虽然Apple Watch具有防水功能，但它并不防水。如果水进入扬声器格栅，会产生低沉的声音。为了解决这个问题，watchOS 有一个名为Water Lock 的(Water Lock)功能，可以帮助您从扬声器中排出水。
本教程将教您如何使用Water Lock将水从(Water Lock)Apple Watch中排出并防止水分渗入内部。
如何在Apple Watch上(Apple Watch)激活(Activate)和使用 Water Lock(Use Water Lock)
Water Lock适用于Apple Watch Series 2、Apple Watch SE、Apple Watch Ultra和更新型号。当 watchOS 检测到您正在游泳、潜水或滑水时，它会自动激活，但您也可以在进行水上活动之前手动启用它。您还可以在弄湿Apple Watch(Apple Watch)后打开并使用Water Lock。
要打开水锁：
- (Swipe)从表盘底部向上滑动可打开控制中心(Control Center)。
- 找到(Locate)并点击水锁(Water Lock)图标。
(Water Lock)您的Apple Watch(Apple Watch)现已启用Water Lock，您应该会在表盘顶部看到Water Lock状态符号图标。(Water Lock)在该功能处于活动状态期间，屏幕保持无响应。
完成活动后，您可以使用Water Lock将水从Apple Watch中排出。如果Water Lock未自动开启或您手动启用失败，则必须先将其激活。然后：
- 按住(Press)数码表(Digital Crown)冠。显示应从按住表(Press)冠关闭水锁更改为保持按住。
- 当Apple Watch(Apple Watch)从扬声器中排出水
时，您应该会听到一系列提示音。
- 喷水(Ejecting)动画结束后松开数码表冠(Digital Crown)。
注意：如果您使用运行 watchOS 8 或更早版本的 Apple Watch(Apple Watch running watchOS 8)，则必须旋转数码表冠以(Digital Crown)将水从扬声器中排出。
如果 Apple Watch 的扬声器声音低沉，请多次启用并使用Water Lock功能。(Water Lock)如果问题仍然存在，请用不起毛的布擦拭并让其干燥过夜。您可以通过将 watchOS 设备放在充电器上来加速蒸发。
了解Apple Watch(Your Apple Watch)的防水性能(Water Resistance)
永远记住，虽然Apple Watch具有防水功能，但它并不防水。此外，并非所有Apple Watch型号都专为水上活动而设计。
例如，第一代和第二代Apple Watch(Apple Watches)仅具有防溅功能，不建议在游泳时佩戴。另一方面，Apple Watch 2 系列(Series)及更新型号适合浅水活动，而Apple Watch Ultra是唯一可以承受潜水和滑水的手表。
此外，您必须格外小心，避免将 watchOS 设备暴露于某些物质，例如肥皂、乳液和洗发水，这些物质可能会永久损坏其水封。此外，由不锈钢和皮革制成的表带如果经常与水接触也会降解。
确定您的 Apple Watch 型号(Identify your Apple Watch model)并查看这篇 Apple 支持文章(check this Apple Support article)，了解有关其防水功能的更多信息。
保持 Apple Watch 干燥
(Water Lock)Apple Watch上的Water Lock是一个方便的工具，可以保护设备免受水损坏。无论您是去游泳还是淋雨，Water Lock都可以帮助您排出扬声器中的水，让您的Apple Watch平稳运行。但是，请记住始终牢记 watchOS 设备的防水功能，并避免可能造成持久伤害的水性活动。
How to Get Water Out of Your Apple Watch
Although the Apple Watch is water resistant, it’s not waterproof. If water enters the speaker grills, it can produce muffled sounds. To combat this, watchOS has a feature called Water Lock that helps you eject water from the speakers.
This tutorial will teach you how to use Water Lock to get water out of your Apple Watch and prevent moisture from seeping inside.
How to Activate and Use Water Lock on Apple Watch
Water Lock is available on the Apple Watch Series 2, Apple Watch SE, Apple Watch Ultra, and newer models. It activates automatically when watchOS detects you’re swimming, diving, or water-skiing, but you can also enable it manually before you engage in a water-based activity. You can also turn on and use Water Lock after getting your Apple Watch wet.
To turn on Water Lock:
- Swipe up from the bottom of the watch face to open the Control Center.
- Locate and tap the Water Lock icon.
Water Lock is now enabled on your Apple Watch, and you should see a Water Lock status symbol icon at the top of the watch face. The screen remains unresponsive for the duration the feature is active.
Once you finish the activity, you can use Water Lock to eject the water from your Apple Watch. If Water Lock did not turn on automatically or you failed to enable it manually, you must activate it first. Then:
- Press and hold the Digital Crown. The display should change from Press and hold crown to turn off water lock to Keep holding.
- You should hear a sequence of tones as your Apple Watch expels the water from its speakers.
- Release the Digital Crown after the Ejecting water animation ends.
Note: If you use an Apple Watch running watchOS 8 or earlier, you must rotate the Digital Crown to eject water from the speakers.
If the Apple Watch’s speakers sound muffled, enable and use the Water Lock feature multiple times. If the problem persists, wipe it with a lint-free cloth and let it dry overnight. You can speed up evaporation by keeping the watchOS device on its charger.
Understand the Water Resistance of Your Apple Watch
Always remember that while the Apple Watch is water-resistant, it’s not waterproof. Moreover, not all Apple Watch models are designed for water-based activities.
For instance, the first and second-generation Apple Watches are only resistant to splashes, and wearing them while swimming is not recommended. On the other hand, Apple Watch 2 Series and newer models are suitable for shallow water activities, while the Apple Watch Ultra is the only one that can endure diving and water-skiing.
Furthermore, you must take extra care to avoid exposing your watchOS device to certain substances, such as soap, lotions, and shampoo, which can permanently damage its water seals. Also, watch bands made from stainless steel and leather can degrade if constantly in contact with water.
Identify your Apple Watch model and check this Apple Support article to learn more about its water resistance capabilities.
Keep Your Apple Watch Dry
Water Lock on your Apple Watch is a handy tool to protect the device from water damage. Whether you’re going for a swim or get caught in the rain, Water Lock can help you eject water from the speakers and keep your Apple Watch running smoothly. However, remember to always keep the water resistance capabilities of your watchOS device in mind and avoid water-based activities that can cause lasting harm.
