您的Apple Watch是否一直卡在Apple标志上？各种与软件相关的原因（例如错误、故障和损坏的系统设置）都可能导致这种情况发生。但不要惊慌。在大多数情况下，这是一个您可以快速解决的问题。
按照下面的故障排除提示列表进行操作，您应该能够将Apple Watch推过Apple标志并进入 watchOS。
强制重启 Apple Watch
强制重启(Force-restarting)（或硬重置）您的Apple Watch可以帮助解决导致设备无法工作的小技术问题。
要执行强制重启，请同时按住 Apple Watch 的Digital Crown和Side按钮最多 10 秒。
Apple标志应同时消失并重新出现。希望(Hopefully)不久之后您会看到表盘。
充电和强制重启
如果强制重启导致Apple Watch再次卡在Apple标志上，请尝试为设备充电 5-10 分钟。然后，在不将其与充电器断开连接的情况下执行另一次强制重启。
(Did)那行得通吗？如果没有，请继续进行其余的修复。
使用 Find My 播放声音
一个可以解决Apple Watch 卡住的Apple标志问题的奇怪修复方法是使用 iPhone 的Find My应用程序来“定位”设备。
首先在 iPhone 上加载Find My应用。然后，切换到“设备(Devices )”选项卡，选择您的Apple Watch，然后轻点“播放声音”(Play Sound)。
如果Apple标志继续显示在Apple Watch的屏幕上，请强制重启设备并再次点击 Find My app 上的播放声音。(Play Sound)
从 iPhone 取消配对 Apple Watch
将卡住的Apple Watch与 iPhone 取消配对是另一种可以提供帮助的修复方法。但是，该程序会将 watchOS 设备恢复为出厂设置并删除所有个人数据。
取消配对过程确实会为您的 iPhone创建Apple Watch的备份。但是由于 watchOS 设备被卡住了，这可能会也可能不会发生。如果您手头没有以前的备份，则可能会永久丢失数据。
如果你想继续，首先打开 iPhone 的Watch应用程序。然后，选择所有手表(All Watches)，点击Apple Watch旁边的信息(Info )图标，然后选择取消配对 Apple Watch(Unpair Apple Watch)。
如果这允许Apple Watch启动进入 watchOS，请再次完成配对过程(go through the pairing process again)以将其连接到您的 iPhone。
如果您在取消配对Apple Watch(Apple Watch)时遇到问题，请尝试抹掉设备上的所有内容和设置。向下滚动(Scroll)到最后的故障排除部分以获取说明。
耗尽电池并重新启动
如果您的Apple Watch继续卡在Apple标志上，请尝试耗尽电池电量。但这可能需要长达 10 小时或更长时间，具体取决于剩余电量。
电池放电后（如，您不再看到Apple标志），按住侧边(Side )按钮进行确认。如果屏幕上没有显示任何内容，请将Apple Watch连接到充电器。一旦充电充分，它应该会自动启动。
更新 Apple Watch
如果上述修复有帮助，您必须考虑立即更新您的 Apple Watch(updating your Apple Watch)。这应该会消除已知的错误，并将问题在未来再次发生的可能性降到最低。在继续之前，请将 watchOS 设备连接到其充电器。
使用 iPhone 更新 Apple Watch(Update Apple Watch Using iPhone)
在 iPhone上调出Watch应用程序。然后，转到常规(General )>软件更新(Software Update)。如果您看到列出的更新，请点击下载并安装(Download and Install)。
使用 Apple Watch 直接更新(Update Directly Using Apple Watch)
按下 Apple Watch 的Digital Crown表冠。然后，点击设置(Settings )并转到常规(General )>软件更新(Software Update)。
如果您看到列出的更新，请点击下载并安装(Download and Install)。
回退到稳定通道
您是否已在Apple Beta 软件计划中注册了您的(Apple Beta Software Program)Apple Watch？watchOS 测试版通常不稳定并引入许多问题。如果设备继续卡在Apple标志上，最好退回到稳定频道。
使用 iPhone 删除 Beta 配置文件(Remove Beta Profile Using iPhone)
在 iPhone 上打开Watch应用程序。然后，转到General > Profiles > watchOS Beta Software Profile。点击删除个人资料(Remove Profile)。
使用 Apple Watch 删除 Beta 配置文件(Remove Beta Profile Using Apple Watch)
按下 Apple Watch 上的Digital Crown并前往Settings > General > Profiles > watchOS Beta Software Profile。
向下滚动并点击删除个人资料(Remove Profile)。
抹掉 Apple Watch
如果您遇到以下任何一种情况，您必须擦除 Apple Watch 上的内容和设置(erase the content and settings on your Apple Watch)并从头开始设置：
- 您无法使用 iPhone取消配对Apple Watch 。
- 上述修复均未修复卡住的Apple徽标问题。
- 上面的修复有所帮助，但问题不断出现。
您可以使用 iPhone 的Watch应用程序或 watchOS 中的重置(Reset)设置（如果您可以设法启动它甚至短暂）来擦除Apple Watch。如果两个选项都失败，您可以强制重启并将设备恢复为出厂默认设置。
注意：(Note:)如果您没有Apple Watch的备份，您的数据将会丢失。首先取消配对Apple Watch来(Apple Watch)备份(Back)您的数据（如果您还没有尝试过）。
使用 iPhone 擦除 Apple Watch(Erase Apple Watch Using iPhone)
在 iPhone 上打开Watch应用程序。然后，轻点“通用”(General ) > “重置(Reset )”，然后轻点“抹掉 Apple Watch 内容和设置”(Erase Apple Watch Content and Settings)。
使用 Apple Watch 直接擦除(Erase Directly Using Apple Watch)
按下 Apple Watch 的Digital Crown表冠，然后前往“设置”(Settings ) > “通用(General )” > “重置(Reset)” 。然后，点击删除所有内容和设置(Erase All Content and Settings)。
强制重启和抹掉 Apple Watch(Force-Restart and Erase Apple Watch)
同时按住 Apple Watch 的数字表冠(Digital Crown )和侧边(Side )按钮长达 10 秒。然后，立即按住侧边(Side )按钮 20 秒。
在接下来显示的“删除所有内容和设置”(Erase All Content and Settings)屏幕上，点击“重置(Reset)” 。
Apple Watch：超越 Apple 标志
强制重启Apple Watch可能有助于立即解决卡住的Apple标志问题。如果没有，其余的建议应该已经解决或防止问题重复发生。
但是，如果没有任何效果，您可能正在处理硬件级别的缺陷。联系 Apple(Contact Apple)进行维修或更换。
How to Fix an Apple Watch Stuck on Apple Logo
Іs yoυr Apple Watch continuously stuck at the Apple logo? Various software-related reasons—such aѕ bugs, glitches, аnd corrupt sуstem settings—can cause that to happen. But don’t freak out. In most cases, that’s an issuе you can fix quicklу.
Work your way through the list of troubleshooting tips that follow, and you should be able to push your Apple Watch past the Apple logo and into watchOS.
Force-Restart Apple Watch
Force-restarting (or hard resetting) your Apple Watch can help resolve minor technical problems preventing the device from working.
To perform a force-restart, press and hold the Apple Watch’s Digital Crown and Side button at the same time for up to 10 seconds.
The Apple logo should disappear and reappear in the meantime. Hopefully, you’ll see the watch face soon after.
Recharge and Force-Restart
If force-restarting resulted in the Apple Watch getting stuck at the Apple logo again, try recharging the device for 5-10 minutes. Then, perform another force-restart without disconnecting it from its charger.
Did that work? If not, move on with the rest of the fixes.
Play Sound Using Find My
An odd fix that can sort out the Apple Watch’s stuck Apple logo issue involves using the iPhone’s Find My app to “locate” the device.
Start by loading the Find My app on your iPhone. Then, switch to the Devices tab, pick your Apple Watch, and tap Play Sound.
If the Apple logo continues to display on the screen of your Apple Watch, force-restart the device and tap Play Sound on the Find My app once more.
Unpair Apple Watch From iPhone
Unpairing a stuck Apple Watch from your iPhone is another fix that can help. But, the procedure reverts the watchOS device to factory settings and erases all personal data.
The unpairing process does create a backup of the Apple Watch to your iPhone. But since the watchOS device is stuck, that may or may not happen. In case you already don’t have a previous backup at hand, you risk losing your data permanently.
Should you want to go ahead, start by opening the iPhone’s Watch app. Then, select All Watches, tap the Info icon next to the Apple Watch, and select Unpair Apple Watch.
If that allowed the Apple Watch to boot into watchOS, go through the pairing process again to connect it to your iPhone.
In case you run into issues unpairing your Apple Watch, try erasing all content and settings on the device instead. Scroll down to the final troubleshooting sections for the instructions.
Drain Battery & Restart
If your Apple Watch continues to get stuck at the Apple logo, try draining out the battery. But that could take up to 10 hours or more depending on the charge remaining.
Once the battery discharges (as in, you don’t see the Apple logo anymore), confirm by pressing and holding the Side button. If nothing shows up on the screen, connect the Apple Watch to its charger. It should start automatically once it has recharged sufficiently.
Update Apple Watch
If the fixes above helped, you must consider updating your Apple Watch immediately. That should eliminate known bugs and minimize the chances of the problem recurring in the future. Before you go ahead, connect the watchOS device to its charger.
Update Apple Watch Using iPhone
Bring up the Watch app on your iPhone. Then, go to General > Software Update. If you see an update listed, tap Download and Install.
Update Directly Using Apple Watch
Press your Apple Watch’s Digital Crown. Then, tap Settings and go to General > Software Update.
If you see an update listed, tap Download and Install.
Fall Back to Stable Channel
Have you enrolled your Apple Watch in the Apple Beta Software Program? watchOS betas are generally unstable and introduce many issues. If the device continues to get stuck at the Apple logo, it’s a good idea to fall back to the stable channel.
Remove Beta Profile Using iPhone
Open the Watch app on your iPhone. Then, go to General > Profiles > watchOS Beta Software Profile. Tap Remove Profile.
Remove Beta Profile Using Apple Watch
Press the Digital Crown on your Apple Watch and go to Settings > General > Profiles > watchOS Beta Software Profile.
Scroll down and tap Remove Profile.
Erase Apple Watch
Should you encounter any of the scenarios below, you must erase the content and settings on your Apple Watch and set it up from scratch:
- You can’t unpair your Apple Watch using your iPhone.
- None of the fixes above fixed the stuck Apple logo issue.
- The fixes above helped, but the problem keeps recurring.
You can use your iPhone’s Watch app or the Reset settings in watchOS (if you can manage to boot into it even briefly) to erase an Apple Watch. If both options fail, you can force-restart and restore the device to factory defaults.
Note: If you don’t have a backup of your Apple Watch, you’ll lose your data. Back up your data by unpairing your Apple Watch first (if you haven’t tried that already).
Erase Apple Watch Using iPhone
Open the Watch app on your iPhone. Then, tap General > Reset and tap Erase Apple Watch Content and Settings.
Erase Directly Using Apple Watch
Press your Apple Watch’s Digital Crown and go to Settings > General > Reset. Then, tap Erase All Content and Settings.
Force-Restart and Erase Apple Watch
Hold down both the Apple Watch’s Digital Crown and Side button simultaneously for up to 10 seconds. Then, immediately press and hold the Side button only for 20 seconds.
On the Erase All Content and Settings screen that shows up next, tap Reset.
Apple Watch: Beyond the Apple Logo
Performing a force-restart of your Apple Watch probably helped resolve the stuck Apple logo issue straightway. If not, the rest of the suggestions should’ve fixed or prevented the problem from repeating.
But, if nothing worked, you could be dealing with a defect at the hardware level. Contact Apple for repairs or a replacement.
