启动时使用光标修复黑屏: (Fix Black Screen With Cursor On Startup: )用户报告他们的系统出现了一个新问题,当他们启动 PC 时,它正常启动,进入BIOS屏幕,然后出现Windows徽标屏幕,但在那之后,他们得到一个黑屏中间有一个鼠标光标。他们无法登录屏幕,因为他们被鼠标光标卡在黑屏上。(Black)用户可以移动鼠标但左键单击或右键单击没有响应,键盘也不起作用。并且按Ctrl + Alt + Del或Ctrl + Shift + Esc没有任何作用,基本上,没有任何作用,你被卡在黑屏上。此时,用户唯一的选择是强制关闭 PC 并将其关闭。
此错误的主要原因似乎是显示(Display)驱动程序,但不仅限于此。由于损坏的Windows文件或电池残留有时也会导致此问题。此外,如果您尝试启动到安全模式,那么您可能会再次卡在加载文件中,并且您将再次面对鼠标光标的黑屏。因此,不要浪费任何时间,让我们看看如何使用下面列出的故障排除指南在启动(Startup)时使用光标实际(Cursor)修复黑屏。(Fix Black Screen)
注意:(Note:) 确保(Make)断开连接到 PC 的所有外部设备或附件,并在继续之前尝试这些步骤。
1. 正常启动 Windows 并在看到光标的黑屏(Black Screen)上按Ctrl + Shift + Esc一起打开Windows 任务管理器(Windows Task Manager)。
2.现在在进程选项卡中右键单击Windows Explorer 或 Explorer.exe( Windows Explorer or Explorer.exe)并选择结束任务。(End Task.)
3.接下来,从任务管理器(Task Manager)菜单中单击File > Run new task.
4. 键入Explorer.exe 并单击确定。您将再次看到您的Windows桌面,没有任何问题。
5.现在重新启动您的PC以保存更改,并且可能不再显示带有光标的黑屏。
(Fix Black Screen)启动(Startup)时用光标(Cursor)修复黑屏
方法一:取出电池重新插入(Method 1: Take out Battery and again insert it)
您应该尝试的第一件事是从笔记本电脑中取出电池,然后拔下所有其他USB附件、电源线等。完成后,按住电源按钮 10 秒钟,然后再次插入电池并尝试再次为您的电池充电,看看您是否能够 在 Windows 10 中使用光标在启动时修复黑屏。(Fix Black Screen With Cursor On Startup in Windows 10.)
Method 2: Run Startup/Automatic Repair
1.插入Windows 10 可启动安装 DVD 或恢复光盘( Windows 10 bootable installation DVD or Recovery Disc) 并重新启动您的 PC。
2.当提示Press any key to boot from CD or DVD时,按任意键(press any key)继续。
3.选择您的语言首选项,然后单击下一步(Next)。单击左下角的修复计算机。( Click Repair)
4.在选择选项屏幕上,单击疑难解答。( Troubleshoot.)
5.在疑难解答屏幕上,单击高级选项。(Advanced option.)
6.在高级(Advanced)选项屏幕上,单击自动修复或启动修复。( Automatic Repair or Startup Repair.)
7. 等待Windows Automatic/Startup Repairs完成。
8.重新启动,您已成功修复启动时光标黑屏。(Fix Black Screen With Cursor On Startup.)
另外,请阅读如何修复自动修复无法修复您的 PC。(How to fix Automatic Repair couldn’t repair your PC.)
方法 3:运行系统还原(Method 3: Run System Restore)
1.放入Windows安装媒体或Recovery Drive/System Repair Disc并选择您的语言首选项(anguage preferences),然后单击下一步
2.单击底部的修复计算机。( Repair)
3.现在选择疑难解答(Troubleshoot),然后选择高级选项。(Advanced Options.)
4..最后,点击“系统还原(System Restore)”并按照屏幕提示完成还原。
5.重新启动您的 PC 以保存更改。
方法 4:运行 SFC 和 CHKDSK(Method 4: Run SFC and CHKDSK)
1.再次使用方法1进入命令提示符,只需单击高级(Advanced)选项屏幕中的命令提示符。
2.在cmd中输入以下命令并在每个命令后按回车:
sfc /scannow /offbootdir=c:\ /offwindir=c:\windows
chkdsk C: /f /r /x
注意:确保(Make)使用当前安装Windows的驱动器号。(Windows)同样在上面的命令中 C: 是我们要运行检查磁盘的驱动器,/f 代表一个标志,它 chkdsk 允许修复与驱动器相关的任何错误,/r 让 chkdsk 搜索坏扇区并执行恢复和/x 指示检查磁盘在开始该过程之前卸载驱动器。
3.退出命令提示符并重新启动您的PC。
方法 5:运行 DISM(Method 5: Run DISM)
1.再次从上述方法打开命令提示符。(Command Prompt)
2.在cmd中输入以下命令并在每个命令后按回车:
a) Dism /Online /Cleanup-Image /CheckHealth
b) Dism /Online /Cleanup-Image /ScanHealth
c) Dism /Online /Cleanup-Image /RestoreHealth
3.让DISM命令运行并等待它完成。
4. 如果上述命令不起作用,请尝试以下操作:
Dism /Image:C:\offline /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows
Dism /Online /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows /LimitAccess
注意:(Note:) 将(Replace)C:RepairSourceWindows 替换为修复源的位置(Windows 安装(Windows Installation)或恢复光盘(Recovery Disc))。
5.重新启动您的 PC 以保存更改,这应该可以 修复启动时出现光标的黑屏问题。( Fix Black Screen With Cursor On Startup issue.)
方法 6:启用低分辨率视频(Method 6: Enable low-resolution video)
1.首先,确保删除所有外部附件,然后从 PC 中删除任何 CD 或 DVD,然后重新启动。
2. 按住 F8 键以调出高级启动选项屏幕。 ( advanced boot options screen. )对于Windows 10,您需要遵循以下指南。
3.重新启动您的 Windows 10。
4.随着系统重新启动进入BIOS设置并配置您的 PC 从CD/DVD启动。
5.插入Windows 10可启动安装DVD并重新启动您的 PC。
6.当提示Press any key to boot from CD or DVD时,按任意键继续。
7.选择您的语言首选项, (language preferences, )然后单击下一步。单击左下角的修复计算机。( Click Repair)
8.在选择选项屏幕上,单击疑难解答(Troubleshoot)。
9.在疑难解答屏幕上,单击高级选项(Advanced option)。
10.在高级(Advanced)选项屏幕上,单击命令提示符(Command Prompt)。
11.当命令提示符(Command Prompt)(CMD)打开类型C:并回车。
12.现在输入以下命令:
BCDEDIT /SET {DEFAULT} BOOTMENUPOLICY LEGACY
13.然后按回车键启用旧版高级启动菜单。(Enable Legacy Advanced Boot Menu.)
14.关闭命令提示符(Command Prompt)并返回选择(Choose)一个选项屏幕,单击继续重新启动Windows 10。
15.最后,不要忘记弹出您的Windows 10安装DVD,以获取启动选项。( Boot options.)
16. 在Advanced Boot Options屏幕上,使用箭头键突出显示Enable low-resolution video (640×480),然后按 Enter。
如果问题未在低分辨率模式下出现,则问题与Video/Display驱动程序有关。您可以 通过简单地从制造商的网站下载显卡驱动程序并通过安全模式安装它来(Safe Mode)修复启动时带有光标的黑屏问题(Fix Black Screen With Cursor On Startup issue)。
方法7:尝试安全模式卸载显示驱动程序(Method 7: Try Safe Mode to uninstall Display Driver)
首先使用高级(Advanced)启动选项中的上述指南选择安全模式(Safe Mode),然后按照以下步骤操作:
1.在安全模式下(Mode)按Windows Key + R然后输入 devmgmt.msc并按回车键打开设备管理器(Device Manager)。
2.展开显示(Display)适配器,然后右键单击您的集成显示适配器( integrated Display adapter)并选择卸载。(uninstall.)
3.现在,如果您有专用显卡(Graphic Card),请右键单击它并选择禁用。(Disable.)
4.现在从设备管理器(Device Manager)菜单中单击操作(Action),然后单击扫描硬件更改。(Scan for hardware changes.)
5.重新启动您的PC,看看您是否能够 修复启动时光标黑屏的问题。(Fix Black Screen With Cursor On Startup issue.)
方法 8:修复权限问题(Method 8: Fix Permissions Issues)
1.通过进入安全模式(Safe Mode)或通过Windows 安装(Windows Installation)或恢复光盘打开(Recovery Disc)命令(Command)提示符。
2.在cmd中输入(Enter)以下命令并在每个命令后按Enter。还要确保将 C: 替换为 系统(System)驱动器的驱动器号。
path %path%;C:\Windows\System32
cacls C:\Windows\System32 /E /T /C /G everyone:F
注意:以上命令运行需要一定时间,请耐心等待。
3.重新启动你的电脑,如果黑屏光标问题是由不适当的权限引起的,那么Windows现在应该可以正常运行了。
4.按Windows Key + X然后选择命令提示符(Command Prompt)(管理员(Admin))。
5.在 cmd 中键入以下命令并按Enter:
cacls C:\Windows\System32 /E /T /C /G System:F Administrators:R
cacls C:\Windows\System32 /E /T /C /G everyone:R
6.再次重新启动您的 PC 以保存更改。
为你推荐:(Recommended for you:)
就是这样,您已成功修复启动问题时使用光标的黑屏(Fix Black Screen With Cursor On Startup Issue),但如果您对这篇文章仍有任何疑问,请随时在评论部分提出。
Fix Black Screen With Cursor On Startup
Fix Black Screen With Cursor On Startup: Users are reporting a new issue with their system where when they Startup their PC, it boots normally, it gets to BIOS screen then the Windows logo screen comes up but after that, they get a black screen with a mouse cursor in the middle. They can’t go to log on screen as they are stuck on the Black screen with mouse cursor. Users are able to move the mouse but the left-click or right-click doesn’t respond, the keyboard also doesn’t work. And pressing Ctrl + Alt + Del or Ctrl + Shift + Esc doesn’t do anything, basically, nothing works and you are stuck on the black screen. At this point the only option user has is to force shutdown the PC and turn it off.
The main cause of this error seems to be Display drivers but it’s not limited to that only. As corrupted Windows files or battery residue sometimes also causes this issue. Also, if you will try to boot into safe mode then it’s possible you will be stuck again at loading files and you will again face the black screen with mouse cursor. So without wasting any time let’s see how to actually Fix Black Screen With Cursor On Startup with the below-listed troubleshooting guide.
Note: Make sure to disconnect all external devices or attachments connected to the PC and try these steps before continuing.
1.Boot up your Windows as normal and on the Black Screen where you see your cursor press Ctrl + Shift + Esc together to open Windows Task Manager.
2.Now in the processes tab right-click on Windows Explorer or Explorer.exe and select End Task.
3.Next, from the Task Manager menu click on File > Run new task.
4.Type Explorer.exe and click OK. You would again see your Windows desktop without any issue.
5.Now reboot your PC to save changes and may be the black screen with cursor won’t show up anymore.
Fix Black Screen With Cursor On Startup
Method 1: Take out Battery and again insert it
The first thing you should try is removing your battery from the laptop and then unplugging all the other USB attachment, power cord etc. Once you have done that then press and hold the power button for 10 seconds and then again insert the battery and try to charge you battery again, see if you are able to Fix Black Screen With Cursor On Startup in Windows 10.
Method 2: Run Startup/Automatic Repair
1.Insert the Windows 10 bootable installation DVD or Recovery Disc and restart your PC.
2.When prompted to Press any key to boot from CD or DVD, press any key to continue.
3.Select your language preferences, and click Next. Click Repair your computer in the bottom-left.
4.On choose an option screen, click Troubleshoot.
5.On Troubleshoot screen, click Advanced option.
6.On the Advanced options screen, click Automatic Repair or Startup Repair.
7.Wait til the Windows Automatic/Startup Repairs complete.
8.Restart and you have successfully Fix Black Screen With Cursor On Startup.
Also, read How to fix Automatic Repair couldn’t repair your PC.
Method 3: Run System Restore
1.Put in the Windows installation media or Recovery Drive/System Repair Disc and select your language preferences, and click Next
2.Click Repair your computer at the bottom.
3.Now choose Troubleshoot and then Advanced Options.
4..Finally, click on “System Restore” and follow onscreen instructions to complete the restore.
5.Restart your PC to save changes.
Method 4: Run SFC and CHKDSK
1.Again go to command prompt using the method 1, just click on command prompt in the Advanced options screen.
2.Type the following command in cmd and hit enter after each one:
sfc /scannow /offbootdir=c:\ /offwindir=c:\windows
chkdsk C: /f /r /x
Note: Make sure you use the drive letter where Windows is currently installed. Also in the above command C: is the drive on which we want to run check disk, /f stands for a flag which chkdsk the permission to fix any errors associated with the drive, /r let chkdsk search for bad sectors and perform recovery and /x instructs the check disk to dismount the drive before beginning the process.
3.Exit the command prompt and restart your PC.
Method 5: Run DISM
1.Again open the Command Prompt from the above-specified method.
2.Type the following command in cmd and hit enter after each one:
a) Dism /Online /Cleanup-Image /CheckHealth
b) Dism /Online /Cleanup-Image /ScanHealth
c) Dism /Online /Cleanup-Image /RestoreHealth
3.Let the DISM command run and wait for it to finish.
4. If the above command doesn’t work then try on the below:
Dism /Image:C:\offline /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows
Dism /Online /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows /LimitAccess
Note: Replace the C:\RepairSource\Windows with the location of your repair source (Windows Installation or Recovery Disc).
5.Reboot your PC to save changes and this should Fix Black Screen With Cursor On Startup issue.
Method 6: Enable low-resolution video
1.First of all, make sure to remove all external attachment then remove any CD’s or DVD’s from PC and then reboot.
2.Press and hold the F8 key in order to bring up the advanced boot options screen. For Windows 10 you need to follow the below guide.
3.Restart your Windows 10.
4.As the system restarts enter into BIOS setup and configure your PC to boot from CD/DVD.
5.Insert the Windows 10 bootable installation DVD and restart your PC.
6.When prompted to Press any key to boot from CD or DVD, press any key to continue.
7.Select your language preferences, and click Next. Click Repair your computer in the bottom-left.
8.On choose an option screen, click Troubleshoot.
9.On Troubleshoot screen, click Advanced option.
10.On Advanced options screen, click Command Prompt.
11.When the Command Prompt(CMD) open type C: and hit enter.
12.Now type the following command:
BCDEDIT /SET {DEFAULT} BOOTMENUPOLICY LEGACY
13.And hit enter to Enable Legacy Advanced Boot Menu.
14.Close Command Prompt and back on the Choose an option screen, click continue to restart Windows 10.
15.Finally, don’t forget to eject your Windows 10 installation DVD, in order to get Boot options.
16. On the Advanced Boot Options screen, use the arrow keys to highlight Enable low-resolution video (640×480), and then press Enter.
If the issues doesn’t appear in the low-resolution mode, then the issue is related to Video/Display drivers. You could Fix Black Screen With Cursor On Startup issue by simply downloading the display card driver from the manufacturer’s website and installing it via Safe Mode.
Method 7: Try Safe Mode to uninstall Display Driver
First using above guide from the Advanced boot option select Safe Mode then follow the below steps:
1.In Safe Mode press Windows Key + R then type devmgmt.msc and hit enter to open Device Manager.
2.Expand Display adapter then right-click on your integrated Display adapter and select uninstall.
3.Now if you have a dedicated Graphic Card then right-click on it and select Disable.
4.Now from the Device Manager menu click Action then click Scan for hardware changes.
5.Reboot your PC and see if you are able to Fix Black Screen With Cursor On Startup issue.
Method 8: Fix Permissions Issues
1.Open Command prompt by either going to Safe Mode or via Windows Installation or Recovery Disc.
2.Type the following command into cmd and hit Enter after each one. Also make sure to replace C: with the drive letter of your System drive.
path %path%;C:\Windows\System32
cacls C:\Windows\System32 /E /T /C /G everyone:F
Note: The above commands will take some time to run so please be patient.
3.Reboot your PC and if the black screen with cursor issue was caused by inappropriate permissions then Windows should now function normally.
4.Press Windows Key + X then select Command Prompt (Admin).
5.Type the following command into cmd and hit Enter:
cacls C:\Windows\System32 /E /T /C /G System:F Administrators:R
cacls C:\Windows\System32 /E /T /C /G everyone:R
6.Again restart your PC to save changes.
Recommended for you:
That’s it you have successfully Fix Black Screen With Cursor On Startup Issue but if you still have any questions regarding this post then feel free to ask them in the comment’s section.