iPad 是一项令人难以置信的技术。它可以用作便携式计算机、平板电脑,甚至是游戏机——当它工作时。不幸的是,有时 iPad 无法正确启动并最终卡在Apple标志上。以下是解决该特定问题的方法。
在大多数情况下,iPad 卡在Apple徽标屏幕上是由于启动过程中的一个过程。这可能是由第三方应用程序甚至错误的安全软件引起的。好消息是,通常有一个修复程序。本文中的说明适用于最近两代的 iPad。
确保(Make)它不是软件更新(Software Update)
你的 iPad 是卡住了,还是只是暂时的?如果您的 iPad 在Apple(Apple)徽标下方显示进度条,则表示正在安装某些东西,很可能是操作系统的更新。
如果 iPad 没有超出Apple标志并且您看到进度条,请给它时间来完成。更新完成后,iPad 将重新启动或继续前进。如果没有,请尝试下一步。
执行硬重置
纠正 iPad 任何问题的第一步是尝试硬重置(attempt a hard reset)。有几种不同的方法可以做到这一点。
如果您的iPad 没有 Home 按钮(iPad does not have a Home button)(如 iPad Pro),则您可以通过按(Pro–then)增大音量(Volume Up )按钮、减小音量(Volume Down )按钮、然后按住电源(Power)按钮直到设备重新启动 来执行硬重置。
如果您的 iPad 有Home按钮,请同时按住Home和Top(或Side)按钮,直到看到Apple标志。
清洁闪电端口
如果您的 iPad 在连接到计算机时卡在Apple标志上,可能是由于意外的罪魁祸首:闪电端口(lightning port)。如果棉绒、碎屑或其他材料隐藏在闪电端口内并阻碍电缆进行安全连接,则 iPad 可能无法超越Apple标志。
这也可以阻止您的 iPad 充电。你有几个选项来纠正它。首先是用干净的软毛牙刷之类的东西清洁闪电端口的内部,但这有时会迫使材料更深地进入端口。
另一种选择是在亚马逊附近购买便宜的清洁工具(Amazon)包(cheap cleaning kit)。这些套件易于使用(与Apple Store中任何人用来清洁端口的工具基本相同)。只需刮掉材料并保持闪电端口清洁即可。
在恢复模式下(Recovery Mode)执行系统更新(System Update)
如果您的 iPad 继续贴在Apple标志上,您可能需要通过将设备置于恢复模式来执行手动更新。这样做的第一步实际上是了解如何将 iPad 置于恢复模式(Recovery Mode)。
首先,确保您的Mac 完全是最新的(Mac is completely up to date)。如果您使用的不是Mac,请确保您拥有最新版本的 iTunes。
接下来,打开Finder或 iTunes。如果您已经打开了 iTunes,请将其关闭并再次打开。
最后,将 iPad 连接到计算机并将其置于恢复模式(Recovery Mode)。如果您的 iPad 没有主(Home)屏幕按钮,请按下并松开提高音量(Volume Up)按钮,然后松开音量降低(Volume Down)按钮,然后按住顶部(Top )按钮,直到 iPad 进入恢复模式(Recovery Mode)。
如果您的 iPad 有主(Home)屏幕按钮,请同时按住主(Home)屏幕按钮和侧边(Side)或顶部(Top)按钮,直到 iPad 进入恢复模式(Recovery Mode)。
完成此操作后,在Finder或 iTunes 中找到您的 iPad。当您选择它时,您将获得更新(Update )或恢复(Restore)的选项。选择更新。(Update.)这将允许您的计算机为您的设备下载最新的更新并安装它们,很可能不会删除您的数据(我们说“最有可能”,因为总是存在风险。)
此过程完成后,断开您的 iPad 并尝试启动它。
将 iPad 置于 DFU 模式
如果以上步骤都不起作用,您可以尝试DFU模式。这是 iPad 拥有的最深入的故障排除功能。以下是如何设置它。
将 iPad 连接到计算机并打开Finder或 iTunes,就像激活恢复模式(Recovery Mode)一样。同时按下(Press)主页(Home )按钮和电源(Power )按钮,直到屏幕变黑。
(Wait three)在屏幕变黑后等待三秒钟,然后松开电源(Power )按钮,但继续按住主(Home)屏幕按钮,直到您的 iPad 出现在Finder或 iTunes 中。
如果屏幕不是全黑,或者您无法在 iTunes 或Finder中找到您的设备,则表示该过程无法正常工作。好消息是,如果它没有立即工作,您可以立即重新启动该过程。
如果您的 iPad 没有Home Button,则该过程略有不同。关闭(off)iPad并将其插入计算机,然后打开 iTunes 或Finder。
接下来,按住电源(Power )按钮。等待几秒钟,然后在不松开电源按钮的情况下按下(Power)降低音量(Volume Down)按钮。按住它们十秒钟以进入DFU模式。
当 iPad 进入DFU模式时,您的计算机上会出现一个弹出窗口,提醒您检测到 iPad 处于DFU模式。单击“(Click) 确定(Okay)”并在屏幕中移动,直到您获得“还原和更新”选项。(Restore and Update.)
该过程将删除您 iPad 上的所有内容,并自动将最新版本的 iOS 下载到您的 iPad。之后,它将尝试将所有已擦除的内容恢复回设备。
也就是说,您应该在尝试此步骤之前手动备份您的 iPad 。(manually back up your iPad)您可能会丢失所有数据。
这些步骤可以帮助您纠正导致 iPad 卡在Apple标志上的任何问题。如果它们都不起作用,您应该考虑将其交给专业人士进行评估和维修。如果您已经采取了所有可能的步骤,但没有任何效果,请让Apple处理它。
How to Fix an iPad Stuck on Apple Logo
The iPad is an incredible piece of tеchnology. It works as а pоrtable computer, a tablet, and even a gaming machine—when it works. Unfortunately, there arе times when the iPad doesn’t boot correctly and ends υp stuck on the Aрple logo. Here’s how to fіx that particular іssue.
In most cases, the iPad gets stuck on the Apple logo screen due to a process with the boot process. This can be caused by third-party applications or even faulty security software. The good news is, there’s usually a fix. The instructions within this article will pertain to the most recent two generations of the iPad.
Make Sure It’s Not a Software Update
Is your iPad stuck, or is it just temporary? If your iPad displays a progress bar underneath the Apple logo, then it means something is being installed, most likely an update to the operating system.
If the iPad doesn’t progress beyond the Apple logo and you see a progress bar, give it time to complete. Once an update finishes, the iPad will either restart or proceed forward. If it doesn’t, try the next step.
Perform a Hard Reset
The first step to correcting any problem with an iPad is to attempt a hard reset. There are a couple of different ways to do this.
If your iPad does not have a Home button–like the iPad Pro–then you perform a hard reset by pressing the Volume Up button, then the Volume Down button, and then pressing and holding the Power button until the device restarts.
If your iPad does have a Home button, press and hold the Home and Top (or Side) buttons at the same time until you see the Apple logo.
Clean the Lightning Port
If your iPad gets stuck on the Apple logo when connecting to your computer, it’s possibly due to an unexpected culprit: the lightning port. If lint, debris, or other material is hiding inside the lightning port and blocking the cable from making a secure connection, the iPad might not progress beyond the Apple logo.
This can also stop your iPad from charging. You have a few options for how to correct it. The first is to take something like a clean, soft-bristled toothbrush and clean the interior of your lightning port, but this can sometimes force the material deeper into the port.
The other option is to invest in a cheap cleaning kit off Amazon. These kits are easy to use (and basically identical to what anyone at the Apple Store would use to clean the port.) Just scrape out the material and keep the lightning port clear.
Perform a System Update in Recovery Mode
If your iPad continues to stick on the Apple logo, you may need to perform a manual update by placing the device into recovery mode. The first step to doing this is actually understanding how to place the iPad into Recovery Mode.
First, make sure your Mac is completely up to date. If you aren’t using a Mac, make sure you have the latest version of iTunes.
Next, open Finder or iTunes. If you already had iTunes open, close it and open it again.
Finally, connect your iPad to your computer and put it into Recovery Mode. If your iPad does not have a Home button, press and release the Volume Up button, then the Volume Down button, and then press and hold the Top button until the iPad enters Recovery Mode.
If your iPad does have a Home button, press and hold the Home button and the Side or Top buttons at the same time until the iPad enters Recovery Mode.
Once you have done this, find your iPad within Finder or in iTunes. When you choose it, you will be given the option to Update or Restore. Choose Update. This will allow your computer to download the most recent updates for your device and install them, most likely without deleting your data (we say “most likely” because there is always a risk.)
Once this process is complete, disconnect your iPad and try to start it up.
Place Your iPad in DFU Mode
If the above steps did not work, you can try DFU mode. This is the most in-depth troubleshooting feature the iPad has. Here’s how to set it up.
Connect your iPad to your computer and open Finder or iTunes, like you would for activating Recovery Mode. Press both the Home button and the Power button until the screen turns black.
Wait three seconds after the screen has turned black and release the Power button, but continue holding down the Home button until your iPad appears within Finder or in iTunes.
If the screen isn’t completely black or you can’t find your device within iTunes or Finder, it means the process didn’t work. The good news is that you can restart the process immediately if it didn’t work right away.
If you have an iPad without a Home Button, the process is slightly different. Turn your iPad off and plug it into your computer, and then open iTunes or Finder.
Next, press and hold the Power button. Wait a couple of seconds and then press the Volume Down button without releasing the Power button. Hold them both down for ten seconds to enter DFU mode.
When the iPad enters DFU mode, a pop-up will appear on your computer alerting you that an iPad has been detected in DFU mode. Click Okay and move through the screens until you get the option to Restore and Update.
The process will delete everything on your iPad and automatically download the newest version of iOS to your iPad. Afterwards, it will attempt to restore all of the erased content back to the device.
That said, you should manually back up your iPad before you attempt this step. There is a risk that you could lose all of your data.
These steps can help you correct any issues causing your iPad to get stuck on the Apple logo. If none of them work, you should consider taking it to a professional for evaluation and repair. If you’ve taken every step you can and nothing works, let Apple handle it.