如果您在打开或启动 Windows 计算机时遇到黑屏并显示错误消息Invalid Configuration Information，那么这篇文章旨在帮助您。在这篇文章中，我们将确定原因，并提供您可以尝试帮助您解决此问题的适当解决方案。

当您遇到此问题时，您将收到以下完整错误消息；

Invalid configuration information – please run SETUP program
Time-of-day not set – please run SETUP program.
Press Fl/VolumeUp key to retry boot
Press F2/VolumeDown key to reboot into setup
Press F5/Home key to run onboard diagnostics

此事件是将BIOS重置为默认值的结果。这是由无意中按住电源按钮至少 25 秒触发的。当您将系统放在包或充电卡中，电源按钮可能会长时间使用的位置时，也可以触发它。

注意^(Note)：如果您在系统上启用了 BitLocker，则受信任的平台模块^{(Trusted Platform Module)}( TPM ) 将被重置，从而导致BitLocker提示输入恢复密钥。

无效Configuration Information – Windows 11/10启动错误

如果您遇到此无效配置信息^{(Invalid Configuration Information)}错误，您可以按以下顺序尝试我们推荐的解决方案，看看是否有助于解决问题。

1. 重置您的自定义 BIOS 选项
2. 更换 CMOS 电池

让我们看一下关于列出的每个解决方案所涉及的过程的描述。

1]重置您的自定义BIOS选项

如果系统已使用设置为Legacy Mode的^{(Legacy Mode)}BIOS进行映像，则此BIOS重置会将系统置于无引导配置，因为默认BIOS 设置为 UEFI。如果您一直在Legacy模式下操作，则需要按 F2 进入BIOS并将引导顺序更改回 legacy，然后重新启动系统。您还需要按 F1 启动（由于未设置时间和日期）然后Windows应自动更新时间和日期。

此解决方案要求您按照屏幕上的指南说明按 F2 键 ^{(F2 Key, )}（如果连接到键盘）或 降低音量按钮^{(Volume Down button)} 进入 BIOS 菜单。

一旦在 BIOS 中重置您的自定义 BIOS 选项，然后验证日期和时间是否正确并更改您正常配置所需的任何其他BIOS菜单选项，然后重新启动系统。

如果这无法解决无效配置信息^{(Invalid Configuration Information)}- Windows 10 启动错误，请继续下一个解决方案。

读取^(Read)：引导配置数据丢失或包含错误。

2]更换CMOS电池

此解决方案要求您更换 Windows 10 计算机上的CMOS 电池，看看是否能解决无效配置信息^{(Invalid Configuration Information)}- Windows 10 启动错误。

为此，您可能需要硬件技术人员的服务。

Hope this helps!

Fix Invalid Configuration Information - Windows boot error

If when you power-on or boot your Windоws computer and you еncounter thе black screen with the error message Invalid Configuration Information, then this post is intended to help you. In this post, we will identify the cause, as well as offer the appropriate solutions you can try to help you remediate this issue.

When you encounter this issue, you’ll receive the following full error message;

Invalid configuration information – please run SETUP program
Time-of-day not set – please run SETUP program.
Press Fl/VolumeUp key to retry boot
Press F2/VolumeDown key to reboot into setup
Press F5/Home key to run onboard diagnostics

This event is the result of resetting the BIOS to defaults. This is being triggered by inadvertently holding down the power button for at least 25 seconds. It can also be triggered when you place the system in a bag or a charging card in a position where the power button may be engaged for a long period.

Note: If you have BitLocker enabled on the system, the Trusted Platform Module (TPM) will be reset causing BitLocker to prompt for the recovery key.

Invalid Configuration Information – Windows 11/10 boot error

If you’re faced with this Invalid Configuration Information error, you can try our recommended solutions in the order presented below and see if that helps to resolve the issue.

1. Reset your custom BIOS options
2. Replace the CMOS battery

Let’s take a look at the description of the process involved concerning each of the listed solutions.

1] Reset your custom BIOS options

If the system has been imaged with the BIOS set in the Legacy Mode, this BIOS reset will place the system in a no-boot configuration as the default BIOS setting is UEFI. If you had been operating in the Legacy mode, you will need to press F2 to enter the BIOS and change the boot order back to legacy, then reboot the system. You will also need to press F1 to boot (due to the time and date are not set) then Windows should update the time and date automatically.

This solution requires you to follow the guide instructions on the screen to press the F2 Key, (if attached to a keyboard) or the Volume Down button to enter the BIOS menu.

Once in the BIOS reset your custom BIOS options, then verify the date & time are correct & change any other needed BIOS menu options for your normal configuration and then restart the system.

If this fails to resolve the Invalid Configuration Information – Windows 10 boot error, continue with the next solution.

Read: Boot Configuration Data is missing or contains errors.

2] Replace the CMOS battery

This solution requires you to change the CMOS battery on your Windows 10 computer and see if that resolves the Invalid Configuration Information – Windows 10 boot error.

You may require the services of a hardware technician for this.

Hope this helps!

Related posts

• Windows 10上的Fix Invalid Depot Configuration Steam Error

• Fix Motherboard error code 99在Windows计算机上

• Fix PXE-E61，Media test故障，check cable boot error在Windows 10上

• Fix Error 1962，在Windows 10计算机上找不到操作系统

• 0xc0000098：Windows Boot Configuration Data不包含OS entry

• Fix Bdeunlock.exe Bad image，System Error或不响应错误

• Fix Windows 10无法从USB启动[已解决]

• Fix Steam App Configuration Missing或Windows 10上的可用错误

• Fix Smart Check通过，HP computer的错误错误

• Fix Application Load Error 5:0000065434在Windows 10上

• Fix NTLDR缺失，Press Ctrl-Alt-Del在Windows 10重新启动错误

• Value受Secure Boot policy的保护，无法修改或删除

• Fix Boot Configuration Data File缺少一些必需的信息

• Fix Logitech Setpoint Runtime error在Windows 10上

• 修复或修复 Windows 10 中的主引导记录 (MBR)

• 双Boot Repair Tool：Repair BCD Boot Configuration Data

• Fix VMware操作系统未找到Boot error

• Fix Microsoft Store在Windows 11/10上登录error 0x801901f4

• Windows 10中恢复，Fix，Repair Master Boot Record（MBR）

• FIX：引导配置数据文件没有Contain Valid Information