如果Microsoft Update或Windows Update在^{(Windows Update)}Windows 11/10/8/7中一遍又一遍地提供或安装相同的更新，那么这篇文章建议您可以尝试解决问题的一些方法。

如果某些更新未正确安装，并且您的Windows操作系统无法检测到已安装或部分安装的更新，通常会发生这种情况。在这种情况下，感觉您的系统需要更新，因此会一遍又一遍地安装它。

Windows 11/10 不断安装相同的更新

1]卸载更新^(Update)，然后重新安装

您应该做的第一件事是尝试记下不断安装的更新的数量。它将类似于KB1234567。

现在右键单击开始^(Start)以打开WinX 菜单^{(WinX Menu)}。选择控制面板^{(Select Control Panel)}，然后打开程序^(Programs)和功能^(Features)小程序。在这里单击已安装的^(Installed) 更新^(Updates)以查看Windows 更新^{(Windows Update)}历史记录。

现在按数字搜索更新^(Update)，右键单击它选择卸载^(Uninstall)。它可能会或可能不会显示失败^(Failed)状态。

现在重新启动计算机，运行Windows 更新^{(Windows Update)}并重新安装。

看看有没有帮助。^{(See if it helps.)}

2]运行Windows^{(Run Windows)}更新疑难解答^{(Troubleshooter)}

您可能还想运行Windows 更新疑难解答，看看它是否对您有帮助。

3]清除SoftwareDistribution文件夹

如果这些都没有帮助，删除SoftwareDistribution 文件夹^{(SoftwareDistribution folder)}的内容可能会对您有所帮助。Windows操作系统中的Software Distribution文件夹是位于Windows目录中的文件夹，用于临时存储在您的计算机上安装Windows 更新^{(Windows Update)}可能需要的文件。

这篇文章将向您展示如何删除 Software Distribution 文件夹的内容^{(delete the contents of the Software Distribution folder)}。

众所周知，刷新此文件夹有助于解决多个问题，例如Windows Update 安装失败^{(Windows Update fail to install)}、  Windows Update 无法工作^{(Windows Update not working)}、 配置 Windows 更新失败、Windows Update 卡住下载更新^{(Windows Update stuck downloading updates)}、我们无法完成更新^{(We couldn’t complete the updates)}等等。如果Windows Update 继续提供驱动程序更新，请参阅此帖子。

此数据存储还包含您的 Windows更新历史记录^{(Update History)}文件。如果您删除它们，您将丢失更新^(Update)历史记录。而且，下次运行Windows Update时，会导致检测时间变长。

4]重置Catroot文件夹

重置 Catroot 文件夹^{(Reset the Catroot folder)}并查看。要重置 catroot2 文件夹，请执行以下操作：

打开提升的命令提示符^{(Command Prompt)}，依次键入以下命令并按 Enter：

net stop cryptsvc

md %systemroot%\system32\catroot2.old

xcopy %systemroot%\system32\catroot2 %systemroot%\system32\catroot2.old /s

接下来，删除 catroot2 文件夹的所有内容。

完成此操作后，在CMD窗口中，键入以下内容并按 Enter：

net start cryptsvc

一旦您再次启动Windows 更新^{(Windows Update)}，您的 catroot 文件夹将被重置。

5]清除pending.xml文件

打开提升的命令提示符窗口，键入以下内容并按 Enter：

Ren c:\windows\winsxs\pending.xml pending.old

这会将pending.xml 文件重命名为pending.old。现在再试一次。

6]清除BITS队列

清除所有当前作业的BITS队列。为此，请在提升的CMD中键入以下内容并按Enter：

bitsadmin.exe /reset /allusers

现在重新启动计算机并运行Windows Update并安装可用的更新。

让我们知道这些建议是否对您有所帮助。^{(Let us know if any of these suggestions helped you.)}

Windows keeps offering or installing the same Update

If Microsoft Uрdate or Windows Update keeps offering or installing the same update over and over in Windows 11/10/8/7, then this post suggests а few things you coυld try to fix the issue.

This usually happens if some update has not been installed properly, and your Windows operating system is unable to detect the installed or partially installed update. In this scenario, it feels that your system requires the update and so keeps installing it over and over again.

Windows 11/10 keeps installing the same update

1] Uninstall the Update and then install it again

The first thing you should do is try to note down the number of the update that keeps installing. It will be something like KB1234567.

Now right-click on the Start to open the WinX Menu. Select Control Panel, and then open the Programs & Features applet. Here click on Installed Updates to see the Windows Update history.

Now search for the Update by number, right-click on it select Uninstall. It may or may not show a Failed status.

Now restart your computer run Windows Update and install it afresh.

See if it helps.

2] Run Windows Updates Troubleshooter

You might also want to run Windows Updates Troubleshooter and see if it helps you.

3] Clear SoftwareDistribution folder

If none of this helps, deleting the contents of the SoftwareDistribution folder is likely to help you. The Software Distribution folder in Windows operating system is a folder located in the Windows directory and used to temporarily store files which may be required to install Windows Update on your computer.

This post will show you how to delete the contents of the Software Distribution folder.

Flushing this folder has been known to help fix several issues like Windows Update fail to install, Windows Update not working, Failure configuring Windows updates, Windows Update stuck downloading updates, We couldn’t complete the updates, and so on. See this post if Driver update keeps being offered by Windows Update.

This data store also contains your Windows Update History files. If you delete them you will lose your Update history. Moreover, the next time you run Windows Update, it will result in a longer detection time.

4] Reset the Catroot folder

Reset the Catroot folder and see. To reset the catroot2 folder do this:

Open an elevated Command Prompt, type the following command one after the other and hit Enter:

net stop cryptsvc

md %systemroot%\system32\catroot2.old

xcopy %systemroot%\system32\catroot2 %systemroot%\system32\catroot2.old /s

Next, delete all the contents of the catroot2 folder.

Having done this, in the CMD windows, type the following and hit Enter:

net start cryptsvc

Your catroot folder will be reset, once you start Windows Update again.

5] Clear pending.xml file

Open an elevated command prompt window, type the following and hit Enter:

Ren c:\windows\winsxs\pending.xml pending.old

This will rename pending.xml file to pending.old. Now try again.

6] Clear the BITS queue

Clear the BITS queue of any current jobs. To do this, type the following in an elevated CMD and hit Enter:

bitsadmin.exe /reset /allusers

Now restart your computer and run Windows Update and install the available updates.

Let us know if any of these suggestions helped you.

Related posts

• Fix Windows Update error 0x80070422在Windows 10上

• Windows 10上的Fix Windows Update error 0x8e5e03fa

• Fix的Windows 10 Update Error 0x800703F1

• New特征Windows 10 version 20H2 October 2020 Update

• Windows Update page上的Fix问题按钮

• Windows 10上的Windows Update error 80072EFE

• Fix Windows Update Error 0x800703ee

• Fix Windows 10 Update error code 0x80d02002

• 如何重置Windows 11/10 Windows Update组件

• 无法使用error code 0x8024200D安装Windows Update

• Windows 10 Update Servicing Cadence解释说明

• Fix Windows Update Error 0x80070005

• 如何使用WAU Manager管理或停止Windows 10 Update

• 如何Fix Windows Update Error 0xc1900201

• 如何修复Windows Update Error Code 0x8024402c

• Fix Windows Update Error C8000266？

• Windows Update Error 0X800B0101，Installer遇到了错误

• Fix Windows Update Error 0x800f0989在Windows 11/10上

• Fix Windows Update Error 0x800f0905

• Windows Update未能安装或不会在Windows 11/10下载