如果您想知道为什么您的网络浏览器显示“您无权访问(Permission)此服务器”错误而不是您的网站或网页，那么您来对地方了。导致此问题的原因有多种，包括用户端和服务器端。我们将向您展示解决该问题的几种方法，以便您可以访问所需的网站(access your desired site)。
出现上述错误的最常见原因是您网站的服务器限制了您对该网站的访问。其他原因包括 Web 浏览器故障、VPN或代理被阻止、Web 浏览器数据损坏等。
重新启动Web 浏览器(Web Browser)以修复访问被拒绝错误(Access Denied Error)
当您收到上述错误时，您应该首先关闭并重新启动您的网络浏览器(close and relaunch your web browser)。这可以修复可能导致问题的浏览器的任何小问题。
您可以通过选择窗口右上角的 X 来关闭 Windows 上的浏览器应用程序。
您可以通过选择浏览器名称并在浏览器菜单栏中
选择“退出”(Quit)来退出 Mac 上的浏览器。(quit a browser on Mac)
完成后，打开网络浏览器并尝试访问您的网站。
重新启动您的 Windows 或Mac 计算机(Mac Computer)
如果重新启动浏览器后问题仍然存在，则您的 Windows 或Mac计算机可能存在小问题。在这种情况下，重新启动计算机即可解决这些小问题。
您可以通过打开“开始”(Start)菜单，选择“电源”(Power)图标，然后选择“重新启动”(Restart)来重新启动 Windows PC(reboot a Windows PC)。
要重新启动 Mac(reboot a Mac)，请打开Mac 左上角的Apple菜单，然后选择(Apple)“重新启动”(Restart)。
当您的计算机重新启动时，启动您的网络浏览器并打开您的网站。
检查网站的 Web 服务器问题
您的网站的服务器可能遇到问题(an issue on its servers)，导致您的浏览器显示“您无权访问(Permission)此服务器”错误。通常，当服务器限制您访问该站点时，会出现此错误，但也可能有其他原因。
在这种情况下，请联系该网站的网站管理员寻求解决方案。如果不可能，请等待站点管理员解决问题。当问题出在服务器端时，您无能为力。
关闭您的 VPN
您的VPN应用程序通过第三方服务器路由您的互联网数据，这有时可能会出现问题。这可能就是您在网络浏览器中遇到上述错误的原因。
在这种情况下，请关闭您的VPN，看看您的问题是否得到解决。您可以通过启动应用程序并关闭主屏幕上的开关来禁用VPN软件。(VPN)然后，启动您的网络浏览器并尝试访问您的网站。
如果您的网站在禁用VPN(VPN)后打开，请更改您的VPN区域，看看是否有帮助。如果不起作用，
请联系您的VPN提供商或获取新的 VPN 应用程序。(get a new VPN app)
禁用您的代理服务器
与VPN(VPN)一样，您的代理服务器通过第三方服务器传输您的互联网数据。在某些情况下，例如您的情况，这可能会出现问题。您可以关闭 Windows 或 Mac 计算机上的代理服务器，(turn off the proxy server on your Windows or Mac computer)看看是否可以解决问题。
稍后，您可以根据需要重新打开代理服务器。
在 Windows 上
- 按Windows + I
打开“设置”。
- (Select Network)在左侧边栏中
选择网络和互联网。
- 在右侧窗格中选择代理。
- 禁用自动(Automatically)检测设置选项。
- 选择使用代理服务器旁边的设置
。(Set)
- 关闭使用(Use)代理服务器选项并选择底部的
保存。(Save)
在 macOS 上
- 打开 Mac 的Apple菜单并选择“系统偏好设置”(System Preferences)。
- (Select Network)在下一页中
选择网络。
- 在左侧边栏中选择“Wi-Fi” ，在右侧窗格中
选择“高级” 。(Advanced)
- 访问代理选项卡。
- 清除“选择(Select)要配置的协议”部分中的所有复选框，然后选择底部的“确定”。
关闭 Windows 或Mac 防火墙(Mac Firewall)
您的计算机的防火墙可确保您的传出和传入网络连接的安全。但是，您的防火墙可能会错误地将您与站点的连接识别为潜在威胁，从而阻止该连接。
在这种情况下，请禁用防火墙(disable your firewall)并查看您的网站是否打开。您可以稍后重新打开防火墙。
在 Windows 上
- 打开“开始”(Start)，找到“控制面板”(Control Panel)，然后选择该实用程序。
- (Choose System)在“控制面板”中(Control Panel)选择“系统和安全”(Security)。
- 在下一页上
选择Windows Defender 防火墙。(Windows Defender Firewall)
- (Choose Turn Windows Defender Firewall)在左侧边栏中选择打开或关闭 Windows Defender 防火墙。
- 在专用(Private)网络设置和公共(Public)网络设置部分中启用关闭 Windows Defender 防火墙(Turn Off Windows Defender Firewall)（不推荐）选项。
- 选择底部的“确定”。
在 macOS 上
- 在Mac(Mac)上打开终端(Terminal)窗口。
- 在终端(Terminal)窗口中键入以下命令并按 Enter：
sudo defaults write /Library/Preferences/com.apple.alf globalstate -int 0
- 输入您的Mac密码并按Enter。您的防火墙现已禁用。
- 要在将来重新打开防火墙，请使用以下命令：
sudo defaults write /Library/Preferences/com.apple.alf globalstate -int 1
更改 Windows 或 Mac 的DNS 服务器(DNS Server)
您计算机的DNS服务器帮助网络浏览器将域名转换为 IP 地址。这些服务器可能面临中断(These servers may be facing an outage)，导致您的浏览器显示错误消息。
在这种情况下，您可以使用备用 DNS 服务器(use alternate DNS servers)来解决您的问题。这些服务器的工作方式与原始服务器的工作方式相同，不会导致支持互联网的应用程序的工作方式发生任何差异。
在 Windows 上
- 按Windows + I
启动设置。
- (Select Network)在左侧边栏中
选择网络和互联网。
- 根据右侧的网络类型选择Wi-Fi或以太网。(Ethernet)我们将选择Wi-Fi。
- (Choose Hardware)在下一页上
选择硬件属性。
- 选择(Select Edit)DNS服务器分配旁边的编辑。
- 从下拉菜单中选择手动并启用(Manual)IPv4。
- 在首选 DNS(Preferred DNS)字段中输入 8.8.8.8 ，在备用 DNS(Alternate DNS)字段中输入 8.8.4.4 。
- 选择底部的保存。
在 macOS 上
- 打开Mac上的“系统(System) 偏好设置”(Preferences)并选择“网络”(Network)。
- (Select)在左侧选择您的网络连接，然后在右侧
选择“高级” 。(Advanced)
- 打开DNS选项卡，选择现有服务器，然后选择 –（减号）符号以删除服务器。
- 选择 +（加号）并输入 8.8.8.8。然后，再次选择相同的符号并输入8.8.4.4。
- 选择底部的“确定”，然后在接下来的屏幕上
选择“应用” 。(Apply)
删除网络浏览器的浏览历史记录(Browsing History)
您的网络浏览器会保存浏览数据，例如 Cookie 和网站数据，以便您可以返回到过去的项目。有时，这些数据会损坏，导致您的浏览器不稳定。这可能就是您的浏览器应用程序中遇到“您无权访问(Permission)此服务器”问题的原因。
在这种情况下，清除浏览器数据(clear browser data)，您的问题就会得到解决。
如果您是Google Chrome用户，请打开浏览器的“设置”(Settings)窗口，然后选择“隐私(Privacy)和安全”> “清除(Clear)浏览数据”。接下来(Next)，选择要删除的项目并选择清除(Clear)数据按钮。
在Firefox浏览器中启动“设置”(Settings)，然后选择“隐私(Privacy)和安全”(Security) >“清除历史记录”(History)。选择要删除的项目并选择“确定”。
在Microsoft Edge上，打开“设置”(Settings)菜单，然后选择“隐私(Privacy)、搜索和服务”> “选择(Choose)要清除的内容”。选择要删除的项目并选择立即清除。
并且您已成功清除浏览器缓存、cookie 和其他项目。
(Reset Settings)将Web 浏览器(Your Web Browser)中的设置重置为原始默认值(Original Defaults)
如果您的问题仍未解决，请将您的网络浏览器恢复为出厂设置，以修复应用程序的配置问题。您或其他人可能在网络浏览器中错误地自定义了设置选项，导致应用程序显示错误消息。
我们已经编写了有关如何重置各种网络浏览器的(how to reset various web browsers)指南，因此请访问该指南并按照适用于您的浏览器的说明进行操作。请注意，重置时您将丢失网络浏览器中保存的所有数据。
在 Windows 和Mac Web 浏览器中打开无法访问的站点(Mac Web Browsers)
由于各种原因，您的 Windows 和Mac Web 浏览器显示“您无权访问(Permission)此服务器”。只要问题不是在服务器端产生的，您就可以使用上述方法来解决您的问题(resolve your problem)。
修复导致问题的项目后，您的网站或网页将按其应有的方式打开，以便您继续浏览。
How to Fix “You Don’t Have Permission to Access on This Server” Error
If you’re wonderіng why your wеb browѕer displays a “You Don’t Have Permission to Access on This Server” error instead of your site or web page, you’ve come to the right place. There are a few reasons, including on both the user and server sides, that cause this problem. We’ll show you a few ways to fix the issυe so you can access your desired site.
The most common reason you get the above error is that your site’s server has restricted your access to the site. Other causes include a faulty web browser, blocked VPN or proxy, corrupt web browser data, and more.
Relaunch Your Web Browser to Fix the Access Denied Error
When you get the above error, you should first close and relaunch your web browser. This fixes any minor issues with your browser which may be causing the problem.
You can close a browser app on Windows by selecting X in the window’s top-right corner.
You can quit a browser on Mac by choosing the browser name and selecting Quit in the browser’s menu bar.
When you’ve done that, open your web browser and try to access your site.
Restart Your Windows or Mac Computer
If your issue persists after relaunching the browser, your Windows or Mac machine may have a minor problem. In this case, reboot your computer to fix those minor issues.
You can reboot a Windows PC by opening the Start menu, selecting the Power icon, and choosing Restart.
To reboot a Mac, open the Apple menu in your Mac’s top-left corner and choose Restart.
Launch your web browser and open your site when your machine turns back on.
Check the Site’s Web Server Issues
Your website may be experiencing an issue on its servers, causing your browser to display a “You Don’t Have Permission to Access on This Server” error. Usually, this error appears when the server restricts your access to the site, but there may be other causes.
In this case, contact the site’s webmaster for a resolution. If that’s impossible, wait until the site admin resolves the issue. You can’t do anything when the problem is on the server’s end.
Turn Off Your VPN
Your VPN app routes your internet data through a third-party server, which can be problematic sometimes. This may be why you’re experiencing the above error in your web browser.
In this case, turn off your VPN and see if your issue is resolved. You can disable your VPN software by launching your app and turning off the toggle on the main screen. Then, launch your web browser and try to access your site.
If your site opens after disabling the VPN, change your VPN region and see if that helps. Contact your VPN provider or get a new VPN app if that doesn’t work.
Disable Your Proxy Server
Like a VPN, your proxy server transmits your internet data through a third-party server. This can be problematic in some cases, like yours. You can turn off the proxy server on your Windows or Mac computer to see if that resolves the problem.
Later, you can turn your proxy server back on if you want.
On Windows
- Open Settings by pressing Windows + I.
- Select Network & internet in the left sidebar.
- Choose Proxy on the right pane.
- Disable the Automatically detect settings option.
- Select Set up next to Use a proxy server.
- Turn off the Use a proxy server option and select Save at the bottom.
On macOS
- Open your Mac’s Apple menu and choose System Preferences.
- Select Network on the following page.
- Choose Wi-Fi in the left sidebar and Advanced on the right pane.
- Access the Proxies tab.
- Clear all the checkboxes in the Select a protocol to configure section and choose OK at the bottom.
Turn Off Your Windows or Mac Firewall
Your computer’s firewall ensures your outgoing and incoming network connections are safe. However, your firewall may have mistakenly recognized your connection to your site as a potential threat, blocking the connection.
In this case, disable your firewall and see if your site opens. You can turn your firewall back on later.
On Windows
- Open Start, find the Control Panel, and select the utility.
- Choose System and Security in Control Panel.
- Select Windows Defender Firewall on the following page.
- Choose Turn Windows Defender Firewall on or off in the left sidebar.
- Enable the Turn Off Windows Defender Firewall (not recommended) option in both the Private network settings and Public network settings sections.
- Choose OK at the bottom.
On macOS
- Open a Terminal window on your Mac.
- Type the following command in the Terminal window and press Enter:
sudo defaults write /Library/Preferences/com.apple.alf globalstate -int 0
- Type your Mac password and press Enter. Your firewall is now disabled.
- To turn your firewall back on in the future, use the following command:
sudo defaults write /Library/Preferences/com.apple.alf globalstate -int 1
Change Your Windows or Mac’s DNS Server
Your computer’s DNS servers help web browsers translate domain names to IP addresses. These servers may be facing an outage, causing your browsers to display an error message.
In this case, you can use alternate DNS servers to resolve your issue. These servers work the same way as your original ones, causing no difference in how your internet-enabled apps work.
On Windows
- Launch Settings by pressing Windows + I.
- Select Network & internet in the left sidebar.
- Choose Wi-Fi or Ethernet, depending on your network type on the right. We’ll select Wi-Fi.
- Choose Hardware properties on the following page.
- Select Edit next to DNS server assignment.
- Select Manual from the drop-down menu and enable IPv4.
- Enter 8.8.8.8 in the Preferred DNS field and 8.8.4.4 in the Alternate DNS field.
- Select Save at the bottom.
On macOS
- Open System Preferences on your Mac and select Network.
- Select your network connection on the left and choose Advanced on the right.
- Open the DNS tab, select the existing servers, and choose the – (minus) sign to remove the servers.
- Select the + (plus) sign and enter 8.8.8.8. Then, select the same sign again and enter 8.8.4.4.
- Select OK at the bottom, then choose Apply on the following screen.
Delete Your Web Browser’s Browsing History
Your web browser saves browsing data, like cookies and site data, to make it possible for you to return to your past items. Sometimes, this data goes corrupt, making your browser unstable. This may be why you’re experiencing a “You Don’t Have Permission to Access on This Server” issue in your browser app.
In this case, clear browser data, and your issue will be fixed.
If you’re a Google Chrome user, open your browser’s Settings window and choose Privacy and security > Clear browsing data. Next, select the items to delete and choose the Clear data button.
Launch Settings in the Firefox browser and select Privacy & Security > Clear History. Choose the items to delete and select OK.
On Microsoft Edge, open the Settings menu and select Privacy, search, and services > Choose what to clear. Select the items to delete and choose Clear now.
And you’ve successfully cleared your browser cache, cookies, and other items.
Reset Settings in Your Web Browser to Original Defaults
If your issue remains unresolved, bring your web browser to the factory settings, fixing issues with the app’s configuration. You or someone else may have incorrectly customized a setting option in your web browser, causing the app to display an error message.
We’ve already written a guide on how to reset various web browsers, so access that guide and follow the instructions for your browser. Note that you’ll lose all your saved data in your web browser when resetting.
Opening Inaccessible Sites in Your Windows and Mac Web Browsers
Your Windows and Mac web browsers display a “You Don’t Have Permission to Access on This Server” for various reasons. As long as the issue isn’t created on the server end, you can use the above methods to resolve your problem.
Once you’ve fixed the item causing the issue, your site or web page will open just as it should, allowing you to continue browsing.
