如果您的USB设备遇到问题或收到类似“无法识别^(USB)USB 设备^(Device)”的错误消息，您需要解决此问题以解决根本原因。第一步是打开设备管理器^{(Device Manager)}，展开通用串行总线^{(Universal Serial Bus)}控制器，然后右键单击您遇到上述错误的设备（或设备将带有黄色感叹号）并选择属性。

在设备^(Device)状态下的属性窗口中，您将看到错误消息“ Windows已停止此设备，因为它报告了问题（代码 43^{(Code 43)}）”。这是您需要修复以使USB设备再次工作的根本原因。错误代码 43 表示设备管理器已停止USB设备，该设备已向Windows报告了一些问题。

此错误消息的主要原因是驱动程序问题，因为控制USB设备的^(USB)USB驱动程序之一已通知Windows该设备以某种方式出现故障，因此Windows需要停止它。因此，不要浪费任何时间，让我们看看如何修复 Windows^{(Fix Windows)}已停止此设备，因为它在下面列出的故障排除指南的帮助下报告了问题（代码 43 ）。^{(Code 43)}

修复 Windows^{(Fix Windows)}已停止此设备，因为它报告了问题（代码 43^{(Code 43)}）

注意：^(Note:)确保 创建一个还原点^{(create a restore point)} 以防万一出现问题。

在继续之前，您应该尝试一些简单的修复，例如重新启动^(Restart)PC、拔下并插入设备、使用另一个USB端口、拔下所有其他USB设备、重新启动 PC 并尝试导致问题的设备。还有一件事，检查您的USB设备是否在另一台计算机上工作，如果不能，则表示USB设备已损坏，您无能为力，只能更换新设备。

方法 1：卸载 USB 驱动程序^{(Method 1: Uninstall USB Drivers)}

1. 按 Windows 键 + R 然后输入devmgmt.msc 并单击OK打开设备管理器。

2. 在设备管理器中，展开通用串行总线控制器。^{(Universal Serial Bus controllers.)}

3.插入您的USB设备，它会显示错误消息“ Windows 已停止此设备，因为它报告了问题（代码 43）^{(Windows has stopped this device because it has reported problems (Code 43))} ”。

4. 您将在通用串行总线^{(Universal Serial Bus)}控制器下看到一个带有黄色感叹号的未知 USB 设备。^{(Unknown USB device)}

5. 现在右键单击它并单击卸载。^(Uninstall.)

6. 重启电脑，Windows会自动安装默认驱动。

7. 如果问题仍然存在，请对通用串行总线控制器下的每个设备重复上述步骤。^{(Universal Serial Bus controllers.)}

方法 2：更新 USB 驱动程序^{(Method 2: Update USB Drivers)}

1. 按 Windows 键 + R 然后输入devmgmt.msc 并按Enter打开设备管理器^{(Device Manager)}。

2. 单击Action > Scan for hardware changes.

3. 右键单击​​有问题的USB（应标有黄色感叹号）^{(Problematic USB (should be marked with Yellow exclamation) )}，然后右键单击并单击“更新驱动程序^{(Update Driver)}”。

4.让它自动从互联网上搜索驱动程序。

5.重新启动您的PC，看看问题是否已解决。

6. 如果您仍然面临Windows无法识别的USB设备，请对^(USB)Universal Bus Controllers中存在的所有项目执行上述步骤。

7. 在设备管理器^{(Device Manager)}中，右键单击USB Root Hub，然后单击属性^(Properties)并切换到电源管理^{(Power Management)}选项卡，然后取消选中^(uncheck)“允许计算机关闭此设备以节省电源^{(Allow the computer to turn off this device to save power)}”。

方法 3：禁用 USB 选择性暂停设置^{(Method 3: Disable USB Selective Suspend Settings)}

1. 按 Windows 键 + R 然后输入powercfg.cpl 并按回车键打开电源选项^{(Power Options)}。

2.接下来，在您当前选择的电源计划上单击更改计划设置。^{(Change plan settings)}

3. 现在单击更改高级电源设置。^{( Change advanced power settings.)}

4. 导航到USB设置并展开它，然后展开 USB 选择性暂停设置。^{(expand USB selective suspend settings.)}

5.禁用 ^(Disable )电池和插入^{( On battery and Plugged in)}设置。

6. 单击应用，然后单击确定^(OK)，然后重新启动您的 PC。

方法 4：禁用快速启动^{(Method 4: Disable Fast Startup)}

1. 按 Windows 键 + R 然后输入powercfg.cpl 并按回车键打开电源选项^{(Power Options)}。

2. 单击 左侧菜单中的选择电源按钮的功能。^{(Choose what the power buttons do)}

3. 接下来，单击更改当前不可用的设置。^{( Change settings that are currently unavailable.)}

4.在关机设置下取消勾选“开启快速启动” 。^{(Uncheck “Turn on fast startup”)}

5. 现在单击保存更改^{(Save changes)}并重新启动您的 PC。

方法 5：运行 Microsoft Windows USB 疑难解答^{(Method 5: Run Microsoft Windows USB Troubleshooter)}

Microsoft已发布Fix It 解决方案，用于解决Windows 10上与^{(Windows 10)}USB相关的问题。Windows USB 疑难解答^{(Windows USB Troubleshooter)}修复了以下问题：

• 无法识别您的USB类过滤器。^(USB)
• 无法识别您的 USB 设备。
• USB打印机设备未打印。
• USB存储设备无法弹出。
• Windows Update配置为从不更新驱动程序。

1. 打开您的网络浏览器并导航到此 URL^{(navigate to this URL)}。

2. 页面加载完成后，向下滚动并单击下载。^(Download.)

3. 下载文件后，双击文件打开Windows USB 疑难解答。^{(Windows USB troubleshooter.)}

4. 单击 下一步^( Next)并运行Windows USB 疑难解答^{(Windows USB Troubleshooter)}。

5. 如果您有任何连接的设备，USB 疑难解答^{(USB Troubleshooter)}将要求您确认弹出它们。

6. 检查连接到 PC 的USB设备，然后单击下一步。^{( Next.)}

7. 如果发现问题，单击应用此修复程序。^{(Apply this fix.)}

8. 重新启动您的 PC 以保存更改。

受到推崇的：^{(Recommended:)}

• 修复 HP 触摸板在 Windows 10 中不起作用^{(Fix HP Touchpad Not Working in Windows 10)}
• 如何从 Word 文档 2019 [指南] 中提取图像
• 在没有媒体创建工具的情况下下载官方 Windows 10 ISO^{(Download official Windows 10 ISO without Media Creation Tool)}
• 以太网在 Windows 10 中不工作 [已解决]^{(Ethernet Not Working in Windows 10 [SOLVED])}

就是这样，您已成功修复 Windows 已停止此设备，因为它报告了问题（代码 43）^{(Fix Windows has stopped this device because it has reported problems (Code 43))}，但如果您对这篇文章仍有任何疑问，请随时在评论部分询问他们。

Fix Windows has stopped this device because it has reported problems (Code 43)

If you’re facing issues with your USB device or getting аn еrror messаgе like this “USB Device not Recognized”, yоu need to troubleshoоt this issuе to fix the underlying cause. The firѕt step would be to оpen Devіce Manager, expand Universal Serial Bus cоntrollers, then right-click on your dеvice fоr which you’re facing the above error (or the device will have a yellow exclamation mark) and select Properties.

In the properties window under Device status, you will see the error message “Windows has stopped this device because it has reported problems (Code 43)”. This is the underlying cause which you need to fix for the USB device to work again. The error code 43 means that the device manager has stopped the USB device the device has reported some problem to the Windows.

The main cause for this error message is driver issues because one of the USB drivers controlling the USB device has notified Windows that the device failed in some manner and therefore, Windows needs to stop it. So without wasting any time let’s see How to Fix Windows has stopped this device because it has reported problems (Code 43) with the help of the below-listed troubleshooting guide.

Fix Windows has stopped this device because it has reported problems (Code 43)

Note: Make sure to create a restore point just in case something goes wrong.

Before continuing, you should try some simple fixes such as Restart your PC, unplug & plug-in the device, use another USB port, unplug all the other USB devices, restart your PC and try the device which was causing the issue. One more thing, check if your USB device work in another computer, if it doesn’t then this means that the USB device is damaged and there is nothing you could do, except replacing the device with a new one.

Method 1: Uninstall USB Drivers

1. Press Windows Key + R then type devmgmt.msc and click OK to open Device Manager.

2. In device Manager, expand Universal Serial Bus controllers.

3.Plug in your USB device, which shows you the error message “Windows has stopped this device because it has reported problems (Code 43)“.

4. You will see an Unknown USB device with a yellow exclamation mark under Universal Serial Bus controllers.

5. Now right-click on it and click Uninstall.

6. Restart your PC, and the default drivers will be automatically installed by Windows.

7. Again if the issue persists repeat the above steps for each device under Universal Serial Bus controllers.

Method 2: Update USB Drivers

1. Press Windows Key + R then type devmgmt.msc and hit Enter to open Device Manager.

2. Click on Action > Scan for hardware changes.

3. Right-click on the Problematic USB (should be marked with Yellow exclamation) then right-click and click “Update Driver“.

4. Let it searches for drivers automatically from the internet.

5. Restart your PC and see if the issue is resolved or not.

6. If you are still facing USB device not recognized by Windows, then do the above step for all the items present in Universal Bus Controllers.

7. From the Device Manager, right-click on the USB Root Hub then click Properties and switch to the Power Management tab then uncheck “Allow the computer to turn off this device to save power.”

Method 3: Disable USB Selective Suspend Settings

1. Press Windows Key + R then type powercfg.cpl and hit enter to open Power Options.

2. Next, click on Change plan settings on your currently selected power plan.

3. Now click Change advanced power settings.

4. Navigate to USB settings and expand it, then expand USB selective suspend settings.

5. Disable both On battery and Plugged in settings.

6. Click Apply, followed by OK then Restart your PC.

Method 4: Disable Fast Startup

1. Press Windows Key + R then type powercfg.cpl and hit enter to open Power Options.

2. Click on Choose what the power buttons do from the left-hand menu.

3. Next, click on Change settings that are currently unavailable.

4. Uncheck “Turn on fast startup” under Shutdown settings.

5. Now click Save changes and Restart your PC.

Method 5: Run Microsoft Windows USB Troubleshooter

Microsoft has released a Fix It solution to troubleshoot USB related issues on Windows 10. The Windows USB Troubleshooter fixes the following issues:

• Your USB class filter was not recognized.
• Your USB device is not recognized.
• The USB printer device is not printing.
• The USB storage device cannot be ejected.
• Windows Update is configured never to update drivers.

1. Open your web browser and navigate to this URL.

2. When the page has finished loading, scroll down and click Download.

3. Once the file is downloaded, double-click the file to open the Windows USB troubleshooter.

4. Click Next and let Windows USB Troubleshooter run.

5. If you have any attached devices, then USB Troubleshooter will ask for confirmation to eject them.

6. Check the USB device connected to your PC and click Next.

7. If the problem is found, click on Apply this fix.

8. Restart your PC to save changes.

Recommended:

• Fix HP Touchpad Not Working in Windows 10
• How to Extract Images from Word Document 2019 [GUIDE]
• Download official Windows 10 ISO without Media Creation Tool
• Ethernet Not Working in Windows 10 [SOLVED]

That’s it you have successfully Fix Windows has stopped this device because it has reported problems (Code 43) but if you still have any queries regarding this post then feel free to ask them in the comment’s section.

Related posts

• 8 Ways至Fix Error Code 43在Windows 10上

• 如何修复 Windows 中的“Windows 已停止此设备”代码 43 错误

• Fix Windows无法与device or resource通信

• Fix Windows无法完成格式

• Fix Windows Update Error Code 0x80072efe

• Device Manager中的Fix Network Adapter Error Code 31

• Fix Windows已检测到IP address冲突

• Fix DVD/CD Rom Error Code 19在Windows 10上

• 修复 Zoom 无法连接错误代码 5003

• Fix Windows Store Error Code 0x80240437

• Fix系统找不到指定的文件Error Code 0x80070002

• Fix Error Code 0x80004005：Windows 10中未指定的错误

• Fix Windows 10 Store Error Code 0x80072efd

• 修复 Windows 10 中的 Valorant Val 43 错误

• 修复 Windows 10 中的 Steam 错误代码 e502 l3

• Fix Windows缺少network connectivity所需的套接字注册表条目

• Fix USB不工作Error Code 39

• Fix Windows无法安装Required Files 0x80070570

• 如何Fix PC Won125 POST

• Fix Destiny 2 Error Code Broccoli