Apple AirPods可以在非 Apple 设备上使用,只要它们支持蓝牙(Bluetooth-enabled)。将 AirPods 连接到 Windows 11 电脑就像将耳机与 Android 设备(pairing the headphones to Android devices)、iPhone 和 iPad
配对一样简单。
我们将向您展示如何将 AirPods 连接到Windows 11 设备(Windows 11 devices)。在继续之前,值得注意的是电池电量不足会中断连接过程。因此,请确保您的AirPods(和充电盒)有足够的电量(have enough charge)。将 AirPods 的电池电量至少充电 20%。
将 AirPods 置于配对模式
您的AirPods必须处于配对模式才能连接到Windows或其他设备。配对模式可将AirPods与其他设备断开连接,并使其可用于连接新设备。本节重点介绍使不同AirPods型号可用于配对的步骤。
将AirPods(第 1 代、第 2 代和第 3 代)和AirPods Pro置于配对模式(Pairing Mode)
(Insert)将左右 AirPods 插入充电盒并打开盖子。按住充电盒背面的设置(Setup)按钮 3-5 秒。当机箱正面的状态指示灯呈白色闪烁时松开按钮。
将 AirPods Max 置于配对模式
按住AirPods Max 右耳罩顶部的噪音控制按钮。(Noise Control)当状态指示灯(右耳罩下方)呈白色闪烁时松开按钮。
这会使您的 AirPods Max处于配对模式 30 秒,这意味着您有 30 秒的窗口将耳机连接到您的计算机。
将 AirPods 连接到 Windows 11
前往Windows 11 蓝牙(Bluetooth)设置菜单,将AirPods连接到您的计算机。
- 按Windows + I打开设置应用程序,选择侧边栏上的(Settings)蓝牙(Bluetooth)和设备,然后打开 PC 的蓝牙(Bluetooth)。选择添加(Add)设备图标以继续。
- (Select Bluetooth)在弹出窗口中
选择蓝牙。
- 在设备列表中选择您的 AirPods。
如果您的 AirPods 不再处于配对模式,Windows 将显示以下任一错误消息:
- 我们没有得到设备的任何响应。再次尝试连接。
- 无法连接。再次尝试连接。
关闭“添加(Add)设备”窗口,再次将AirPods置于配对模式,然后重复步骤 #1 和 #2。请记住保持您的AirPods外壳盖打开 - 合上盖子会中断配对过程。
- (Select Done)当您看到“您的设备已准备就绪”消息时,选择完成。您的 AirPods 现在已连接以进行语音输入和声音输出。
Windows不支持Apple设备可用的所有AirPods功能。例如,当连接到MacBook或 iPhone时,您可以在降噪(Noise Cancellation)和通透(Transparency)模式之间远程切换AirPods 。对话增强(Conversation Boost)、空间音频(Spatial Audio)和优化电池充电(Optimized Battery Charging)等功能也是Apple设备独有的。
您只能使用 AirPods 的物理噪音控制按钮
在Windows中启用/禁用(Windows)降噪(Noise Cancellation)或通透模式。(Transparency Mode)
您只需将 AirPods 与您的Windows PC 配对一次。后续的连接就容易多了。打开设置(Settings),前往蓝牙(Bluetooth)和设备,然后选择AirPods 下方
的连接按钮。(Connect)
将 AirPods 设置(Set AirPods)为首选音频设备(Preferred Audio Device)
如果您的AirPods 在连接到 Windows 11 电脑时不播放音频(AirPods don’t play audio when connected),请检查您的电脑的音量是否已静音。按下键盘上的音量调高键可提高 PC/AirPods 的输出音量。
接下来,确认AirPods是首选音频设备。有时,在将 AirPods 与电脑配对后
, Windows 无法正确地将音频输出路由到您的 AirPods。(Windows fails to correctly route audio output)
- 选择任务栏上的扬声器(Speaker)图标(或按Windows键 + A)打开Windows 操作中心(Windows Action Center)。
- 单击(Click)音量滑块旁边
的选择声音输出图标。(Select)
- 在声音输出设备列表中选择您的 AirPods。
或者,前往Settings > System > Sound > Output选择(Choose)播放声音的位置”下拉菜单中
选择您的 AirPods 。
滚动到“输入”部分,让 AirPods 成为说话或录音的设备。
(Disconnect)在Windows 11中(Windows 11)断开或取消配对 AirPods(Unpair AirPods)
AirPods 放入充电盒时会自动断开与 PC 的连接。AirPods Max在静止 5 分钟或放入Smart Case时会断开连接。您也可以通过 Windows 设置菜单手动断开耳机(disconnect the headphones via the Windows Settings menu)。
- 前往Settings > BluetoothAirPods卡上的三点菜单图标,然后选择“断开连接(Disconnect)” 。
- (Select Remove)如果您想取消 AirPods 与电脑的配对,请
选择移除设备。
- 在确认提示中选择是(Yes)继续。
AirPods 无法连接到 Windows 11?尝试这些修复
更新您的 AirPods 固件(Updating your AirPods firmware)并重新启动计算机也可能会解决此问题。有关更多故障排除修复,请参阅我们关于修复 Windows 设备上的 AirPods 连接问题(fixing AirPods connectivity problems on Windows devices)的教程。
How to Connect AirPods to a Windows 11 Computer
Apple AirPods work on non-Aрple devices as long as they’re Bluetooth-enabled. Connecting AirPоds to Windоws 11 computеrs is as easy as pairing the headphones to Android devices, iPhones, and iPads.
We’ll show you how to connect AirPods to Windows 11 devices. Before you proceed, it’s worth noting that low battery power can interrupt the connection process. So, ensure your AirPods (and charging case) have enough charge. Charge your AirPods’ battery level to at least 20%.
Put AirPods in Pairing Mode
Your AirPods must be in pairing mode to connect to Windows or other devices. Pairing mode disconnects the AirPods from other devices and makes them available for connection to a new device. This section highlights steps to make different AirPods models available for pairing.
Put AirPods (1st, 2nd, and 3rd generation) and AirPods Pro in Pairing Mode
Insert the left and right AirPods in the charging case and open the lid. Press the Setup button at the back of the charging case for 3-5 seconds. Release the button when the status light on the front of the case flashes white.
Put AirPods Max in Pairing Mode
Press and hold the Noise Control button at the top of your AirPods Max’s right earcup. Release the button when the status light (below the right earcup) flashes white.
That puts your AirPods Max in pairing mode for 30 seconds, meaning you have a 30-second window to connect the headphones to your computer.
Connect AirPods to Windows 11
Head to the Windows 11 Bluetooth settings menu to connect AirPods to your computer.
- Open the Settings app by pressing Windows + I, select Bluetooth & devices on the sidebar, and turn on your PC’s Bluetooth. Select the Add device icon to proceed.
- Select Bluetooth on the pop-up window.
- Select your AirPods on the list of devices.
Windows will display either of the following error messages if your AirPods are no longer in pairing mode:
- We didn’t get any response from the device. Try connecting again.
- Couldn’t connect. Try connecting again.
Close the “Add a device” window, put your AirPods in pairing mode again, and repeat steps #1 and #2. Remember to keep your AirPods case lid open—closing the lid can interrupt the pairing process.
- Select Done when you see a “Your device is ready to go” message. Your AirPods are now connected for voice input and sound output.
Windows doesn’t support all of the AirPods features available to Apple devices. For example, you can remotely switch AirPods between Noise Cancellation and Transparency mode when connected to a MacBook or iPhone. Features like Conversation Boost, Spatial Audio, and Optimized Battery Charging are also exclusive to Apple devices.
You can only enable/disable Noise Cancellation or Transparency Mode in Windows using the AirPods’ physical noise control buttons.
You only need to pair AirPods to your Windows PC once. Subsequent connections are a lot easier. Open Settings, go to Bluetooth & devices and select the Connect button below your AirPods.
Set AirPods as the Preferred Audio Device
If your AirPods don’t play audio when connected to your Windows 11 PC, check that your computer’s volume isn’t muted. Press the Volume Up key on the keyboard to increase your PC/AirPods output volume.
Next, verify that AirPods is the preferred audio device. Sometimes, Windows fails to correctly route audio output to your AirPods after pairing them to your computer.
- Select the Speaker icon on the taskbar (or press Windows key + A) to open the Windows Action Center.
- Click the Select a sound output icon next to the volume slider.
- Select your AirPods on the list of sound output devices.
Alternatively, head to Settings > System > Sound > Output and select your AirPods in the “Choose where to play sound” drop-down menu.
Scroll to the “Input” section and make your AirPods the device for speaking or recording.
Disconnect or Unpair AirPods in Windows 11
AirPods automatically disconnect from your PC when placed in the charging case. AirPods Max disconnects when stationary for 5 minutes or when placed in the Smart Case. You can also manually disconnect the headphones via the Windows Settings menu.
- Go to Settings > Bluetooth & devices, select the three-dot menu icon on the AirPods card, and select Disconnect.
- Select Remove device if you want to unpair the AirPods from your computer.
- Select Yes on the confirmation prompt to proceed.
AirPods Not Connecting to Windows 11? Try These Fixes
Updating your AirPods firmware and rebooting your computer might also resolve the problem. For more troubleshooting fixes, refer to our tutorial on fixing AirPods connectivity problems on Windows devices.