AirPods 是市场上最先进的蓝牙(Bluetooth)耳机。这些设备以其他耳机很少能做到的方式融合了可用性和便利性，但它们都存在一个特殊问题：声级通常太低。
如果您发现您的 AirPods 声音不足以让您听到您最喜欢的播客或播放最好的歌曲，这里有一些方法可以让它们变得更响亮。
如何让你的 AirPods 更响亮
有多种清洁 AirPods 的方法。我们将从最简单的开始。
清洁你的 AirPods(Clean Your AirPods)
AirPods 失去音量的最常见原因是扬声器外壳内的堆积物。耳垢(Ear)、棉绒和普通灰尘会积聚并阻碍音量清晰通过。
清洁 AirPods(clean your AirPods)时，请确保不要使用任何潮湿或潮湿的物品。避免(Avoid)使用纸巾或纸巾，因为这实际上会导致设备内部堆积更多。最好的选择是使用棉签或旧的软毛牙刷轻轻清洁AirPods。
确保(Make)避免使用可能损坏 AirPods 的尖锐物品。轻轻擦洗扬声器外壳和进入耳朵的部分以去除任何耳垢，然后再次测试音量。您可能会惊讶于影响音量水平所需的耳垢很少。
关闭低功耗模式(Turn Off Low Power Mode)
低功耗模式(Low power mode)通过在大多数应用程序中禁用后台刷新并调整许多其他设置来延长手机的使用寿命。但是，它也可以通过更改设备可以产生的最大音量来影响手机的音量输出。
如果您的手机处于低功耗模式，并且您的 AirPods 没有应有的声音，请禁用低功耗模式。这将使您的电池消耗更快，但会提高音频质量并增加 AirPods 的音量。
重新校准您的 AirPods(Recalibrate Your AirPods)
有时，您的 AirPods 可能会在对音量进行过多调整后失去校准。好消息是它很容易修复。首先(First)，开始在 AirPods 上播放音乐，然后一直调低音量，直到听不到任何声音。在您的 AirPods 仍在耳中的情况下，从右上角向下滑动以访问控制面板(Control Panel)并禁用蓝牙。
重新开始(Start)播放音乐。此时，它应该来自 iPhone 的扬声器。再一次，把音乐调低。完成此操作后，重新连接您的 AirPods。等待(Wait)确认声音，然后再次播放音乐，调整音量直到达到舒适的水平。
检查音频平衡(Check the Audio Balance)
您的 AirPods 可能没有您想要的那么响亮的原因之一是由于平衡问题。当您将手机置于低功耗模式时，有时会出现此问题。要检查这一点，请打开设置(Settings)>辅助功能(Accessibility)>Audio/Visual并查找平衡(Balance)滑块。
滑块的一侧有一个 L，另一侧有一个 R，中间有一个滑动控件。如果滑块没有完美定位在中间，一个AirPod会比另一个响亮。要更正此问题，请将滑块移回栏的中心。
在声音设置中调整均衡(Adjust Equalization in Sound Settings)
数字(Digital)音乐使用称为 EQ 或均衡的东西来帮助改善(improve the sound)给定歌曲的声音。这有助于消除歌曲中的瑕疵，为听众提供更好的体验。但是，EQ 也会影响 AirPods 的音量。
打开设置(Settings)>音乐(Music)并向下滚动，直到看到播放(Playback)标题。点击EQ并确保它设置为关闭。(Off. )确认 EQ 已禁用后，再次测试 AirPods 的音量。
关闭安全限制(Turn Off Safety Limits)
由于过响音乐的潜在破坏性影响，iPhone 有几个内置的安全限制来限制最大音量输出。关闭此限制器有助于纠正 AirPods 最大音量的问题。
要更改此设置，请打开设置(Settings )>声音和触觉( Sound & Haptics )>耳机安全(Headphone Safety )，然后点击减少响亮的声音(Reduce Loud Sounds)滑块。这样做会导致设置下方出现一个滑块，以及每个音量级别的说明。
例如，默认音量为 85 分贝，或与繁忙的城市交通一样响亮。90 分贝的声音和摩托车一样大，以此类推。调整(Adjust)此滑块以设置您感到舒适的最大耳机音量。这将有助于确保您的 AirPods 以可听级别播放音乐。
将您的 AirPods 恢复出厂设置(Factory Reset Your AirPods)
如果一切都失败了，您可以将 AirPods 恢复出厂设置作为最后的手段。这应该可以纠正除实际硬件损坏之外的所有性能问题，但这意味着您必须重新连接设备并更改 AirPods 的任何自定义设置。
将两个AirPods放入外壳中，合上盖子并等待 30 秒。打开盖子，然后前往“设置”(Settings) > “蓝牙(Bluetooth)”，然后点击 AirPods 旁边的信息图标。点击忘记此设备(Forget This Device)。在盖子仍然打开的情况下，按住外壳上的配对按钮 15 秒。
状态指示灯将呈琥珀色闪烁。将保护套靠近手机，等待配对提示出现在屏幕上。重新配对并重新连接您的 AirPods。此时，它们已完全重置，应按预期执行。
AirPods 拥有当今市场上任何蓝牙设备中最好的音频质量和舒适度，尤其是在您拥有一组(Bluetooth)AirPod Pro(AirPod Pros)的情况下。希望现在您的设备达到您想要的音频级别。
How to Make Your AirPods Louder
AirPods are the most advanced Bluetooth headphones on the market. The devices blend usability and convenience in a way few other headphones do, but they all suffer from one particular problem: the sоund level is often too lоw.
If you discover your AirPods aren’t loud enough for you to hear your favorite podcasts or jam out to the best songs, here are a few methods to make them louder.
How to Make Your AirPods Louder
There are several methods to clean your AirPods. We’ll start with the simplest.
Clean Your AirPods
The most often reason AirPods lose their volume is because of buildup inside the speaker housing. Ear wax, pocket lint, and plain dust can build up and block the volume from coming through clearly.
When you clean your AirPods, make sure you don’t use anything wet or damp. Avoid using a paper towel or tissue, as this can actually cause more buildup inside the device. The best option is to take a cotton swab or an old, soft-bristled toothbrush and gently clean the AirPods.
Make sure to avoid using anything sharp that might damage your AirPods. Gently scrub the speaker housing and the part that goes into your ear to remove any ear wax and then test the volume again. You might be surprised how little ear wax it takes to impact volume level.
Turn Off Low Power Mode
Low power mode extends the life of your phone by disabling background refresh in most apps and adjusting a number of other settings. However, it can also impact your phone’s volume output by changing the maximum volume the device can produce.
If your phone is in low power mode and your AirPods are not as loud as they should be, disable low power mode. This will make your battery drain faster, but it will improve audio quality and increase the volume of your AirPods.
Recalibrate Your AirPods
Sometimes, your AirPods can lose calibration after too many adjustments to the volume level. The good news is that it’s easy to fix. First, start playing music on your AirPods and then turn your volume all the way down until you hear nothing. With your AirPods still in your ears, swipe down from the upper-right corner to access the Control Panel and disable Bluetooth.
Start playing music again. At this point, it should come from your iPhone’s speakers. Once more, turn the music all the way down. After you do this, reconnect your AirPods. Wait for the confirmation sound and then play music once more, adjusting the volume until it’s at a comfortable level.
Check the Audio Balance
One reason your AirPods may not be as loud as you want is due to a problem with the balance. This problem sometimes arises when you put your phone into low power mode. To check this, open Settings > Accessibility > Audio/Visual and look for the Balance slider.
The slider will have an L on one side and an R on the other, with a sliding control in the center. If the slider is not perfectly positioned in the middle, one AirPod will be louder than the other. To correct this issue, move the slider back into the center of the bar.
Adjust Equalization in Sound Settings
Digital music uses something called EQ, or equalization, to help improve the sound of a given song. This helps remove imperfections from the songs to provide a listener with a better experience. However, EQ can also impact the volume level of your AirPods.
Open Settings > Music and scroll down until you see the Playback header. Tap EQ and ensure it is set to Off. After you have checked that EQ is disabled, test the volume level of your AirPods again.
Turn Off Safety Limits
Due to the potential damaging effects of too-loud music, the iPhone has several built-in safety limitations to limit the maximum volume output. Turning off this limiter can help correct problems with the AirPods’ maximum volume.
To change this, open Settings > Sound & Haptics > Headphone Safety and tap the Reduce Loud Sounds slider. Doing so causes a slider to appear beneath the setting, along with an explanation of what each volume level is.
For example, the default volume is 85 decibels, or as loud as heavy city traffic. 90 decibels is as loud as a motorcycle, and so on. Adjust this slider to set the maximum headphone volume you are comfortable with. This will help ensure your AirPods play music at audible levels.
Factory Reset Your AirPods
If all else fails, you can factory reset your AirPods as a final resort. This should correct any and all performance issues short of actual hardware damage, but it means you’ll have to reconnect the devices and change any custom settings you have for your AirPods.
With both AirPods inside the case, close the lid and wait 30 seconds. Open the lid, then go to Settings > Bluetooth and tap the information icon beside your AirPods. Tap Forget This Device. With the lid still open, press and hold the pairing button on the case for 15 seconds.
The status light will blink amber. Move the case close to your phone and wait for the pairing prompt to appear on screen. Re-pair and reconnect your AirPods. At this point, they have been completely reset and should perform as intended.
AirPods boast some of the best audio quality and comfort of any Bluetooth device on the market today, especially if you have a set of AirPod Pros. Hopefully now your devices reach the audio level you want.
