获得Roku设备后,您需要将设备连接到Wi-Fi。这允许您设置您的Roku帐户并访问各种流媒体频道(access various streaming channels)。如果您不确定如何将Roku连接到Wi-Fi,本指南将向您展示如何连接。
您也可以通过以太网(Ethernet)将您的Roku连接到互联网。在这种情况下,您只需将以太网(Ethernet)电缆插入Roku上的(Roku)以太网(Ethernet)端口,您的设备就可以访问互联网。但是,如果您想使用无线连接,则必须配置连接,如本指南中所述。
首次
将您的Roku连接到 Wi-Fi 网络(Roku)
首次将您的Roku连接到无线网络时,您将使用Roku的引导访问向导来配置连接详细信息。
以下是您可以逐步执行此操作的方法:
- 打开您的Roku并按照设置向导进行操作。
- 当Roku要求连接到网络时,请选择“无线(Wireless)” > “设置(Set)新的无线连接”。不要选择有线(Wired),因为您要将设备连接到 Wi-Fi 网络。
- Roku将扫描附近的 Wi-Fi 网络。如果扫描后您的网络没有出现在列表中,您可以通过再次选择扫描(Scan)来重新运行扫描以查看所有网络。
- 当您在列表中看到您的无线网络名称时,选择网络。
- 等待(Wait)Roku找到与您的网络的兼容性。这应该只需要几秒钟。
- Roku将要求您输入 Wi-Fi 网络的密码。使用屏幕键盘输入密码,然后选择Connect。
- 您的Roku设备将连接到您的 Wi-Fi 网络。然后,设备将运行软件更新并安装可用更新。
现在您的Roku已通过无线互联网连接连接到互联网,您可以继续设置向导的其余部分,然后访问您喜爱的节目。享受!
(Connect Roku)设置(Set)设备
后将Roku 连接到Wi-Fi 网络(Wi-Fi Network)
如果您已经设置了Roku,并且想要将您的设备连接到另一个Wi-Fi网络,您可以从设备的“设置”(Settings)菜单中执行此操作。使用这种方法,您可以将流媒体设备连接到任意数量的网络,但一次连接一个。
请记住(Remember),当您切换到另一个网络时
,您的Roku将与您当前的网络断开连接。(Roku)
- 按(Press)Roku遥控器
上的主页(Home)按钮。
- 在屏幕上导航(Navigate)到Settings > Network > Set连接。
- 选择无线(Choose Wireless),因为您想将Roku连接到 Wi-Fi 网络。
- 在可用网络列表中选择您的新 Wi-Fi 网络。如果您没有看到您的网络,请再次选择“扫描(Scan)”以查看所有网络,再次找到附近的网络。
- 输入您的 Wi-Fi 网络密码并选择连接(Connect)。
您的Roku现在已连接到您选择的无线网络。您现在可以继续访问设备上的所有流媒体频道(access all your streaming channels)。
将Roku(Roku)连接到 Wi-Fi 网络的
问题
有时,您可能会在将 Roku 连接到 Wi-Fi 网络时遇到问题。这些问题通常是各种网络故障的结果,您可以通过应用一些简单的方法来解决大部分问题。
使用正确的 Wi-Fi 密码
Roku无法连接到网络的最常见原因是您输入了错误的 Wi-Fi 密码。您必须在设置屏幕上输入正确的网络密码,这样您的Roku才能建立连接。
如果您忘记了密码,您可以重置密码或在其他设备上查看密码((view the password on your other devices)如果您已将密码保存在那里)。
拉近你的Roku和Wi-Fi 路由器(Wi-Fi Router Closer)
由于Wi-Fi是一种无线技术,它只能在有限的区域内发挥作用。如果您将Roku和Wi-Fi路由器放置得太远,则设备之间的距离可能会导致它们无法连接。
您可以通过将Roku和路由器拉得更近来解决这个问题。这使您的Roku可以捕获从路由器发送的 Wi-Fi 信号。
重新启动您的无线路由器
您的Roku(Roku)拒绝连接到您的网络的一个可能原因是您的 Wi-Fi 路由器有一个小故障。在这种情况下,请尝试重新启动路由器,看看是否能解决您的问题。
当您重新启动路由器时,您的路由器将获得一个全新的机会来重新启动其所有服务。这有助于解决设备的许多小问题。
您可以通过在网络浏览器中访问路由器页面并选择重新启动选项来重新启动大多数路由器。如果您不确定如何操作,可以使用电源插座开关关闭并重新打开路由器。
重启你的 Roku
与您的路由器一样,您的Roku设备可能会出现小故障,从而导致连接问题。在这种情况下,请重新启动您的Roku设备以解决您的问题。
您可以通过访问Settings > System > Power > System restart > RestartRoku。
为您的 Wi-Fi 网络使用 5GHz
如果您可以使用, Roku(Roku)建议使用 5GHz 网络。这允许设备比设备在其他网络类型上的性能更好。
我们已经编写了有关如何将您的设备连接到 5GHz 网络(how to connect your device to a 5GHz network)的指南,因此请查看该指南以了解如何禁用 2.4GHz 并仅让您的路由器使用 5GHz。
使用性能更好的无线信道(Better Performing Wireless Channel)
Wi-Fi 网络使用不同的信道来传输信号。为了提高您的网络效率,请为您的网络使用最不拥塞的通道。这提高了Roku成功连接到 Wi-Fi 网络的机会。
我们有一个指南,向您展示如何找到最佳 Wi-Fi 频道(how to find the best Wi-Fi channel)。找到最佳频道后,请查看我们的指南,了解如何切换 Wi-Fi 频道(how to switch your Wi-Fi channel),以便您的网络使用最有效的频道。
让您的 Roku(Your Roku Connect)通过您的 Wi-Fi 网络
连接到世界(World)
Roku需要连接到互联网才能为您提供多媒体内容。使用上述方法,您应该能够使用您首选的无线网络将您的设备连接到互联网,并享受您的设备提供的
所有频道。(enjoy all the channels)
How to Connect Roku to Wi-Fi
Once you get a Roku device, you’ll need to connect yoυr device to Wi-Fi. This allows you to set up yоur Roku account аnd access various streaming channels. If you aren’t sure how to connect your Roku to Wi-Fi, this guide will show you how.
You can connect your Roku to the internet via Ethernet as well. In this case, you simply plug your Ethernet cable into the Ethernet port on your Roku, and your device has internet access. However, if you want to use a wireless connection, you’ll have to configure the connection, as explained in this guide.
Connect Your Roku to a Wi-Fi Network for the First Time
To connect your Roku to a wireless network for the first time, you’ll use Roku’s guided access wizard to configure the connection details.
Here’s how you can do that step-by-step:
- Turn on your Roku and follow the setup wizard.
- When Roku asks to connect to a network, choose Wireless > Set up new wireless connection. Don’t select Wired as you want to connect your device to a Wi-Fi network.
- Roku will scan for the nearby Wi-Fi networks. If your network doesn’t appear on the list after the scan, you can re-run the scan by selecting Scan again to see all networks.
- When you see your wireless network name on the list, choose the network.
- Wait for Roku to find compatibility with your network. This should only take a couple of seconds.
- Roku will ask you to enter your Wi-Fi network’s password. Type the password using the on-screen keyboard, then select Connect.
- Your Roku device will connect to your Wi-Fi network. Then, the device will run a software update and install the available updates.
Now that your Roku is connected to the internet via your wireless internet connection, you can continue with the rest of the setup wizard and then access your favorite shows. Enjoy!
Connect Roku to a Wi-Fi Network After You’ve Set Up the Device
If you’ve already set up your Roku and want to connect your device to another Wi-Fi network, you can do so from the device’s Settings menu. Using this method, you can connect your streaming device to as many networks as you want, but one at a time.
Remember that your Roku will disconnect from your current network when switching to a different one.
- Press the Home button on your Roku remote control.
- Navigate to Settings > Network > Set up connection on your screen.
- Choose Wireless since you want to connect your Roku to a Wi-Fi network.
- Select your new Wi-Fi network on the available networks list. In case you don’t see your network, find the nearby networks again by choosing Scan again to see all networks.
- Type your Wi-Fi network’s password and select Connect.
Your Roku is now connected to your chosen wireless network. You can now continue to access all your streaming channels on your device.
Issues Connecting Roku to a Wi-Fi Network
Sometimes, you may experience problems connecting your Roku to a Wi-Fi network. These issues are usually the result of various network glitches, and you can fix most of these issues by applying a few easy methods.
Use the Correct Wi-Fi Password
The most common reason your Roku doesn’t connect to your network is that you’ve entered the wrong Wi-Fi password. You must enter the correct network password on the setup screen so your Roku can establish a connection.
If you’ve forgotten your password, you can reset it or view the password on your other devices if you’ve saved it there.
Bring Your Roku and Wi-Fi Router Closer
Since Wi-Fi is a wireless technology, it only functions in a limited area. If you’ve placed your Roku and your Wi-Fi router too far apart, the distance between the devices may be causing them not to connect.
You can fix that by bringing both your Roku and your router closer. This allows your Roku to catch the Wi-Fi signals sent from your router.
Reboot Your Wireless Router
A possible reason your Roku refuses to connect to your network is that your Wi-Fi router has a minor glitch. In this case, try rebooting your router and see if that fixes your issue.
When you reboot the router, your router gets a fresh new chance to restart all its services. This helps fix many minor problems with the device.
You can reboot most routers by accessing the router’s page in your web browser and choosing the restart option. If you aren’t sure how to do that, you can use the power socket switch to turn your router off and back on.
Restart Your Roku
Like your router, your Roku device may have a minor glitch, causing connectivity issues. In this case, reboot your Roku device to resolve your issue.
You can reboot your Roku by accessing Settings > System > Power > System restart > Restart.
Use 5GHz for Your Wi-Fi Network
Roku recommends using a 5GHz network if one is available to you. This allows the device to perform better than if the device was on another network type.
We’ve written a guide on how to connect your device to a 5GHz network, so check that out to learn how to disable 2.4GHz and only make your router use 5GHz.
Use a Better Performing Wireless Channel
Wi-Fi networks use different channels to transmit signals. To improve your network’s efficiency, use the least congested channel for your network. This improves the chances of your Roku connecting to your Wi-Fi network successfully.
We have a guide that shows you how to find the best Wi-Fi channel. Once you’ve found the best channel, check out our guide on how to switch your Wi-Fi channel, so your network uses the most efficient channel.
Let Your Roku Connect to the World Through Your Wi-Fi Network
Roku needs to connect to the internet to serve you with multimedia content. Using the methods outlined above, you should be able to hook your device up to the internet using your preferred wireless network and enjoy all the channels that your device has to offer.