重新启动通常可以修复无法正常工作的Apple Watch 。虽然watchOS没有那么多错误，但如果您遇到任何软件问题，您可能仍需要每隔几个月重新启动一次智能手表。
在本教程中，我们将向您展示如何打开、唤醒和关闭Apple Watch。
如何打开 Apple Watch
Apple Watch的启动独立于配对的 iPhone 或其他Apple设备。手表不会与 iOS 设备同步关闭或重启。当您想使用Apple Watch时，您必须手动打开它。还值得记住的是，您不能将Apple Watch与Mac或 iPad 配对。
要打开Apple Watch的电源，请按住位于Digital Crown下方的侧边按钮。当您在Apple Watch(Apple Watch)显示屏上看到Apple标志时，您可以松开侧边按钮。您的Apple Watch现在将开始启动。
如果您的Apple Watch处于省电(Power Reserve)模式（一种省电功能），同样的方法也适用。按住侧面按钮唤醒手表并使其退出省电(Power Reserve)模式。
请记住(Remember)，您无法在Apple Watch充电时重新启动它。您必须将手表从充电器上取下来才能开机。如果您要在Apple Watch上安装软件更新，建议您在软件更新完成之前不要将手表从充电座(charging cradle)中取出。
如果这不起作用，您的Apple Watch可能已经没电了。您可以将手表放在充电器上并等待几分钟。Apple标志应出现在Apple Watch(Apple Watch)屏幕上，您的手表很快就会自动开机。请注意，在输入密码之前
，您将无法使用Apple Watch 。
如果你觉得长按侧边按钮很困难，你可以考虑改变Apple Watch的方向。您可以将Apple Watch(Apple Watch)取下，将其翻转过来，以便更容易按下侧边按钮，然后再次佩戴。在此之后，打开 iPhone 上的Watch应用程序并转到我的手表(My Watch)选项卡。
Tap General > Watch Orientation在Apple Watch设置中(Apple Watch)轻点“通用”>“手表方向”，然后将其更改为您的首选选项。
如何唤醒您的 Apple Watch
如果 Apple Watch 的显示屏关闭，有多种方法可以唤醒它。最简单的方法是点击屏幕一次，显示屏将自动开启。如果您有Apple Watch Series 5、Series 6或Series 7，您的智能手表可能具有Always On Display功能。
如果启用此功能，您可能会注意到电池寿命受到影响，但 Apple Watch 的显示屏将始终开启。
或者，您可以启用Apple Watch的抬腕唤醒屏幕功能。为此，请转至 iPhone 上的Apple Watch应用，导航至“我的手表”(My Watch)选项卡> Display与亮度(Brightness)”，然后启用“抬腕(Wrist Raise)唤醒(Wake)” 。
在同一页面上，启用Wake on Crown Up，您可以使用Digital Crown唤醒 Apple Watch 的显示屏。显示屏关闭时，您可以缓慢旋转Digital Crown表冠以扫视屏幕，然后将其旋转回来以关闭显示屏。
如果您想在电影院等昏暗的地方查看时间，这种方法特别有效，并且可以避免打扰周围的其他人。
如果Apple Watch的显示屏不容易唤醒，请检查您是否不小心启用了DND（请勿打扰(Disturb)）模式，如剧院模式。在Apple Watch上，导航到任意表盘，然后从屏幕底部向上滑动。
这将打开控制中心(Control Center)。确保(Make)禁用免打扰(DND)模式。点击半月形图标或床图标，如果已启用则将其禁用。您还应该检查剧院面具图标是否已启用。这是您手表的影院模式(Cinema Mode)（也称为影院模式），可防止您抬起手腕或接收通知(receive notifications)时唤醒您的显示器。
您还可以自定义控制中心(customize the Control Center)以优先使用您最常使用的快捷方式。
如何关闭 Apple Watch
要关闭Apple Watch，您可以按住侧边按钮，直到看到“关机”(Power Off)滑块。在关机按钮上(Power Off)向右滑动(Swipe)，您的可穿戴设备将被关闭。很遗憾，您不能使用Siri来关闭Apple Watch。
如果您想强制重启无响应的Apple Watch，您可以按住Digital Crown和侧边按钮 10 秒钟，直到出现Apple标志。
最后，如果重启Apple Watch(Apple Watch)无法解决问题，您还可以尝试重启配对的 iPhone。如果您拥有一款带有Face ID的 Apple 智能手机，请同时按住侧边按钮和音量增大按钮，直到您看到关机滑块。在电源滑块上向右滑动(Swipe)将其关闭，然后按住侧边按钮以重新启动设备。
在没有Face ID(Face ID)的iPhone 上，您可以按住顶部按钮或侧边按钮，然后按照上述相同步骤操作。
充分利用您的 Apple Watch
现在您的Apple Watch又可以正常工作了，您应该充分利用它。查看我们的最佳 Apple Watch 应用(best Apple Watch apps)指南，了解有关您最喜爱的智能手表的更多信息。
How to Turn On, Wake, and Turn Off Your Apple Watch
Restarting can often fix an Apple Watch that isn’t working correctly. While watchOS doesn’t have that many bugs, you may still have to restart your smartwatch once every few months if you face any software issues.
In this tutorial, we’re going to show you how to turn on, wake, and turn off your Apple Watch.
How to Turn On Your Apple Watch
Your Apple Watch’s startup is independent of the paired iPhone or other Apple devices. The watch won’t shut down or restart in tune with the iOS device. You’ll have to manually turn on your Apple Watch when you want to use it. It’s also worth remembering that you cannot pair your Apple Watch with a Mac or iPad.
To power on your Apple Watch, press and hold the side button, which is located below the Digital Crown. You can release the side button when you see the Apple logo on the Apple Watch display. Your Apple Watch will now begin starting.
The same method also works if your Apple Watch is in Power Reserve mode, a battery-saving feature. Press and hold the side button to wake the watch and take it out of Power Reserve mode.
Remember that you cannot restart your Apple Watch while it is charging. You’ll have to take the watch off its charger to power it on. If you’re installing a software update on your Apple Watch, it’s recommended that you don’t remove the watch from its charging cradle until the software update is complete.
If this does not work, your Apple Watch may have run out of charge. You can place the watch on its charger and wait a couple of minutes. The Apple logo should appear on the Apple Watch screen, and your watch will turn itself on shortly. Be aware that you will not be able to use your Apple Watch until you enter its passcode.
If you find it hard to press and hold the side button, you might consider changing the Apple Watch’s orientation. You can take off the Apple Watch, flip it over so that the side button is easier to press, and wear it again. After this, open the Watch app on your iPhone and go to the My Watch tab.
Tap General > Watch Orientation in Apple Watch settings and change it to your preferred option.
How to Wake Your Apple Watch
If your Apple Watch’s display is off, there are multiple ways to wake it up. The easiest method is to tap the screen once, and the display will turn itself on. If you have an Apple Watch Series 5, Series 6, or Series 7, your smartwatch may have the Always On Display feature.
If this is enabled, you may notice a hit to your battery life, but your Apple Watch’s display will always be on.
Alternatively, you enable Apple Watch’s wake screen on wrist raise feature. To do this, go to the Apple Watch app on your iPhone, navigate to My Watch tab > Display & Brightness, and enable Wake on Wrist Raise.
On the same page, enable Wake on Crown Up, which lets you use the Digital Crown to wake your Apple Watch’s display. When the display is off, you can rotate the Digital Crown slowly to glance at the screen and then rotate it back to turn off the display.
This method is particularly effective if you want to check the time in a dim place, such as the movie theater, and it allows you to avoid disturbing others around you.
If your Apple Watch’s display doesn’t wake easily, check if you’ve accidentally enabled a DND (Do Not Disturb) mode like theater mode. On your Apple Watch, navigate to any watch face, and swipe upwards from the bottom of the screen.
This will open the Control Center. Make sure that the DND mode is disabled. Tap the half-moon icon or the bed icon and disable it if it’s enabled. You should also check if the theater mask icon is enabled. This is your watch’s Cinema Mode (also known as theater mode), which prevents your display from waking up when you raise your wrist or receive notifications.
You can also customize the Control Center to prioritize the shortcuts you use the most.
How to Turn Off Your Apple Watch
To shut down your Apple Watch, you can press and hold the side button till you see the Power Off slider. Swipe to the right on the Power Off button, and your wearable device will be switched off. Unfortunately, you cannot use Siri to turn off your Apple Watch.
If you want to force restart an unresponsive Apple Watch, you can hold the Digital Crown and the side button for 10 seconds until the Apple logo appears.
Finally, if an issue isn’t resolved by restarting the Apple Watch, you can also try restarting the paired iPhone. If you own one of Apple’s smartphones with Face ID, press and hold the side button and the volume up button simultaneously until you see the power off slider. Swipe right on the power slider to switch it off, and then hold the side button to restart the device.
On iPhones without Face ID, you can press and hold the top button or the side button and follow the same steps mentioned above.
Make the Most of Your Apple Watch
Now that your Apple Watch is working fine again, you should make the most of it. Check out our guide to the best Apple Watch apps to learn more about your favorite smartwatch.
