将Beats 耳塞或耳机(Beats earbuds or headphones)与您的设备配对可能会很棘手。该过程因Beats(Beats)设备的型号和设备的操作系统而异。
本教程重点介绍将 Beats 耳塞、入耳式耳机和头戴式耳机(pairing Beats earbuds, earphones, and headphones)与Apple和非Apple手机和电脑配对的步骤。
如何将Beats Wireless 耳机(Beats Wireless Headphones)或耳塞(Earbuds)置于配对模式(Pairing Mode)
您的Beats设备必须可被发现才能连接到您的智能手机或计算机。请按照以下步骤将Beat耳机或耳塞置于配对模式。
将 Beats Fits Pro 配对模式
- 将Beats Fit Pro耳机放入充电盒中并合上充电盒。
- 将Beats Fit Pro靠近您的 iPhone/iPad/iPod touch，然后打开盒盖。您的设备应自动检测您的 Beats 并显示配对说明。
如果您使用Android设备，或者您的 iPhone/iPad/iPod touch 无法自动检测Beats Fit Pro，请保持保护壳打开，然后手动将其置于配对模式 - 请参阅步骤 #3。
- 按住充电盒上的
系统按钮 3-5 秒。(System)
- 当充电盒上的LED开始闪烁白光
时，松开系统按钮。(System)
将Beats Fits Flex置于配对模式(Pairing Mode)
- 将Beats Flex耳机靠近手机或计算机。
- 按住耳机上的
电源按钮 3-5 秒。(Power)
- 当耳机的 LED(’ LED)指示灯闪烁时松开电源(Power)按钮。
将Beats Studio Buds置于配对模式(Pairing Mode)
打开充电盒盖，将Beats Studio Buds靠近您的 iPhone、iPod touch 或 iPad。您的设备应自动检测Beats并显示配对卡。
要使非 Apple 设备可以发现Beats Studio Buds ，请按住(Beats Studio Buds)系统(System)按钮直至LED闪烁。
将Powerbeats Wireless 耳机(Powerbeats Wireless Earphones)置于配对模式(Pairing Mode)
- 按住左耳塞上的 电源按钮可打开(Power)Power Beats。
- 要激活配对模式，请按住电源(Power)按钮直至LED指示灯闪烁白光。
将Powerbeats Wireless 耳机(Powerbeats Wireless Earphones)置于配对模式(Pairing Mode)
按住电源(Power)按钮至少五秒钟。当指示灯闪烁时松开按钮。
将 Powerbeats Pro 置于配对模式
将(Place)两个Powerbeats Pro耳机放入充电盒中，然后打开盖子。将无线耳塞放在距离（解锁的）iPhone/iPad 两英寸以内，然后按照配对卡上的说明进行操作。
要与Mac(Mac)和非 Apple 手机或电脑配对，请按住系统(System)按钮直至LED闪烁。
将BeatsX 耳机(BeatsX Earphones)置于配对模式(Pairing Mode)
按住(Press)BeatsX耳机的电源(’ Power)按钮至少五秒钟，直到其LED指示灯闪烁。
将 Beats Solo3 置于配对模式
将耳机放在距离已解锁的 iPhone 2 英寸以内，按下电源(Power)按钮，然后按照配对卡上的说明进行操作。
要与Mac(Mac)和非 Apple蓝牙(Bluetooth)设备配对，请按住Beats Solo3 电源(Beats Solo3 Power)按钮五秒钟。
当耳机处于配对模式且可发现时，
电源按钮下方的电量计 LED 指示灯(Fuel Guage LED)会闪烁。
将 Beats Solo2 置于配对模式
按住Beats Solo2(Beats Solo2)左耳罩上的 b 按钮两秒钟，使耳机进入配对模式。
将 Beats Solo Pro 置于配对模式
展开Beats Solo Pro，将其靠近已解锁的 iPhone/iPad/iPod touch，然后按照配对卡上的说明进行操作。
或者，展开耳机，然后按下左耳罩上的模式(Mode)按钮至少五秒钟。
将 Beats Studio3 置于配对模式
按住电源按钮五秒钟，当(Power)燃油表(Fuel Guage)指示灯闪烁时松开按钮。
如果您使用 iOS 设备，请将蓝牙(Bluetooth)耳机靠近 iPhone，然后点击配对卡上的
“连接” 。(Connect)
将 Beats 耳塞(Pair Beats EarBuds)或耳机(Headphones)与您的手机
配对
一旦您的 Beats 被发现，您就可以轻松地将它们连接到任何支持蓝牙的智能手机。
将 Beats 耳机(Pair Beats Headphones)或耳塞(Earbuds)与 iPhone/iPad/iPod touch
配对
iPhone/iPad/iPod touch 自动检测Beats耳塞或耳机。但是，您必须在 iPhone、iPad 或 iPod touch 上批准配对请求才能连接和使用Beats。
- 点击(Tap Connect)配对卡上的“连接”，然后等待 5-10 秒，让Beats耳机连接到您的设备。
- 您将看到自定义通知和Siri公告的选项。选择“播报来电(Announce Calls)和通知” ，选择(Notifications)Siri将播报通知的应用程序，然后点击“继续”(Continue)。
(Tap Customize)如果您不希望Siri宣布来电和通知，
请点按“自定义” ，然后选择“稍后”。
- 点按“完成”(Tap Done)即可开始使用您的 Beats 入耳式耳机/头戴式耳机。
将 Beats 耳塞(Pair Beats Earbuds)或耳机(Headphones)与 Android
配对
将 Beats 靠近Android手机，并将耳塞式耳机或耳机置于配对模式。
- 打开手机的蓝牙(Bluetooth)设置菜单，启用蓝牙(Bluetooth)，然后在“可用设备”部分中选择您的 Beats。如果您在可发现设备列表中没有找到您的耳机/耳塞，请点击“扫描”(Scan)并再次检查。
- (Tap Pair)点击“蓝牙配对请求”卡上的配对。当Beats(Beats)与手机成功配对
时，您将看到一条“已连接(Connected)以进行通话和音频”消息。
(Pair Earbuds)使用Beats 应用程序(Beats App)配对耳塞或耳机(Headphones)（仅限Android）
Beats应用程序允许您将Beats产品连接到您的Android设备。您还可以使用该应用程序更新您的Beats earbuds/headphones或自定义其功能和设置。
Beats 应用程序可与selected Beats earbuds/headphonesAndroid Nougat 7.0 （或更高版本）的手机配合使用。
- 从 Google Play 商店(Beats app from the Google Play store)安装Beats 应用程序，接受使用条款并授予蓝牙(Bluetooth)权限。
- 在下一页上
选择您的Beats产品，然后按照屏幕上的说明将耳塞/耳机置于配对模式。(Beats)
- 点击设备显示屏顶部的
“Beats Discovered”通知。(Beats Discovered)
- 点击(Tap Pair)“蓝牙配对请求”卡上的“配对”以连接您的 Beats。
- 根据您的Beats产品，您会收到选择如何结束耳机/耳塞式通话的提示。
Pair Beats Earbuds/Headphones与Mac配对(Mac)
将您的 Beats 置于配对模式并按照以下步骤操作。
- 选择Mac 菜单栏(Mac’s menu bar)上的 Apple 徽标，然后选择Apple菜单上的(Apple)系统设置(System Settings)（或系统(System) 偏好设置(Preferences)）。
- 打开蓝牙(Bluetooth)菜单（位于侧边栏）并打开蓝牙(Bluetooth)。
- 滚动到“附近的设备(Devices)”部分，然后选择Beats 旁边的
“连接” 。(Connect)
您的 Beats 应在 3-5 秒内与您的Mac配对。(Mac)您会看到一个弹出窗口，询问您是否要在耳塞/耳机上
设置Siri语音识别。(Siri)
- 选择“启用”(Select Enable)以激活Siri，或选择“取消”以在没有(Cancel)Siri 的(Siri)情况下使用 Beats 。
Pair Beats Earbuds/Headphones与 Windows
配对
让您的Beats设备可被发现，并按照以下步骤将其连接到您的Windows PC。
- 打开“设置”(Settings)应用，选择侧边栏上的“蓝牙(Bluetooth)和设备”，然后打开蓝牙(Bluetooth)开关。
如果您的电脑运行Windows 10，请前往Settings > Bluetooth和设备”，然后打开“蓝牙”(Bluetooth)。
- 选择添加设备以继续。
- (Select Bluetooth)在“添加设备”弹出窗口中
选择蓝牙。
- 在可发现的设备列表中
选择您的Beats耳塞/耳机。(Beats)
- (Select Done)当您看到“您的设备已准备就绪！”时，选择“完成” 信息。
连接节拍
当您将Beats与运行 iOS 10 或更高版本的 iPhone 配对时，Apple会自动将耳塞/耳机与连接到您的 iCloud 或Apple ID帐户的其他设备配对。
如果您的Beats耳塞/耳机电量不足，则它们将无法连接或进入配对模式。为Beats(Beats)充电几分钟，然后尝试再次将其与您的设备配对。如果 Beats 无法连接到您的手机或电脑，
请重置您的Beats 。
How to Pair Beats Earbuds or Headphones to Your Phone and Computer
Pairing Beats earbuds or headphones with your device can be tricky. The process varies depending on the model of the Beats device and your device’s operating system.
This tutorial highlights steps for pairing Beats earbuds, earphones, and headphones to Apple and non-Apple phones and computers.
How to Put Beats Wireless Headphones or Earbuds in Pairing Mode
Your Beats device must be discoverable to connect to your smartphone or computer. Follow the steps below to put your Beat headphones or earbuds in pairing mode.
Put Beats Fits Pro Pairing Mode
- Place the Beats Fit Pro earbuds in the charging case and close the case.
- Bring the Beats Fit Pro close to your iPhone/iPad/iPod touch and open the case lid. Your device should auto-detect your Beats and display pairing instructions.
If you use an Android device, or your iPhone/iPad/iPod touch doesn’t auto-detect the Beats Fit Pro, keep the case open, and manually put it in pairing mode—see step #3.
- Press and hold the System button on the charging case for 3-5 seconds.
- Release the System button when the LED on the charging case starts blinking a white light.
Put Beats Fits Flex in Pairing Mode
- Hold your Beats Flex earphones close to your phone or computer.
- Press and hold the Power button on the earphones for 3-5 seconds.
- Release the Power button when the earphones’ LED indicator flashes.
Put Beats Studio Buds in Pairing Mode
Open the charging case lid and hold the Beats Studio Buds close to your iPhone, iPod touch, or iPad. Your device should automatically detect the Beats and display a pairing card.
To make Beats Studio Buds discoverable to non-Apple devices, press and hold the System button until the LED blinks.
Put Powerbeats Wireless Earphones in Pairing Mode
- Press and hold the Power button on the left earbuds to turn on your Powerbeats.
- To activate pairing mode, press and hold the Power button until the LED indicator flashes a white light.
Put Powerbeats Wireless Earphones in Pairing Mode
Press and hold the Power button for at least five seconds. Release the button when the indicator light flashes.
Put Powerbeats Pro in Pairing Mode
Place both Powerbeats Pro earbuds in the charging case and open the lid. Hold the wireless earbuds within two inches of your (unlocked) iPhone/iPad and follow the instructions on the pairing card.
To pair with Mac and non-Apple phones or computers, press and hold the System button until the LED blinks.
Put BeatsX Earphones in Pairing Mode
Press the BeatsX earphones’ Power button for at least five seconds until its LED indicator flashes.
Put Beats Solo3 in Pairing Mode
Hold the headphones within 2 inches of your unlocked iPhone, press the Power button, and follow the instructions on the pairing card.
To pair with Mac and non-Apple Bluetooth devices, press and hold the Beats Solo3 Power button for five seconds.
The Fuel Guage LED below the power button flashes when the headphones are in pairing mode and discoverable.
Put Beats Solo2 in Pairing Mode
Holding the b button on the Beats Solo2 left earcup for two seconds puts the headphones in pairing mode.
Put Beats Solo Pro in Pairing Mode
Unfold your Beats Solo Pro, hold it close to your unlocked iPhone/iPad/iPod touch, and follow the instructions on the pairing card.
Alternatively, unfold the headphones, and press the Mode button on the left earcup for at least five seconds.
Put Beats Studio3 in Pairing Mode
Press and hold the Power button for five seconds and release the button when the Fuel Guage lights flash.
If you use an iOS device, hold the Bluetooth headphones close to your iPhone and tap Connect on the pairing card.
Pair Beats EarBuds or Headphones to Your Phone
Once your Beats are discoverable, you can easily connect them to any Bluetooth-enabled smartphone.
Pair Beats Headphones or Earbuds to iPhone/iPad/iPod touch
iPhones/iPads/iPod touch automatically detect Beats earbuds or headphones. However, you must approve the pairing request on your iPhone, iPad, or iPod touch to connect and use Beats.
- Tap Connect on the pairing card and wait 5-10 seconds for Beats earphones/headphones to connect to your device.
- You’ll see options to customize notifications and Siri announcements. Select Announce Calls & Notifications, choose the apps from which Siri will announce notifications, and tap Continue.
Tap Customize and select Not Now if you don’t want Siri announcing calls and notifications.
- Tap Done to start using your Beats earphones/headphones.
Pair Beats Earbuds or Headphones to Android
Bring your Beats close to your Android phone and put the earbuds or headphones in pairing mode.
- Open your phone’s Bluetooth settings menu, enable Bluetooth, and select your Beats in the “Available devices” section. If you don’t find your headphones/earbuds on the list of discoverable devices, tap Scan and check again.
- Tap Pair on the “Bluetooth pairing request” card. You’ll see a “Connected for calls and audio” message when your Beats pairs successfully with your phone.
Pair Earbuds or Headphones Using the Beats App (Android Only)
The Beats app allows you to connect Beats products to your Android device. You can also use the app to update your Beats earbuds/headphones or customize its features and settings.
The Beats app works with selected Beats earbuds/headphones and phones running Android Nougat 7.0 (or later).
- Install the Beats app from the Google Play store, accept the usage terms, and grant Bluetooth permission.
- Select your Beats product on the next page and follow the on-screen instructions to put your earbuds/headphones in pairing mode.
- Tap the Beats Discovered notification at the top of your device’s display.
- Tap Pair on the “Bluetooth pairing request” card to connect your Beats.
- Depending on your Beats product, you’ll get a prompt to choose how to end calls on the headphones/earbuds.
Pair Beats Earbuds/Headphones to Mac
Put your Beats in pairing mode and follow these steps.
- Select the Apple logo on your Mac’s menu bar and select System Settings (or System Preferences) on the Apple menu.
- Open the Bluetooth menu (on the sidebar) and turn on Bluetooth.
- Scroll to the “Nearby Devices” section and select Connect next to your Beats.
Your Beats should pair with your Mac in 3-5 seconds. You’ll see a pop-up asking if you want to set up Siri voice recognition on the earbuds/headphones.
- Select Enable to activate Siri or Cancel to use your Beats without Siri.
Pair Beats Earbuds/Headphones to Windows
Make your Beats device discoverable and follow these steps to connect it to your Windows PC.
- Open the Settings app, select Bluetooth & devices on the sidebar, and turn on the Bluetooth toggle.
If your PC runs Windows 10, head to Settings > Bluetooth & devices, and turn on Bluetooth.
- Select Add device to continue.
- Select Bluetooth on the “Add a device” pop-up window.
- Select your Beats earbuds/headphones on the list of discoverable devices.
- Select Done when you see a “Your device is ready to go!” message.
Connect the Beats
When you pair a Beats to an iPhone running iOS 10 or later, Apple automatically pairs the earbuds/headphones with other devices connected to your iCloud or Apple ID account.
Your Beats earbuds/headphones won’t connect or enter pairing mode if they’re low on battery juice. Charge your Beats for a few minutes and try pairing it to your device again. Reset your Beats if it won’t connect to your phone or computer.
