许多任务是通过Windows 10中的命令提示符^{(Command Prompt)}和Powershell执行的，包括 Internet 设置管理。在本文中，我将向您展示如何在Windows 10中使用^{(Windows 10)}命令提示符^{(Command Prompt)}或Powershell禁用^(Powershell)WiFi连接。

在 Windows 10 中，有一个内置的netsh工具，它基本上是一个命令行实用程序，用于管理您的网络连接及其配置。使用它，您可以禁用、启用、连接^{(disable, enable, connect,)}或断开^(disconnect) WiFi和以太网连接，并执行更多操作。让我们看看在Windows 10中禁用^{(Windows 10)}WiFi连接需要什么命令。

如何使用CMD或Powershell禁用^(Powershell)WiFi

以下是使用命令提示符^{(Command Prompt)}或Powershell禁用^(Powershell)WiFi所需的步骤：

使用命令提示符

首先，打开Windows 10的^{(Windows 10)}Search选项并搜索Command Prompt。然后，转到命令提示符^{(Command Prompt)}应用程序并单击以管理员身份运行^{(Run as Administrator)}选项以管理员权限打开CMD 。

在输入禁用WiFi^(WiFi)的命令之前，您必须知道要禁用的无线接口的正确名称。因此，首先，输入以下命令来查看网络接口的名称：

netsh wlan show interfaces

现在，键入以下用于在Windows 10中禁用^{(Windows 10)}WiFi的命令：

netsh interface set interface name="WirelessNetworkName" admin=DISABLED

替换WirelessNetworkName为您的无线接口的名称（例如，请参见下面的屏幕截图）。

输入命令后，回车^(Enter)运行；它将在您的 PC 上禁用WiFi 。

如果您想切换WiFi设置，您必须了解以下一些其他命令：

要再次启用^(enable) WiFi连接，请输入命令：

netsh interface set interface name="WiFiNetworkName" admin=ENABLED

如果你想简单地断开^(disconnect)WiFi，可以使用这个命令：

netsh wlan disconnect

要连接^(connect)到特定的WiFi连接，您可以输入以下命令：

netsh wlan connect name="WiFiNetworkName"

使用 Powershell

在Windows 10上搜索Powershell并以管理员权限打开它，如下面的屏幕截图所示。

现在，要识别要禁用的正确适配器名称，在Powershell中使用以下命令：

Get-NetAdapter | format-table

之后，键入以下命令并按Enter以快速禁用您的 WiFi：

Disable-NetAdapter -Name "Adapter-Name" -Confirm:$false

如果您想再次启用WiFi ，只需在^(WiFi)Powershell中输入以下命令：

Enable-NetAdapter -Name "Adapter-Name" -Confirm:$false

因此，您可以使用命令提示符^{(Command Prompt)}或Powershell应用程序在^(Powershell)Windows 10中轻松禁用或启用WiFi连接。只需^(Just)输入禁用命令，它将关闭您计算机上的WiFi连接。

如果您想重新启用WiFi，您可以输入另一个用于启用WiFi连接的命令，如上文所述。

阅读下一篇^{(Read next)}：如何禁用后台 WiFi 扫描^{(How to disable background WiFi scanning)}。

How to disable WiFi using CMD or Powershell in Windows 10

A lot of tasks are executed through Command Prompt and Powershell in Windows 10 including internet settings management. In this article, I am going to show you how to disable WiFi connection using Command Prompt or Powershell in Windows 10.

In Windows 10, there is an inbuilt netsh tool which is basically a command-line utility to manage your network connections and their configurations. Using it, you can disable, enable, connect, or disconnect WiFi and ethernet connections and do a lot more. Let’s check out what command it needs to disable WiFi connection in Windows 10.

How to disable WiFi using CMD or Powershell

Here are the steps you need to disable WiFi using either Command Prompt or Powershell:

Using Command Prompt

Firstly, open the Search option of Windows 10 and search for Command Prompt. Then, go to Command Prompt app and click on the Run as Administrator option to open CMD with administrator privilege.

Before you enter the command to disable WiFi, you must know the correct name of the wireless interface that you want to disable. So, first, enter the following command to view the names of your network interfaces:

netsh wlan show interfaces

Now, type the below command which is used to disable WiFi in Windows 10:

netsh interface set interface name="WirelessNetworkName" admin=DISABLED

Replace WirelessNetworkName with the name of your wireless interface (see below screenshot for example).

After typing the command, press Enter to run it; it will disable WiFi on your PC.

Here are some other commands that you must know in case you want to switch WiFi settings:

To enable WiFi connection again, enter the command:

netsh interface set interface name="WiFiNetworkName" admin=ENABLED

If you want to simply disconnect WiFi, this command can be used:

netsh wlan disconnect

To connect to a specific WiFi connection, you can enter this command:

netsh wlan connect name="WiFiNetworkName"

Using Powershell

Search for Powershell on Windows 10 and open it with administrator privilege, as depicted in the below screenshot.

Now, to identify the correct adapter name which you want to disable, the following command is used in Powershell:

Get-NetAdapter | format-table

After that, type the below command and press Enter to quickly disable your WiFi:

Disable-NetAdapter -Name "Adapter-Name" -Confirm:$false

If you want to enable your WiFi again, simply enter the below command in Powershell:

Enable-NetAdapter -Name "Adapter-Name" -Confirm:$false

So, you can easily disable or enable a WiFi connection in Windows 10 using Command Prompt or Powershell app. Just enter a disabling command and it will turn off WiFi connection on your computer.

If you want to re-enable WiFi, you can enter another command used for enabling WiFi connection as mentioned above in the article.

Read next: How to disable background WiFi scanning.

Related posts

• 如何测量Windows 10中的WiFi信号强度

• 如何在Windows 10中生成WiFi History or WLAN Report

• WiFi连接，但在Windows 10上没有互联网接入

• WiFi password不适用于Windows 10的非QWERTY键盘

• Windows 10中的Backup and Restore WiFi或Wireless Network Profiles

• 如何在Windows 10使用Public IP address PowerShell

• 如何阻止IP或Windows 10使用PowerShell一个网站

• 如何在Windows 10创建Wi-Fi Network Adapter Report

• 使用 CMD 在 Windows 10 中查找 WiFi 密码

• Create desktop Windows 10中切换到特定WiFi network的快捷方式

• Windows 10 Advanced Command Prompt or CMD Tricks

• 如何找到System Uptime在Windows 10

• 修复 Wi-Fi 适配器在 Windows 10 中不起作用

• Replace PowerShell Context Menu中的Replace PowerShell在Windows 10中

• Run PowerShell Scripts Locally无签名Windows 10

• 如何设置命令提示符和 PowerShell 键盘/桌面快捷方式

• Wi-Fi设置缺少对Windows 10或Surface device

• 7 Ways在Windows 10中打开Elevated Windows PowerShell

• 在Windows 10上禁用CMD and PowerShell中的Scroll-Forward

• Windows 10上的Improve Wireless Network Speed