您(Are)是否正在寻找一种在Windows 10中永久禁用Windows Defender的方法?不要再看了,因为在本指南中,我们将讨论 4 种不同的方法来禁用Windows Defender。但在此之前,我们应该多了解一下Defender Antivirus。Windows 10附带其默认的防病毒(Antivirus)引擎Windows Defender。它可以保护您的设备免受恶意软件和病毒的侵害。对于大多数用户来说,Windows Defender可以正常工作,并且可以保护他们的设备。但是对于某些用户来说,它可能不是最好的防病毒软件(Antivirus),这就是他们想要安装第三方防病毒软件的原因(Antivirus)程序,但为此,他们首先需要禁用Windows Defender。
当您安装第三方防病毒(Antivirus)程序时,Windows Defender会自动被禁用,但仍会在消耗数据的后台运行。此外,始终建议在激活任何第三方防病毒软件(Antivirus)时,您首先需要禁用已经运行的防病毒软件,以避免程序之间的任何冲突导致您的设备保护出现问题。(Antivirus)没有直接的方法可以在您的设备中禁用此功能;但是,我们可以强调不止一种禁用Windows Defender的方法。当您想从您的设备禁用这个强大的防病毒(Antivirus)引擎时,有多种情况。
在Windows 10中永久禁用Windows Defender
确保 创建一个还原点(create a restore point) 以防万一出现问题。
方法 1:使用本地组策略禁用 Windows Defender(Method 1: Disable Windows Defender Using Local Group Policy)
此方法仅适用于Windows 10 专业版(Pro)、企业(Enterprise)版或教育(Education)版。此方法可帮助您永久禁用Windows 10中的Windows Defender 。您需要做的就是按照以下步骤操作:
1. 您需要按Windows键 + R 打开运行(Run)命令并输入gpedit.msc。
2. 单击确定并打开本地组策略编辑器。(Local Group Policy Editor.)
3. 按照上述路径打开Window Defender Antivirus文件夹:
Computer Configuration > Administrative Templates > Windows Components > Windows Defender Antivirus
4. 现在要关闭此功能,您需要双击(double-click)关闭Windows Defender 防病毒策略。( Turn off Windows Defender Antivirus policy.)
5. 在这里,您需要选择启用选项(Enabled option)。它将在您的设备上永久关闭此功能。
6. 单击应用,然后单击确定(OK)以保存更改。
7.重新启动您的设备以在您的设备上激活设置。
如果您仍然在任务栏通知部分看到盾牌图标(shield icon),您不必担心,因为它是安全中心的一部分,而不是防病毒软件(Antivirus)的一部分。因此它将显示在任务栏中。
如果您改变心情,您可以按照相同的步骤重新激活防病毒功能;但是,您需要将启用更改为未配置(change Enabled to Not Configured)并重新启动系统以应用新设置。
方法 2:使用注册表禁用 Windows Defender(Method 2: Disable Windows Defender using Registry )
在Windows 10中还有另一种关闭Windows Defender的方法。如果您无权访问本地组策略编辑器,则可以选择此方法永久禁用默认防病毒软件。
注意:(Note:)更改注册表是有风险的,可能会造成不可逆转的损失;因此,强烈建议在开始此方法之前备份您的注册表。(backup of your Registry)
1. 按Windows键 + R 打开运行(Run)对话框。
2. 在这里你需要输入regedit,然后点击 OK ,这将打开Registry。
3.您需要浏览到以下路径:
HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows Defender
4. 如果您没有找到DisableAntiSpyware DWORD,您需要右键单击(right-click)Windows Defender (文件夹) 键,选择New,然后单击DWORD (32-bit) 值。(DWORD (32-bit) Value.)
5. 您需要给它一个新名称DisableAntiSpyware并按 Enter。
6. 双击这个新形成的DWORD,您需要将值从0 设置为 1。(0 to 1.)
7. 最后,您需要点击OK按钮保存所有设置。
完成这些步骤后,您需要重新启动设备以应用所有这些设置。重新启动设备后,您会发现Windows Defender 防病毒现在已禁用。(Windows Defender antivirus is now disabled.)
方法 3:使用安全中心应用关闭 Windows Defender(Method 3: Turn Off Windows Defender using the Security Center app)
此方法将在Windows 10(Windows 10)中暂时禁用Windows Defender。但是,该过程中涉及的步骤非常简单。请记住,这将暂时禁用 Windows Defender,(disable the Windows Defender Temporarily, )而不是永久禁用。
1. 按 Windows 键 + I 打开设置( Settings),然后单击更新和安全(Update & Security)图标。
2. 从左侧,选择Windows 安全(Windows Security )中心或 Windows Defender 安全中心。(Windows Defender Security Center.)
3. 单击病毒和威胁防护。(Virus & threat protection.)
4. 单击新窗口中的病毒和威胁防护(Virus & threat protection)设置。
5.关闭实时保护(Turn off the Real-time protection)以禁用 Windows Defender。
完成这些步骤后,Windows Defender 将被暂时禁用(Windows Defender will be disabled temporarily)。下次重新启动系统时,它将自动重新启用此功能。
方法 4:使用 Defender 控件禁用 Windows Defender(Method 4: Disable Windows Defender using Defender Control)
Defender Control是一个第三方工具,具有良好的界面,您可以在其中获得许多选项来完成任务。启动Defender Control后,您将找到关闭Windows Defender的选项。单击它后,等待几秒钟以禁用Windows Defender。
希望上述方法可以帮助您根据自己的喜好永久或暂时关闭或禁用Windows Defender 。但是,不建议在Windows 10(Windows 10)中关闭此默认功能。此防病毒软件(Antivirus)可帮助您保护系统免受恶意软件和病毒的侵害。但是,当您需要暂时或永久禁用它时,可能会有不同的情况。
受到推崇的:(Recommended:)
我希望这篇文章对您有所帮助。您现在可以轻松地 在 Windows 10 中永久禁用 Windows Defender( Disable Windows Defender Permanently in Windows 10),但如果您对本教程仍有任何疑问,请随时在评论部分提出。
Permanently Disable Windows Defender in Windows 10
Are уou loоking for a way to disаble Windows Defender permanеntly in Windows 10? Look no further as in this guide we will discuss 4 different ways to disable Windows Defender. But before that, we should know a little more about Defender Antivirus. Windows 10 comes with its default Antivirus engine, Windows Defender. Іt secυres your device from malwarе and viruses. For most users, Wіndows Defender wоrks fіnе, and it keeps their device protеcted. But for some users, it might not be the best Antivirus out there, and that’s why they want to install a third-party Antivirus prоgram, but for that, they first need to disable Windows Defender.
When you install a third-party Antivirus program, Windows Defender automatically gets disabled but still runs on the background which consumes data. Moreover, it is always recommended that while activating any third party Antivirus, you first need to disable the Antivirus which is already running to avoid any conflicts between the programs causing a problem for your device protection. There is no direct way to disable this feature in your device; however, we can highlight more than one ways to disable the Windows Defender. There are various scenarios when you want to disable this robust Antivirus engine from your device.
Permanently Disable Windows Defender in Windows 10
Make sure to create a restore point just in case something goes wrong.
Method 1: Disable Windows Defender Using Local Group Policy
This method only works for Windows 10 Pro, Enterprise or Education edition. This method helps you to disable Windows Defender in Windows 10 permanently. All you need to do is follow the steps:
1. You need to press Windows key + R to open the Run command and type gpedit.msc.
2. Click OK and open Local Group Policy Editor.
3. Follow the mentioned path to open Window Defender Antivirus folder:
Computer Configuration > Administrative Templates > Windows Components > Windows Defender Antivirus
4. Now to turn off this feature, you need to double-click on Turn off Windows Defender Antivirus policy.
5. Here, you need to select the Enabled option. It will turn off this feature permanently on your device.
6. Click Apply, followed by OK to save changes.
7.Reboot your device to get the settings activated on your device.
You do not need to worry if you still see the shield icon in the taskbar notification section, as it is a part of the security center not the part of Antivirus. Therefore it will be showing in the taskbar.
If you change your mood, you can reactivate the antivirus feature by following the same steps; however, you need to change Enabled to Not Configured and reboot your system to apply the new settings.
Method 2: Disable Windows Defender using Registry
There is another method to turn off Windows Defender in Windows 10. If you do not have access to local group policy editor, you can choose this method to disable the default antivirus permanently.
Note: Changing registry is risky, which can cause irreversible damages; therefore, it is highly recommended to have a backup of your Registry before starting this method.
1. Press Windows key + R to open the Run dialog box.
2. Here you need to type regedit, and click OK, which will open the Registry.
3. You need to browse to the following path:
HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows Defender
4. If you do not find DisableAntiSpyware DWORD, you need to right-click Windows Defender (folder) key, select New, and click on DWORD (32-bit) Value.
5. You need to give it a new name DisableAntiSpyware and press Enter.
6. Double-click on this newly formed DWORD where you need to set the value from 0 to 1.
7. Finally, you need to click on the OK button to save all settings.
Once you are done with these steps, you need to reboot your device to apply all these settings. After restarting your device, you will find that Windows Defender antivirus is now disabled.
Method 3: Turn Off Windows Defender using the Security Center app
This method will disable the Windows Defender temporarily in Windows 10. However, the steps involved in the process are very simple. Keep in mind that this will disable the Windows Defender Temporarily, not permanently.
1. Press Windows Key + I to open Settings then click on Update & Security icon.
2. From the left-hand side, select Windows Security or Windows Defender Security Center.
3. Click on the Virus & threat protection.
4. Click on the Virus & threat protection settings in the new window.
5. Turn off the Real-time protection to disable the Windows Defender.
After completing these steps, Windows Defender will be disabled temporarily. Next time when you restart your system, it will re-enable this feature automatically.
Method 4: Disable Windows Defender using Defender Control
Defender Control is a third party tool which has a good interface wherein you will get many options to get your task done. Once you launch Defender Control, you will find the option to Turn Off Windows Defender. Once you click on it, wait for a few seconds to disable Windows Defender.
Hopefully, the above-mentioned methods will help you turn off or disable Windows Defender either permanently or temporarily depending on your preference. However, it is not recommended to turn off this default feature in Windows 10. This Antivirus helps you protect your system from malware and virus. However, there could be different scenarios when you need to disable it temporarily or permanently.
Recommended:
I hope this article was helpful. You can now easily Disable Windows Defender Permanently in Windows 10, but if you still have any questions regarding this tutorial, please feel free to ask them in the comment’s section.