么我的耳机插入电脑后无法工作？
确保(Make)它们正确插入。如果您有两个插孔，请使用颜色或文本匹配它们。如果将麦克风线插入音频插孔，它将不起作用。此外，如果声音低或听起来不正确，请确保未选中声音增强。(sound enhancements)
为什么蓝牙耳机(Bluetooth Headphones)不工作(Working)？
如果其他一切都很好，那么它是蓝牙(Bluetooth)兼容性。您的耳机蓝牙(Bluetooth)版本与 PC 或笔记本电脑上的蓝牙版本不同，唯一的选择是更换耳机或获取与耳机版本匹配的新蓝牙(Bluetooth)适配器。
这并不奇怪。我见过蓝牙(Bluetooth)耳机不能在Macbook上使用，它与蓝牙(Bluetooth)版本有关。
为什么我可以在耳机(My Headset)中听到自己的声音？
这是因为麦克风增强(Microphone Boost)。虽然它用于提高麦克风(Microphone)的整体性能，但它可能会干扰，因此您会听到自己的声音和回声。另一个原因可能是，如果您有另一个麦克风源连接到同一个在线会议，您需要确保第二个源已关闭或静音。
现在阅读(Now read)：Front Audio Jack 在 Windows 中不起作用(Front Audio Jack not working in Windows)。
Headphones not working or detected in Windows 11/10 Fix
If your Heаdphоnes are not working – maybe after installing an Updаte, it cоuld be dυe to incompаtible OS and drivers. Updatеs to several computer components are meant to fix stuff that is brоken but sometіmes resυlts in breaking somе other components. One such scenario is where а Windows Update breaks the headphonе. Thе computer stops playing any audio using the headphones. This error is саused duе to incompatible drivers.
Headphones not working in Windows 11/10
Here are some working solutions that will help you if your Headphones are not working or being detected:
- Manually set Headphones as the default device.
- Make sure you use the right ports
- Disable front panel jack detection
- HD Audio Over AC97
- Restart the Audio Service
- Update or roll back your Audio drivers.
- Use the Audio Troubleshooter.
- Rollback or install a newer Windows Update.
Some of these may need admin permission to fix it. Assuming that the mute button is not active,
1] Manually Set Headphones as the Default Device
Sometimes, when a headphone is plugged in, it does not toggle the default audio device or default playback device. In this case, you can just set the default audio device to the headphones.
Right-click on the volume control icon on the system tray and select Open sound settings. It will open the Sound section in the Windows 10 Settings app.
Under the section of Output, select Headphones for Choose your default output device.
This should get the headphones working on your Windows 10 device.
2] Make Sure You Use the Right Ports
If it is a wired headphone, make sure you have connected the wire to the correct port. There are usually two ports—Audio out and Mic input. Often, you connect to the wrong port as it’s easy to get used to, and we connect without looking at the port. So if that’s the case, then connect to the right port.
Read: External Microphone being recognized as Headphones.
3] Disable Front Panel Jack Detection
It is possible that the audio is being streamed towards the Front Panel of the cabinet. Even when you have changed the default audio, you can change the front panel jack detection feature if there is no change.
Open Realtek Audio Console and then click on Device configuration. Locate the toggle that allows you to disable the front panel audio jack detection.
You can also choose to make the front and rear audio streams different audio outputs. So if you want to hear different audio from different ports, you can do it.
4] Use HD Audio Over AC97
It’s hardware wiring where you need to make sure the connection from the motherboard is correct. Some OEMs offer both HD Audio and AC97. If you have connected AC97, and it’s not working, check your motherboard manual, and change it to HD Audio.
Another issue could be that the front panel audio connector has 2 connectors—one for AC97 and the second for HD audio. You can use only one of them. So if you have connected to both somehow, choose HD audio.
5] Restart Audio Service
If you cannot listen to system audio as well, it’s probably the Audio service that has the problem. You need to open the Windows Services and restart or enable the Audio Service.
Read: Headphone jack not working on a laptop.
6] Update or Rollback Your Audio & Bluetooth Drivers
If the update is recent, you can roll back that driver to an older version that does not trigger this issue. In case there was no update, it is possible that the outdated drivers need to be updated to the latest version. Install a new version of that driver if available. Make sure it is the correct device driver
The drivers you need to focus on are:
- Bluetooth.
- Sound, video, and game controllers.
7] Use the Audio Troubleshooter
- Windows 10: Click on the Start button and go to Settings > Updates and Security > Troubleshoot. Select the Playing Audio troubleshooter from the list and run it.
- Windows 11: Click on the Start button and go to Settings > System > Troubleshoot. Select the Playing Audio troubleshooter from the list and run it.
Follow the on-screen instructions, and this will fix your issue.
Further reading: Troubleshoot Windows Sound and Audio problems.
8] Rollback or install a newer Windows Update
If this issue has occurred after installing a Windows Update recently, you can uninstall recent Windows Updates and reboot your computer to fix this issue.
Alternatively, you can also check for updates to get a patch for this, which Microsoft may have released.
I hope this guide helped you in troubleshooting the issue.
Why are my headphones not working when I plug them into PC?
Make sure they are inserted correctly. If you have two jacks, match them using the color or text. If you insert the microphone wire into an audio jack, it will not work. Also, make sure the sound enhancements are unchecked if the sound is low or doesn’t sound right.
Why Are the Bluetooth Headphones Not Working?
If everything else is fine, then it’s Bluetooth compatibility. Your headphone Bluetooth version and the one on your PC or laptop are different, and the only option is to either change the headphone or get a new Bluetooth adaptor that matches the version of the headphone.
It is not strange. I have seen Bluetooth earphones not work with Macbook, and it has to do with the Bluetooth version.
Why Can I Hear Myself in My Headset?
It is because of the Microphone Boost. While it is used to improve overall Microphone performance, it might interfere so that you will listen to your own voice and echo. Another reason could be that if you have another microphone source connected to the same online meeting, you need to ensure the second source is turned off or on mute.
Now read: Front Audio Jack not working in Windows.
