TP-Link 的Wi-Fi 6路由器系列包括一些令人兴奋的型号，这些型号具有良好的硬件且价格非常合理。如果你想要一个好的中档型号，你应该看看新的TP-Link Archer AX20或TP-Link WiFi 6 路由器 AX1800(Router AX1800)，你可以在亚马逊(Amazon)上找到它。与Archer AX10相比，Archer AX20增加了一些可能引起您兴趣的功能和改进。阅读这篇评论，看看TP-Link Archer AX20是否适合您：
TP-Link Archer AX20：它对谁有好处？
该无线路由器适用于：
- 想要价格合理的 Wi-Fi 6 路由器的人
- 三居室公寓或房屋
- 想要通过移动应用程序控制路由器的人
- 想要使用Alexa语音助手控制家庭网络的用户
- 想要通过IFTTT从无线路由器获得任务自动化服务的人（如果这样，那就这样）
优点和缺点
以下是我们喜欢TP-Link Archer AX20 的地方(TP-Link Archer AX20)：
查看价格：
Buy now
- 同时使用 Wi-Fi 6 和 Wi-Fi 5 时性能良好
- 合理的价格
- (Solid)可以处理许多网络客户端的坚固硬件
- 该固件易于使用和配置
- 您可以使用移动应用程序远程控制它
- 强大的多语言支持
- 它有一个USB端口
也有一些缺点：
- 在 2.4 GHz(GHz)频段上的性能可能会更好
- 我们会更喜欢USB 3.0端口而不是USB 2.0
判决
如果你的预算略高，TP-Link Archer AX20（AX1800）是Archer AX10的不错升级。它比它便宜的兄弟快一点，尤其是在使用Wi-Fi 6时，它的硬件更强大一点，它可以处理更多的网络客户端。为了让事情变得更好，它包含一个USB 2.0端口和一个稍大的功能集。TP-Link Archer AX20价格合理，物超所值，我们向所有读者推荐。
使用Wi-Fi 6(Wi-Fi 6)拆箱TP-Link Archer AX20 ( AX1800 )
TP-Link Archer AX20无线路由器采用青色纸板箱包装，顶部有设备大图。您还可以看到这款路由器的主要功能以及它与新的Wi-Fi 6 标准(Wi-Fi 6 standard)兼容的事实。
TP-Link Archer AX20使用的包装
在盒子的侧面，您可以找到该路由器硬件配置的一个很好的总结，以及有关其功能的更多详细信息。当您打开包装盒时，您会看到快速安装指南(Quick Installation Guide)、故障排除指南（不幸的是，Wi-Fi 6 对与某些旧设备的兼容性很挑剔）以及有关此路由器固件的保修和许可证的详细信息。
TP-Link Archer AX20 拆箱
取出前面提到的传单并打开包装后，你会发现路由器本身、它的电源适配器和一根CAT 5e网线。
TP-Link Archer AX20 - 包装盒内的物品
拆箱是一种快速体验，您可以立即开始设置路由器。在此之前，请阅读快速安装和故障排除指南。您会发现它们很有用，尤其是在您不熟悉 Wi-Fi 6 设备的情况下。(The unboxing is a quick experience, and you can immediately start setting up your router. Before you do that, read the quick installation and the troubleshooting guides. You will find them useful, especially if you are not familiar with Wi-Fi 6 equipment.)
硬件规格和设计
TP-Link Archer AX20比(TP-Link Archer AX20)TP-Link Archer AX10稍贵一些，它有一个四核Broadcom BCM6755（运行频率为 1.5 GHz）片上系统( system-on-a-chip)( SoC ) 而不是三核，这意味着它应该能够处理同时连接到网络的更多客户端。它还带有 256 MB 的RAM和 16 MB 的固件闪存。
Archer AX20是一款由塑料材料制成的薄型路由器，具有经典外观，适用于大多数同类设备。一个不错的感觉是顶部的 X，它支持 802.11ax 标准，也称为 Wi-Fi 6。这款路由器的尺寸与Archer AX10相同：10.2 × 5.3 ×1.5 英寸或 260.2 × 135.0 ×宽度、深度和高度均为 38.6 毫米。
TP-Link Archer AX20上的天线
它看起来也与Archer AX10相同，除非您阅读底部的标签，否则您无法区分它们。它会告诉您您拥有的特定型号，并提供有关其默认 Wi-Fi 配置的详细信息。还有一些用于将其安装在墙上的孔，这对某些用户可能很有用。
TP-Link Archer AX20可以安装在墙上
TP-Link Archer AX20有四个外置天线，不可拆卸，但可以随意旋转。它是双频设备，2.4 GHz频段（使用Wi-Fi 6时）的总理论最大带宽为 574 (Wi-Fi 6)Mbps，5 GHz频段为1201 Mbps。它适用于所有现代无线标准，包括 Wi-Fi 4 (802.11n)、Wi-Fi 5 (802.11ac) 和Wi-Fi 6 (802.11ax)，并且支持WPA3无线加密。此外，使用2×2 MU-MIMO进行无线传输。
在TP-Link Archer AX20的背面，您可以找到四个 1 Gbps 以太网(Gbps Ethernet)端口、WAN端口（同样为 1 Gbps）、一个USB 2.0端口、电源(Power)按钮、电源(Power)插孔、重置(Reset)插孔、一个用于转动Wi-Fi打开和关闭，以及WPS 功能(WPS feature)。
TP-Link Archer AX20背面的端口
如果您想了解有关此无线路由器的更多信息，请访问此页面：TP-Link Archer AX20 规格(TP-Link Archer AX20 Specifications)。
设置和使用TP-Link Archer AX20 ( AX1800 ) 路由器
TP-Link Archer AX20 Wi-Fi 6路由器的设置可以通过计算机、使用网络浏览器或使用 TP-Link 的适用于 Android 和 iOS 的Tether应用(Android)程序来完成。(Tether app)基于浏览器的向导首先要求您设置管理员密码，选择您所在位置的时区，然后选择您使用的互联网连接类型。对于某些类型的 Internet 连接，您可能需要输入必要的连接详细信息。然后，您可以个性化无线设置。您可以选择分别配置每个无线频段（2.4 GHz和 5 GHz）或让它们使用相同的名称和密码。
TP-Link Archer AX20 - 个性化无线设置
然后，路由器会测试您的互联网连接是否正常以及是否可以使用。如果一切正常，建议您将固件升级到最新版本。您应该这样做以访问新功能、改进的 Wi-Fi 性能和稳定性。
TP-Link Archer AX20 - 升级固件
完成固件升级后，您会看到设置摘要，您可以登录路由器并更改其高级设置。您可以将TP-Link ID连接到您的本地管理员帐户，并从互联网上的任何地方远程控制您的路由器，无论是从网络浏览器还是使用移动Tether应用程序。
为 TP-Link Archer AX20(Archer AX20)添加 TP-Link ID
用户界面很容易理解，首先只显示与无线网络相关的基本设置。
TP-Link Archer AX20 - 基本无线设置
有关更多功能和配置选项，请转到高级(Advanced)部分。在那里，您可以找到此路由器的所有设置和高级功能。您可能想要打开的一项功能是固件自动更新，以便TP-Link Archer AX20自动处理所有内容，并获得最佳的安全性和性能。
TP-Link Archer AX20 - 高级设置
高级设置并不复杂，许多用户设置起来应该没有问题。但是，固件中没有可用的帮助文档，这对某些人来说可能是不利的。幸运的是，用户界面支持 20 多种语言，让每个人的生活更轻松。
适用于Android(Android)和 iOS的Tether移动应用程序对所有支持它的TP-Link路由器的工作方式相同。(TP-Link)该应用程序易于使用，并且可以访问您需要的基础知识，包括一些可能派上用场的远程故障排除工具。
Tether应用程序适用于TP -Link Archer AX20(TP-Link Archer AX20)
不幸的是，旧设备可能无法“看到” Wi-Fi 6网络。所有支持该标准的路由器都是这种情况。关键是更新计算机内网卡的驱动程序。如果这也不起作用，您始终可以将路由器设置为使用 Wi-Fi 5 标准而不是Wi-Fi 6。
如果您使用Wi-Fi 5和 Wi-Fi 6，TP-Link Archer AX20提供的无线网络速度很快，而在 2.4 GHz频段上使用(GHz)Wi-Fi 4标准时相对较慢。为了给您一个视角，以下是在同一台笔记本电脑上进行的无线传输的摘要，在同一个地方，在一个与路由器一墙之隔的房间里。在 2.4 GHz频段，使用Wi-Fi 4时，无线传输非常稳定，但平均速度并不理想：只有 98.4 Mbps。竞争路由器设法在同一个房间内达到 130 Mbps以上。(Mbps)
TP-Link Archer AX20 - 在Wi-Fi 4上传输(Wi-Fi 4)
在5 GHz频段切换到Wi-Fi 5时，平均速度要好很多，传输可变性也有所增加。但是，下载速度是 2.4 GHz(GHz)频段的六倍。
TP-Link Archer AX20 - 在Wi-Fi 5上传输(Wi-Fi 5)
在带有Wi-Fi 6的 5 GHz频段上，平均速度进一步提高，但传输的可变性也是如此。然而，672.6 Mbps的平均下载速度会让许多用户感到满意。
TP-Link Archer AX20 - 在Wi-Fi 6上传输(Wi-Fi 6)
使用具有更新的 Wi-Fi 5 和 Wi-Fi 6 标准的 TP-Link Archer AX20 AX18000 路由器，您将获得良好的体验。网络连接速度很快，路由器可以处理许多设备，您可以从互联网上的任何地方控制它，包括您的智能手机。唯一的缺点是使用 Wi-Fi 4 标准时的平均速度有点令人失望。(You get a good experience using the TP-Link Archer AX20 AX18000 router with the newer Wi-Fi 5 and Wi-Fi 6 standards. Network connections are fast, the router can handle many devices, and you can control it from anywhere on the internet, including your smartphone. The only downside is that the average speed when using the Wi-Fi 4 standard is a bit underwhelming.)
如果您想了解更多关于TP-Link Archer AX20提供的真实性能，包括与其他无线路由器的比较，请转到本评论的下一页。
TP-Link Archer AX20 review: Redefining value for money? -
ΤP-Link’s line-up of Wi-Fi 6 routers includes some exciting models with good hardwаre that are very reasоnably priced. If yoυ want a good mid-range model, you should look at the new TP-Link Archer AX20 or TP-Link WiFi 6 Router AX1800, as yоu find it on Amazоn. For a bit more money than Archer AX10, the Archer AX20 adds features and improvements that may рique your interest. Read this reνiew and see whether TP-Link Archer AX20 is a good chоice for you:
TP-Link Archer AX20: Who is it good for?
This wireless router is a suitable choice for:
- People who want a reasonably-priced Wi-Fi 6 router
- Three bedroom apartments or houses
- People who want to control their router from a mobile app
- Users who want to control their home network using the Alexa voice assistant
- People who want task automation services from their wireless router through IFTTT (If This, Then That)
Pros and cons
Here are the things we like about TP-Link Archer AX20:
See price on:
Buy now
- Good performance when using both Wi-Fi 6 and Wi-Fi 5
- Reasonably priced
- Solid hardware that can handle many network clients
- The firmware is easy to use and configure
- You can control it remotely with a mobile app
- Great multilingual support
- It has a USB port
There are a few downsides too:
- Performance could be better on the 2.4 GHz band
- We would have preferred a USB 3.0 port instead of USB 2.0
Verdict
If you have a slightly higher budget, TP-Link Archer AX20 (AX1800) is a good upgrade to Archer AX10. It is a bit faster than it’s cheaper brother, especially when using Wi-Fi 6, its hardware is a bit more powerful, and it can handle more network clients. To make things even better, it packs a USB 2.0 port, and a slightly larger feature-set. TP-Link Archer AX20 is a reasonably-priced choice that delivers excellent value for money, and we recommend it to all our readers.
Unboxing the TP-Link Archer AX20 (AX1800) with Wi-Fi 6
The TP-Link Archer AX20 wireless router comes in a cyan cardboard box, with a big picture of the device on the top. You also see this router’s top features and the fact that it works with the new Wi-Fi 6 standard.
The packaging used for TP-Link Archer AX20
On the sides of the box, you find a good summary of this router’s hardware configuration, as well as more details about its features. When you open the box, you see the Quick Installation Guide, a troubleshooting guide (unfortunately, Wi-Fi 6 is picky about compatibility with some older devices), and details about the warranty and the license used for this router’s firmware.
Unboxing the TP-Link Archer AX20
After you take out the leaflets mentioned earlier and unpack everything, you find the router itself, its power adapter, and a CAT 5e network cable.
TP-Link Archer AX20 - What you find inside the box
The unboxing is a quick experience, and you can immediately start setting up your router. Before you do that, read the quick installation and the troubleshooting guides. You will find them useful, especially if you are not familiar with Wi-Fi 6 equipment.
Hardware specifications and design
TP-Link Archer AX20 is slightly more expensive than TP-Link Archer AX10, and it has a four-core Broadcom BCM6755 (running at 1.5 GHz) system-on-a-chip (SoC) instead of a triple-core one, meaning that it should be able to handle more clients that are simultaneously connected to the network. It also comes with 256 MB of RAM and 16 MB of flash storage for the firmware.
Archer AX20 is a thin router made of plastic materials, with a classic look, typical for most devices of its type. A nice touch is the X on the top, coming from its support for the 802.11ax standard, also known as Wi-Fi 6. The size of this router is identical to Archer AX10: 10.2 × 5.3 ×1.5 inches or 260.2 × 135.0 × 38.6 mm in width, depth, and height.
The antennas on the TP-Link Archer AX20
It also looks the same as Archer AX10, and you couldn’t tell them apart unless you read the sticker on the bottom. It tells you the specific model you own and gives details about its default Wi-Fi configuration. There are also holes for mounting it on walls, which can be useful to some users.
TP-Link Archer AX20 can be mounted on walls
TP-Link Archer AX20 has four external antennas, that are non-detachable but can be rotated as you wish. It is a dual-band device with a total theoretical maximum bandwidth of 574 Mbps for the 2.4 GHz band (when using Wi-Fi 6) and 1201 Mbps for the 5 GHz band. It works with all the modern wireless standards, including Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac), and Wi-Fi 6 (802.11ax), and it has support for WPA3 wireless encryption. Also, wireless transfers are made using 2×2 MU-MIMO.
On the back of TP-Link Archer AX20, you find four 1 Gbps Ethernet ports, the WAN port (also at 1 Gbps), a USB 2.0 port, the Power button, the Power jack, the Reset jack, a button for turning the Wi-Fi on and off, and the WPS feature.
The ports on the back of the TP-Link Archer AX20
If you would like to learn more about this wireless router, go to this page: TP-Link Archer AX20 Specifications.
Setting up and using the TP-Link Archer AX20 (AX1800) router
Setting up the TP-Link Archer AX20 Wi-Fi 6 router can be done both from a computer, using a web browser, or using TP-Link’s Tether app for Android and iOS. The browser-based wizard first asks you to set up the administrator password, select the time-zone for your location, and choose the type of internet connection you are using. For some types of internet connections, you may need to enter the necessary connection details. Then, you get to personalize the wireless settings. You can choose to configure each wireless band (2.4 GHz and 5 GHz) separately or have them use the same name and password.
TP-Link Archer AX20 - personalize wireless settings
Then, the router tests whether your internet connection works and if it can use it. If all is good, it recommends that you upgrade the firmware to the latest version. You should do that to get access to new features, improved Wi-Fi performance, and stability.
TP-Link Archer AX20 - upgrade firmware
When done with the firmware upgrade, you see a summary of your settings, and you can log into the router and change its advanced settings. You can connect a TP-Link ID to your local admin account and remote control your router from anywhere on the internet, both from a web browser and using the mobile Tether app.
Add a TP-Link ID to TP-Link Archer AX20
The user interface is simple to understand, and it starts with presenting only the basic settings related to the wireless network.
TP-Link Archer AX20 - basic wireless settings
For more features and configuration options, go to the Advanced section. There, you find all the settings and advanced features of this router. One feature that you may want to turn on is the firmware auto-update, so that TP-Link Archer AX20 handles everything automatically, and you get the best possible security and performance.
TP-Link Archer AX20 - Advanced settings
The advanced settings are not that complex, and many users should have no problems setting things up. However, there’s no help documentation available in the firmware, which may be a downside for some people. Luckily, the user interface is available in more than 20 languages, making everyone’s life easier.
The Tether mobile app for Android and iOS works the same way for all TP-Link routers that support it. The app is easy to use, and it offers access to the basics you need, including some remote troubleshooting tools that might come in handy.
The Tether app works with TP-Link Archer AX20
Unfortunately, older devices may not be able to “see” Wi-Fi 6 networks. This is the case with all routers with support for this standard. The key is to update the drivers for the network cards inside your computers. If that doesn’t work either, you can always set the router to use the Wi-Fi 5 standard instead of Wi-Fi 6.
The wireless network offered by TP-Link Archer AX20 is fast if you are using Wi-Fi 5 and Wi-Fi 6 and relatively slow when using the Wi-Fi 4 standard on the 2.4 GHz band. To give you a perspective, here are the summaries of wireless transfers made on the same laptop, in the same place, in a room that was separated by one wall from the router. On the 2.4 GHz band, with Wi-Fi 4, the wireless transmission was very stable, but the average speed was underwhelming: just 98.4 Mbps. Competing routers managed to go above 130 Mbps in the same room.
TP-Link Archer AX20 - transfer on Wi-Fi 4
When switching to Wi-Fi 5 on the 5 GHz band, the average speed was a lot better, and the transmission variability also increased. However, downloads were six times faster than on the 2.4 GHz band.
TP-Link Archer AX20 - transfer on Wi-Fi 5
On the 5 GHz band with Wi-Fi 6, the average speed increased further, but so did the variability of the transmission. However, 672.6 Mbps is an average download speed that is going to make many users happy.
TP-Link Archer AX20 - transfer on Wi-Fi 6
You get a good experience using the TP-Link Archer AX20 AX18000 router with the newer Wi-Fi 5 and Wi-Fi 6 standards. Network connections are fast, the router can handle many devices, and you can control it from anywhere on the internet, including your smartphone. The only downside is that the average speed when using the Wi-Fi 4 standard is a bit underwhelming.
If you want to know more about the real-world performance offered by TP-Link Archer AX20, including comparisons with other wireless routers, go to the next page of this review.
