您(Are)对从 Windows 10升级到Windows 11感到兴奋吗?(Windows 11)微软(Microsoft)不久前向所有满足最低系统要求的计算机 推出了Windows 11自动更新。(Windows 11)
但是,如果您的计算机尚未收到更新或您的计算机无法连续访问 Internet ,您可能仍希望使用媒体创建工具下载新版本的Windows 。
首先检查更新
在下载 Windows 之前,请检查Windows 更新(Windows Update)部分以查看它是否已可用于您的 PC,而您只是错过了通知。您可以在Windows 10上执行此操作,方法是在“开始”菜单(Start Menu)中搜索检查更新(check for updates),然后选择最佳匹配。
如果更新不可用,您需要下载Windows 11。首先验证您的 PC 是否满足下载新操作系统的最低系统要求。
检查您的 PC 的最低健康(Minimum Health)要求
有几种方法(several methods)可以检查您是否可以在 PC 上安装Windows 11 。但是,最简单的方法是使用PC Health Check 应用程序(PC Health Check app)。下载(Download)、安装并运行程序,然后单击立即检查(Check now)按钮。
该应用程序将帮助您检查系统是否准备好运行Windows 11,其中包括检查支持的CPU、处理器上的内核数量及其时钟速度以及TPM(受信任的平台模块(Trusted Platform Module))等。除非您的 PC 很旧,否则它应该能够满足所有要求并运行Windows 11。
在许多情况下, PC运行状况检查(Health Check)会将TPM列为缺失要求。但是,您的硬件可能具有TPM功能,您只需在BIOS中启用它。请注意,您还需要从BIOS启用安全启动(enable Secure Boot)— UEFI(统一可扩展固件接口(Unified Extensible Firmware Interface))功能。
使用(Use)Windows 11媒体创建工具(Media Creation Tool)下载Windows 11(Download Windows 11)
验证您的 PC 可以运行Windows 11后,您现在可以使用媒体创建工具在您的 PC 上下载Windows并创建可启动的USB驱动器或DVD。
- 转到媒体创建工具的下载页面(Download page)。
- 您将找到三个选项:Windows 11安装助手(Installation Assistant)、创建 Windows 11(Create Windows 11) 安装媒体(Installation Media)和下载 Windows 11(Download Windows 11) 磁盘映像(Disk Image)( ISO )。选择Windows 11 安装媒体下的(Windows 11 Installation Media)立即下载(Download Now )按钮。
- 双击(Double-click)刚刚下载的exe文件,点击接受(Accept)许可条款。
- 在下一个屏幕上,您需要选择要使用的语言( Language )和版本。(Edition)保持选中使用此 PC 的推荐选项(Use the recommended options for this PC )复选框,然后单击下一步(Next)。
- 此时,您需要选择是要创建可启动的USB闪存驱动器还是稍后 可以刻录到DVD的(DVD)ISO文件。(ISO)
如果您选择USB闪存驱动器,请确保在继续之前已将具有至少 8GB 可用空间的空白USB闪存驱动器插入您的 PC。(USB)如果您选择ISO文件,您现在无需担心其他任何事情。选择后,单击Next。
- 如果您选择USB闪存驱动器选项,则需要在下一个屏幕上选择要使用 的USB设备。(USB)
选择一个设备,然后单击下一步(Next)。该工具将开始下载Windows 11并自动创建安装介质。确保(Make)您的互联网连接稳定,因此下载不会中断。
或者,如果您选择下载ISO文件,请确保您有一张空白DVD,您可以在下载完成后将ISO文件刻录到该 DVD。(ISO)选择ISO(ISO)文件下载选项后单击下一步(Next)按钮时,您需要选择下载位置。选择一个文件夹并让该工具完成下载Windows ISO。
- 如果您在上一步中选择了USB方法,则您现在可以在 PC 上安装或重新安装 Windows 11。但是,如果您选择下载ISO,则需要将ISO刻录在空白DVD上。
媒体创建工具完成ISO下载后,它将显示ISO的存储位置,并为您提供打开 DVD 刻录机(Open DVD Burner)的选项。当您单击Open DVD Burner选项时,它只会显示您需要在命令提示符(Command Prompt)中运行以刻录ISO的命令。
记(Note)下命令并执行它。或者,如果您更喜欢图形化方法而不是使用命令提示符(Command Prompt),只需选择确定(OK)并退出程序。
- 如果您在上一步中使用了命令提示符(Command Prompt),则可以跳到下一部分。如果您想使用光盘刻录机的图形界面,请转到您刚刚下载新Windows ISO的文件夹。右键单击(Right-click)ISO文件(ISO)并选择刻录光盘映像(Burn disc image)。
- 选择(Select)合适的光盘刻录机,然后选择刻录(Burn )按钮。保持选中“刻录后验证光盘”选项。(Verify disc after burning)
从新安装介质(New Installation Media)升级到 Windows 11
在您的 PC 上打开安装媒体并双击setup.exe以启动安装向导。在第一个屏幕上选择下一步(Next)按钮。接下来,选择接受(Accept)以接受许可条款。
您现在将看到“准备安装(Ready to install )”屏幕,向导将在该屏幕上为您提供它将执行的操作的摘要。例如,在这种情况下,它会显示您已选择安装 Windows 11 Pro(Install Windows 11 Pro)并保留个人文件和应用程序(Keep personal files and apps)。如果您愿意,您可以更改要保留(Change what to keep)的内容,或选择安装(Install )按钮开始安装。
让向导运行升级并重新启动。该过程完成后,您应该已准备好使用Windows 11并探索其新功能。
全新安装 Windows 11
创建安装媒体后,安装 Windows 11 的干净副本的(installing a clean copy of Windows 11)过程与任何其他方法相同。您引导到安装介质并按照安装向导中的说明进行操作。
媒体创作工具让一切变得简单
媒体(Media)创建工具使创建可启动安装媒体的过程无缝。它速度很快,并且有屏幕上的说明,即使对于初学者来说也很简单。
请注意,当您安装全新的Windows 11副本时,您还应提供购买该副本时收到的Windows 11产品密钥。(Windows 11)如果您没有,可以在安装时跳过输入产品密钥,稍后激活 Windows 11 。(activate Windows 11)
How to Download Windows 11 Using the Media Creation Tool
Are you excited to upgrade to Windows 11 from Windows 10? Microsoft rolled out the Windows 11 automatic update to all computers that met the minimum ѕystem requirements a while ago.
However, you may still want to download the new version of Windows with the media creation tool if your computer hasn’t received the update yet or if you have a machine that doesn’t have continual internet access.
Check for Updates First
Before you download Windows, check the Windows Update section to see if it’s already available for your PC and you’ve just missed the notification. You can do this on Windows 10 by searching for check for updates in the Start Menu and then selecting the best match.
If the update isn’t available, you’ll need to download Windows 11. Start by verifying whether your PC meets the minimum system requirements for downloading the new operating system.
Check Your PC for Minimum Health Requirements
There are several methods to check if you can install Windows 11 on your PC. However, the easiest way is to use the PC Health Check app. Download, install, and run the program, and then click the Check now button.
The app will help you check the system’s readiness to run Windows 11, which includes checking for a supported CPU, the number of cores on the processor and its clock speed, and TPM (Trusted Platform Module), among other things. Unless your PC is ancient, it should be able to meet all requirements and run Windows 11.
PC Health Check will list TPM as a missing requirement in many cases. However, your hardware likely has TPM capabilities, and you just need to enable it in your BIOS. Note that you’ll also need to enable Secure Boot—a UEFI (Unified Extensible Firmware Interface) feature—from the BIOS.
Use Windows 11 Media Creation Tool to Download Windows 11
Once you’ve verified that your PC can run Windows 11, you can now use the media creation tool for downloading Windows on your PC and create a bootable USB drive or DVD.
- Go to the Download page for the media creation tool.
- You’ll find three options: Windows 11 Installation Assistant, Create Windows 11 Installation Media, and Download Windows 11 Disk Image (ISO). Select the Download Now button under Windows 11 Installation Media.
- Double-click on the exe file that you just downloaded and click to Accept the license terms.
- On the next screen, you’ll need to select the Language and Edition you want to use. Keep the Use the recommended options for this PC checkbox selected and then click Next.
- At this point, you’ll need to choose whether you want to create a bootable USB flash drive or ISO file that you can burn to a DVD later.
If you select the USB flash drive, make sure you’ve inserted a blank USB flash drive with at least 8GB of free space into your PC before moving forward. If you select the ISO file, you don’t need to worry about anything else for now. Once you’ve chosen, click Next.
- If you choose the USB flash drive option, you’ll need to select the USB device you want to use on the next screen.
Select a device and then click Next. The tool will start downloading Windows 11 and automatically create the installation media. Make sure your internet connection is stable, so there are no interruptions in the download.
Alternatively, if you choose to download the ISO file, make sure you have a blank DVD that you can burn the ISO file to after the download finishes. When you click the Next button after selecting the ISO file download option, you’ll be required to select a download location. Select a folder and let the tool finish downloading Windows ISO.
- If you had chosen the USB method in the previous step, you’re now ready to install or reinstall Windows 11 on your PC. However, if you had chosen to download the ISO, you’ll need to burn the ISO on a blank DVD.
Once the media creation tool completes downloading the ISO, it will show you where the ISO is stored and give you the option to Open DVD Burner. When you click on the Open DVD Burner option, it will only show you a command that you’ll need to run in the Command Prompt to burn the ISO.
Note down the command and execute it. Alternatively, if you prefer a more graphical method versus using the Command Prompt, just select OK and exit the program.
- If you used the Command Prompt in the previous step, you can skip to the next section. If you want to use the graphical interface of the disc burner, go to the folder where you just downloaded your new Windows ISO. Right-click on the ISO file and select Burn disc image.
- Select an appropriate disc burner, and select the Burn button. Keep the Verify disc after burning option checked.
Upgrade to Windows 11 from Your New Installation Media
Open the installation media on your PC and double-click on setup.exe to launch the installation wizard. Select the Next button on the first screen. Next, select Accept to accept the license terms.
You’ll now see the Ready to install screen, where the wizard will give you a summary of what it will do. For instance, in this case, it will show that you’ve chosen to Install Windows 11 Pro and Keep personal files and apps. If you prefer, you can Change what to keep, or select the Install button to start the installation.
Let the wizard run the upgrade and reboot. Once the process completes, you should be ready to use Windows 11 and explore its new features.
Clean Install Windows 11
Once you’ve created the installation media, the process of installing a clean copy of Windows 11 is the same as any other method. You boot into the installation media and follow the instructions from the installation wizard.
Media Creation Tool Makes it Easy
Media creation tool makes the process of creating bootable installation media seamless. It’s quick, and with on-screen instructions, it’s simple even for beginners.
Note that when you install a fresh copy of Windows 11, you should also provide the product key for Windows 11 that you received when you purchased the copy. If you don’t have one, you can skip entering the product key at the time of installation, and activate Windows 11 later.