有新的Apple Watch并且需要帮助进行设置?我们是来帮忙的。首先,您需要找一个舒适的工作场所,并留出大约 30 分钟的时间。
您首先必须将Apple Watch连接到手机,然后您需要配置一些必要的设置。一旦您安顿下来并准备出发,请向下滚动以获取分步说明。
在你开始前
要配对和配置您的Apple Watch,您需要一部装有最新版本 iOS 的 iPhone。您还需要确保您的 iPhone 已打开蓝牙并且已连接到(Bluetooth)Wi-Fi或蜂窝网络。
您可以在控制中心(Control Center)找到这些设置。最后但同样重要的是,您应该确保Apple Watch和 iPhone 都已充满电。
第 1 步:启动配对
当您将新的Apple Watch带到 iPhone 附近时,iPhone 会将其识别为新设备并提示您进行配对。这种自动检测简化了配对过程。只需(Just)记住在配对两个设备时将Apple Watch和 iPhone 靠得很近。(Apple Watch)如果您的 iPhone 放在房间对面的充电座中,配对过程将失败。
- 按住侧边按钮,直到出现Apple标志,打开Apple Watch 。
- 将Apple Watch放在 iPhone 附近。
- A使用您的 iPhone 设置此 Apple Watch( Use your iPhone to set up this Apple Watch)消息应该会出现在您的 iPhone 上。注意:如果您没有看到此消息,则需要通过打开 iPhone 上的Watch应用程序来启动配对过程,然后选择All Watches,然后选择Pair New Watch。
- 选择继续(Continue)。
- 如果这是您的个人Apple Watch ,请选择为我自己设置(Set Up for Myself)。
- 或者,如果手表(Watch)属于 家庭成员,请选择为家庭成员设置。(Set Up for a Family Member)
- 将 iPhone 相机放在手表上的动画上方。
- (Center)将Watch动画置于 iPhone 相机取景器的中心。
- 如果成功,您将看到一条消息显示您的Apple Watch已配对。
Apple依靠 iPhone 摄像头将Watch与 iPhone 配对。如果您无法使用相机,您可以选择手动配对 Apple Watch(Pair Apple Watch Manually),然后按照提示使用此替代方法 配对您的手表。(Watch)
第 2 步:选择设置为新设备(New Device)或从备份恢复(Restore)
如果这是您的第一个Apple Watch,那么您可以选择设置为新 Apple Watch(Set Up as New Apple Watch)。如果您是从以前的Apple Watch升级并想要传输所有应用程序和设置,您应该选择从备份恢复(Restore from Backup)。
如果在设置过程中出现提示,您还应该同意将Apple Watch更新到最新版本的 watchOS。您还必须选择佩戴手表的手腕。
第 3 步:使用您的 Apple ID 登录
接下来,系统可能会提示您输入Apple ID和密码。如果您手头有凭据,则应该花时间输入您的Apple ID密码。如果您还没有准备好输入您的Apple ID,您可以随时使用Apple Watch应用登录。
- 打开 Apple Watch 应用。
- 选择常规(General)。
- 选择Apple ID。
- 使用您的Apple ID凭据登录。
您可能想跳过此步骤,但某些功能需要您登录 iCloud。
第 4 步:设置激活锁
在Apple Watch配对过程中,您应该在Watch上设置激活锁。(Activation Lock)如果您放错地方,它会帮助您找到您的手表(Watch)。更重要的是,它会锁定您的手表(Watch),因此如果您的手表被盗, 小偷就无法转售您的手表。(Watch)
如果您的 iPhone 已经配置了“查找”(Find My),那么Apple Watch将使用这些设置。您只需输入您的Apple Id凭据即可继续。如果您没有在 iPhone 上启用“查找”(Find My),则必须为两台设备打开激活锁(Activation Lock)。
第 5 步:配置您的 Apple Watch
在此步骤中,您可以更改Watch与您的 iPhone 共享的设置。Apple会自动为您的 iPhone 开启定位(Location) 服务(Services)、Wi-Fi 通话(Wi-Fi Calling)和诊断,但您可以根据需要禁用它们。您还可以选择启用Siri、添加路线(Route)跟踪以及更改Apple Watch使用的文本大小。
第 6 步:添加密码
您可以选择添加密码(a passcode),以防止Apple Watch被窥探或被盗或丢失。
- 选择创建(Create a Passcode)密码为Apple Watch创建密码。
- 如果您想跳过此步骤,请选择 不添加密码。(Don’t Add Passcode)
- 如果您选择使用密码,请输入四位数密码或选择添加长密码(Add a Long Passcode)以添加长于四位数的密码。
如果您选择不在Apple Watch上设置密码,您可能无法使用Apple Pay等功能。
第 7 步:选择功能
接下来,您将配置自动更新、SOS和您的首选活动设置等功能。如果您在 iPhone 上使用数字钱包,您还可以配置Apple Pay 。在Apple Watch的蜂窝网络型号上,系统会提示您设置蜂窝网络连接。
第 8 步:添加应用程序
在最后一个设置步骤中,您可以选择安装与Apple Watch兼容的所有应用程序。
- 选择全部(Install All)安装以在您的 iPhone 上安装所有可用的 watchOS 应用程序
- 如果您不想在 iPhone 上安装所有可用的 watchOS 应用程序,请选择稍后。(Later)
如果您选择不安装所有可用的应用程序,您可以在以后单独添加它们。
第 9 步:等待您的设备同步
最后但同样重要的是,您需要将Apple Watch与 iPhone 同步以保存所有设置并安装应用程序。请耐心等待,因为同步过程可能需要一段时间,具体取决于您拥有多少数据和应用程序。在此过程中,请务必将Apple Watch放在 iPhone 附近。同步结束后,您会听到提示音并感受到Apple Watch发出的轻柔触觉嗡嗡声。
How to Pair Apple Watch to a New Phone
Have a new Apple Watch and need hеlp setting it up? We’re herе to help. For ѕtarters, уou’ll want to find a comfy place to work and set aside about 30 minutes.
You’ll first have to connect your Apple Watch to your phone, and then you’ll need to configure a few of the necessary settings. Once you’re settled in and ready to go, scroll down for step-by-step instructions.
Before You Start
To pair and configure your Apple Watch, you’ll need an iPhone with the latest version of iOS. You’ll also need to make sure that your iPhone has Bluetooth turned on and that it’s connected to Wi-Fi or a cellular network.
You can find these settings in Control Center. Last but not least, you should make sure both your Apple Watch and your iPhone are fully charged.
Step 1: Initiate the Pairing
When you bring a new Apple Watch into the vicinity of an iPhone, the iPhone will recognize it as a new device and prompt you to pair it. This auto-detection simplifies the pairing process. Just remember to keep your Apple Watch, and iPhone close together while you pair the two devices. If your iPhone is in a charging cradle across the room, the pairing process will fail.
- Turn on your Apple Watch by pressing and holding the side button until the Apple logo appears.
- Place your Apple Watch near your iPhone.
- A Use your iPhone to set up this Apple Watch message should appear on your iPhone. Note: If you don’t see this message, then you’ll need to initiate the pairing process by opening the Watch app on your iPhone, then select All Watches, and select Pair New Watch.
- Select Continue.
- Select Set Up for Myself if this is your personal Apple Watch.
- Or Select Set Up for a Family Member if the Watch belongs to a family member.
- Hold your iPhone camera over the animation on your Watch.
- Center the Watch animation in the center of the camera viewfinder on your iPhone.
- If successful, you will see a message appear that your Apple Watch is paired.
Apple relies on the iPhone camera to pair your Watch with your iPhone. If you can’t use the camera, you can select Pair Apple Watch Manually, then follow the prompts to pair your Watch using this alternative method.
Step 2: Choosing to Set Up as New Device or Restore From a Backup
If this is your first Apple Watch, then you can select Set Up as New Apple Watch. If you’re upgrading from a previous Apple Watch and want to transfer all your apps and settings, you should select Restore from Backup.
If prompted during the setup process, you should also agree to update your Apple Watch to the latest version of watchOS. You also will have to select which wrist you will wear your Watch on.
Step 3: Sign in with your Apple ID
Next, you may be prompted to enter your Apple ID and password. If you have your credentials handy, you should take the time to enter your Apple ID password. If you aren’t ready to enter your Apple ID, you can always sign in later using the Apple Watch app.
- Open the Apple Watch app.
- Select General.
- Select Apple ID.
- Use your Apple ID credentials to sign in.
You may be tempted to skip this step, but some features require you to sign in to iCloud.
Step 4: Setup Activation Lock
You should set up Activation Lock on your Watch during the Apple Watch pairing process. It’ll help you find your Watch if you misplaced it. More importantly, it’ll lock your Watch so a thief cannot resell your Watch if it was stolen.
If your iPhone already has Find My configured, then the Apple Watch will use those settings. You’ll only have to enter your Apple Id credentials to continue. If you don’t have Find My enabled on your iPhone, you’ll have to turn on Activation Lock for both devices.
Step 5: Configure Your Apple Watch
In this step, you get to change the settings the Watch shares with your iPhone. Apple automatically turns on Location Services, Wi-Fi Calling, and Diagnostics for your iPhone, but you can disable them if you want. You also can choose to enable Siri, add Route tracking, and change the text size used by Apple Watch.
Step 6: Add a passcode
You can choose to add a passcode to keep your Apple Watch secure from prying eyes or in case of theft or loss.
- Select Create a Passcode to create a passcode for Apple Watch.
- Select Don’t Add Passcode if you’d rather skip this step.
- If you choose to use a passcode, enter a four-digit passcode or select Add a Long Passcode to add a passcode longer than four digits.
If you choose not to have a passcode on your Apple Watch, you may not be able to use features like Apple Pay.
Step 7: Choose features
Next, you’ll configure features like automatic updates, SOS, and your preferred activity settings. You also can configure Apple Pay if you use the digital wallet on your iPhone. On cellular models of the Apple Watch, you’ll be prompted to set up the cellular connection.
Step 8: Add Apps
In one of the last setup steps, you can choose to install all apps that are compatible with Apple Watch.
- Select Install All to install all available watchOS apps on your iPhone
- Select Later if you’d rather not install all of the available watchOS apps on your iPhone.
If you choose to not install all the available apps, you can add them individually at a later time.
Step 9: Wait for your devices to sync
Last but not least, you’ll need to sync your Apple Watch with your iPhone to save all the settings and install the applications. Be patient, as the syncing process may take a while depending on how much data and apps you have. Be sure to keep your Apple Watch near your iPhone during this process. When syncing is over, you will hear a chime and feel a gentle haptic buzz from your Apple Watch.