安全模式^(Mode)是解决Windows问题的最佳方法之一。如果安装特定更新可以解决您的问题，并且您无法在正常模式下执行此操作，那么您应该在安全模式下安装^{(Safe Mode.)}Windows 更新。^{(Windows Updates)}如果更新导致问题，您还可以选择在安全模式下卸载更新。^{(Safe Mode)}

您应该在安全模式下安装^{(Safe Mode)}Windows 更新^{(Windows Updates)}吗？

简单的答案是否定的。但微软^(Microsoft)建议您仅在无法正常启动Windows时才这样做。不推荐的原因是在安全模式下^{(Safe Mode)}，特定的驱动程序和组件不可用。因此，如果Windows Update需要更新特定的服务或组件，但由于它被禁用而无法找到它，它就不会更新它。重新启动时，您可能会遇到一些与间歇性文件错误或注册表错误相关的错误。Windows可能会抛出错误消息：

ERROR_INSTALL_SERVICE_FAILURE
1601 The Windows Installer service could not be accessed.
Contact your support personnel to verify that the Windows
Installer service is properly registered

如何在安全模式下安装^{(Safe Mode)}Windows 更新^{(Windows Updates)}

由于我们需要在安全模式下进行网络连接或 Internet 访问，因此我们需要确保使用安全模式^{(Safe Mode)}启用网络。您可以通过多种方式将 Windows 10 引导至安全模式^{(boot Windows 10 into Safe Mode)}。

1]使用恢复方法

• 打开Windows 设置^{(Windows Settings)}并导航到Update > Recovery。
• 单击^(Click)高级启动^{(Advanced Startup)}下的立即重新启动^(Restart)按钮以启动进入高级恢复^(Recovery)模式。
• 现在转到Troubleshoot > Advanced Options > Startup Settings。
• 单击重新启动按钮
• 然后它将带您进入启动设置^{(Startup Settings)}，其中第五个选项是启用带网络连接的安全模式。
• 按 F5 启动它。

提示：^(Tip:)如果在从菜单重新启动计算机时按住 Shift^(Shift)键，它将直接引导您进入高级启动选项。^{(boot you into the Advanced Startup option.)}

2]使用MSCONFIG

• 打开运行提示^{(Run Prompt)}( WIN + R ) 并键入“ msconfig ”，然后按Enter键
• 切换到  引导^(Boot)部分，然后在引导选项下，选中“^(Boot)安全模式^{(Safe Mode)}”旁边的框。
• 然后从单选按钮选项中选择网络。^(Network)
• 单击应用^{(Click Apply)}，然后重新启动计算机。

进入安全模式^{(Safe Mode)}后，转到Settings > Update和安全^(Security)并运行Windows 更新^{(Windows Update)}。安装可用的更新。

微软^(Microsoft)建议，如果您在Windows以安全模式^{(Safe Mode)}运行时安装更新，请在正常启动 Windows 10 后立即重新安装。^{(immediately reinstall it)}如果更新未再次列出，您可能必须遵循手动方法。重新安装将确保消除在安全模式^(Mode)期间出现的任何错误。

您可以在安全模式下卸载^{(Safe Mode)}Windows 更新^{(Windows Updates)}吗？

您还可以选择以相同方式删除更新^(Updates)、服务包^{(Service Packs)}和修补程序^(Hotfixes)。但是，与安装新更新不同，您不会遇到任何问题。您不会收到任何错误的原因是它会记录更改的内容，并在计算机正常启动时应用它。在安装更新期间不会发生同样的情况，因为系统将假定组件丢失。

下载^(Download)离线Windows 更新^{(Windows Updates)}并以安全模式安装^{(Safe Mode)}

如果您无法访问互联网，还有另一种方法可以在安全模式下安装更新。^{(Safe Mode)}它类似于您在离线模式下更新 Windows 的方式。您必须弄清楚应该安装哪些更新，然后使用该应用程序进行下载。

如果您更喜欢直接从微软网站下载^{(download them directly from Microsoft’s website)}，您可以使用更新的 KB 号进行搜索并下载。

我希望该指南易于理解，并且您能够以安全模式安装^{(Safe Mode)}Windows 更新^{(Windows Updates)}。

Can you install Windows Updates in Safe Mode in Windows 11/10?

Safe Mode іs one of the best ways to troubleshоot problems in Windows. If installіng a particular update сan fix your problem, and you cannot do it in normal mode, then you should install Windows Updates in Safe Mode. You can also choose to uninstall an update in Safe Mode if it is causing an issue.

Should you install Windows Updates in Safe Mode?

The simple answer is No. But Microsoft recommends you to do it only when you cannot start Windows normally. The reason why it is not recommended is that in Safe Mode, specific drivers and components are unavailable. So if Windows Update needs to update a particular service or a component, and it is not able to find it, because it’s disabled, it will not update it. When you restart, you may experience some errors related to intermittent file errors or registry errors. Windows may throw an error saying:

ERROR_INSTALL_SERVICE_FAILURE
1601 The Windows Installer service could not be accessed.
Contact your support personnel to verify that the Windows
Installer service is properly registered

How to install Windows Updates in Safe Mode

Since we need to have a network connection or internet access in Safe Mode, we need to make sure networking is enabled with Safe Mode. You can boot Windows 10 into Safe Mode in multiple ways.

1] Using Recovery Method

• Open Windows Settings and navigate to Update > Recovery.
• Click on Restart Now button under Advanced Startup to boot into Advanced Recovery mode.
• Now go to Troubleshoot > Advanced Options > Startup Settings.
• Click on the Restart button
• It will then bring you to the Startup Settings, where the fifth option is to Enable Safe Mode with Networking.
• Press F5 to boot into it.

Tip: If you hold down the Shift key when restarting the computer from the menu, it will directly boot you into the Advanced Startup option.

2] Using MSCONFIG

• Open Run Prompt (WIN + R) and type “msconfig” followed by pressing the Enter key
• Switch to  Boot section, and under the Boot options, check  the box next to “Safe Mode.”
• Then select Network from the radio button options.
• Click Apply, and then reboot the computer.

Once in Safe Mode, Go to Settings > Update & Security and run Windows Update. Install the available updates.

Microsoft recommends that if you install an update while Windows is running in Safe Mode, immediately reinstall it after you start Windows 10 normally. You may have to follow the manual method if the updates are not listed again. The reinstallation will make sure to iron out any bugs which appeared during Safe Mode.

Can you uninstall Windows Updates in Safe Mode?

You can also choose to remove Updates, Service Packs, and Hotfixes in the same way. However, you will not face any issues, unlike installing new updates. The reason you will not receive any error is that it will make a record of what has changed, and apply it when the computer boots normally. The same doesn’t happen during the installation of an update as the system will assume the components to be missing.

Download offline Windows Updates & install in Safe Mode

There is another way to install updates in Safe Mode if you do not have access to the internet. It is similar to how you update Windows in offline mode. You will have to figure out which updates should be installed and then use the application to download.

If you prefer to download them directly from Microsoft’s website, you can search using the KB number of the update and download.

I hope the guide was easy to follow, and you were able to install Windows Updates in Safe Mode.

Related posts

• 如何在Windows 10 Safe Mode中Install & Uninstall programs

• 如何在Windows 10执行Clean Boot

• PC stuck在Windows 11/10中无法退出Safe Mode

• 如何在Windows 10中直接重启安全Mode

• Turn关闭memory integrity protection继续更新Windows 10

• 我应该在Windows 10安装Optional Quality Updates吗？

• Windows Update在Windows 10中自动禁用自己

• 如何在Windows 11/10启用Developer Mode

• 如何在 Windows 10 的启动菜单中添加安全模式

• 免费工具到Block Automatic Windows 10更新

• 如何在Windows 10中安装Driver and Optional Updates

• Improve performance在Windows 10 Task Manager中使用Eco Mode

• UNEXPECTED_KERNEL_MODE_TRAP error在Windows 11/10

• 5 Ways以Safe Mode启动您的电脑

• 如何在Windows 10检查更新

• 如何下载Windows Updates手动离线Windows 11/10

• 如何在Windows 11/10上追踪WorkGroup Mode的User Activity

• Windows 10中Windows Updates后Blue Screen

• 如何启动Windows 10在安全Mode

• Windows 11/10 Reset Windows Update Agent默认为默认情况下