如果您收到错误消息 —启动 StartupCheckLibrary.dll 时出现问题，找不到指定的模块^{(There was a problem starting StartupCheckLibrary.dll, The specified module could not be found)}— 那么这篇文章将帮助您解决问题。

StartupCheckLibrary.dll是位于C:\Windows\System32文件夹中的官方Microsoft Windows系统文件。如果它位于其他地方，则可能是恶意软件。

启动StartupCheckLibrary.dll时出现问题^{(StartupCheckLibrary.dll)}

现在，由于Windows无法找到该模块，这可能意味着该文件已丢失、已被删除或已损坏。以下是一些可以帮助您前进的建议。

• 检查您的防病毒软件^(Antivirus)是否已隔离文件。
• 运行 SFC 命令
• 从启动^(Startup)中禁用StartupCheckLibrary.dll条目^{(StartupCheckLibrary.dll)}

您将需要管理权限来解决此丢失的 DLL 文件^{(missing DLL file)}问题。

1]检查^(Check)防病毒软件^(Antivirus)是否已隔离文件。

如果您使用的是Windows 安全^{(Windows Security)}性，请打开它，转到病毒^(Virus)和威胁防护部分，然后单击保护^(Protection)历史记录链接。它将列出文件，如果您找到StartupCheckLibrary.dll。这里可能有两种情况。

首先，该DLL已被标记为Trojan/Virus，并且 -

1. 它可能真的是病毒或
2. 这可能是误报。

断开 Internet 连接并转到Windows Defender 隔离区部分^{(Windows Defender Quarantine section)}，您将看到该文件被隔离在那里。单击^(Click)查看详细^(See)信息，然后检查文件路径。

• 如果它来自System 32文件夹，您可以单击“恢复”^(Restore)按钮。
• 如果路径显示为其他内容，则可能是恶意软件，最好让它保留在那里。

并单击从隔离区中删除文件。该文件将被放回其原始位置。

现在，如果文件是合法的，那么它可能会再次被删除，为此，您需要添加一个 Exclusion^{(add an Exclusion)}。再次检测到它后，您可以单击“操作”^(Action)按钮，然后将其移至“允许的威胁^{(Allowed Threats)}”部分。

如果它被标记为病毒，那么您将需要将其删除。

2]运行SFC命令

SFC 或系统文件检查器命令可以扫描Windows并替换任何损坏或丢失的系统文件。请按照以下步骤操作：

• 使用提升的权限打开命令提示符。^{(Command Pr0ompt)}
• 键入 SFC /scannow，然后按 Enter。
• 让它完成它的工作。
• 该过程也可能会修复其他文件。

完成此操作后，您不应收到此错误。

3]从启动中^(Startup)禁用 StartupCheckLibrary.dll条目^{(Disable StartupCheckLibrary.dll)}

如果这些都不起作用，则DLL已被感染，您仍然会收到错误消息；最后一个选项是从启动项中禁用或删除它^{(disable or remove it from the startup entry)}。虽然Windows允许删除应用程序，但删除^(Windows)DLL并不容易。这就是微软的^(Microsoft)Autoruns程序出现的地方。

Autoruns 是一个强大的实用程序，它可以定位在^{(Autoruns is a powerful utility)}Windows启动和用户登录帐户时应该运行的任何内容。

下载并运行该实用程序后，您可以使用DLL名称进行搜索。一旦它出现在列表中，您可以取消选中它。它将确保您不会收到错误。

我希望这篇文章很容易理解，并且您能够通过启动StartupCheckLibrary.dll来解决问题。

There was a problem starting StartupCheckLibrary.dll in Windows 11/10

Іf you recеive an error message — There was a problem starting StartupCheckLibrary.dll, The specified module could not be found — then this post will help you resolve the problem.

StartupCheckLibrary.dll is an official Microsoft Windows system file that is located in the C:\Windows\System32 folder. If it is located elsewhere, it could be malware.

There was a problem starting StartupCheckLibrary.dll

Now since Windows is unable to find the module, it could mean that the file has gone missing, has been deleted or has become corrupted. Here are some suggestions that will help you move forward.

• Check if your Antivirus has quarantined the file.
• Run SFC Command
• Disable StartupCheckLibrary.dll entry from the Startup

You will need administrative permission to resolve this missing DLL file issue.

1] Check if Antivirus has quarantined the file.

If you are using Windows Security, open it, go to the Virus and threat protection section, and click on the Protection history link. It will list the files, and if you find the StartupCheckLibrary.dll. There can be two situations here.

First, the DLL has been marked as Trojan/Virus, and-

1. It could really be a virus or
2. It could be a false positive.

Disconnect from the internet and go to the Windows Defender Quarantine section, You will see the file quarantined there. Click on See details, and check the file path.

• If it was from the System 32 folder you may click the Restore button.
• If the path is shown as something else, it could be malware and it is best to let it remain there.

and click remove the file from the quarantine. The file will be placed back in its original place.

Now if the file is legit, then it could get removed again, and for that, you will need to add an Exclusion. Once it is detected again, you can click on the Action button and then move it to the Allowed Threats section.

If it was marked as a virus, then you will need to delete it.

2] Run SFC Command

SFC or System File Checker command can scan Windows and replace any corrupted or missing system files. Follow the steps below:

• Open Command Pr0ompt with elevated privileges.
• Type SFC /scannow, and hit Enter.
• Let it complete its job.
• It is possible that the process may repair other files as well.

Once through this, you should not receive this error.

3] Disable StartupCheckLibrary.dll entry from the Startup

If none of these work, the DLL is infected, and you still get the error; the last option is to disable or remove it from the startup entry. While Windows allows removing applications, it is not easy to remove a DLL. That is where the Autoruns program from Microsoft comes into the picture.

Autoruns is a powerful utility that can locate anything which is supposed to run when Windows starts and the user logs into the account.

Once you download the utility and run it, you can search with the DLL name. Once it appears in the list, you can uncheck it. It will make sure you do not get the error.

I hope the post was easy to follow, and you were able to resolve the issue with starting StartupCheckLibrary.dll.

Related posts

• 什么是Windows 10 Sihost.exe？如何知道它是否是病毒？

• Windows 10中的yyphone.exe进程是什么？我删除它吗？

• Windows 11/10中的Microsoft Office Click-To-Run High CPU usage

• Fix System中断Windows 11/10中的高CPU usage

• Fix Services和Controller应用High CPU usage在Windows 10

• 如何在Windows 10中添加Trusted Site

• Windows 10为Adjust您的Monitor为Windows 10的screen resolution

• 如何在Windows 11/10中测试Webcam？它在工作吗？

• Fix DCFWinService High Disk Usage上Windows 11/10

• Windows 10中的Fix Bluetooth声音延迟

• Fix File Picker UI Host PickerHost.exe Windows 11/10没有响应

• 如何在Windows 10备份，Move，Move，或Delete PageFile.sys关闭

• Taskbar通知未显示在Windows 10中

• 如何在Windows 10启用或Disable Archive Apps feature

• Fix CRITICAL PROCESS DIED，0x000000EF错误Windows 11/10

• 如何测量Windows 11/10中的Reaction Time

• 启用Network Connections而在Modern Standby上Windows 10

• 如何使用Windows 10的Alarms and Clocks app

• 如何使用Windows 10的Charmap and Eudcedit内置工具

• 如何在Windows 11/10上找到Application Process ID