有时,当您运行 Windows 的内置网络疑难解答程序来修复任何 Internet 问题时,您可能会看到一条错误消息,显示“远程设备或资源不接受连接”。发生此错误的原因有多种,其中许多与您的网络设置(your network settings)有关。
由于错误消息没有告诉您需要修复什么,因此您必须依靠多个标准修复来解决该问题。
禁用代理服务器(Disable Proxy Server)
“远程设备不接受连接”错误的可能原因之一是您PC 的代理服务器(PC’s proxy server)。启用代理后,您的网络数据传输方式与禁用代理时不同。
因此,请关闭您 PC 上的代理服务器,看看这是否可以帮助您解决问题。只需单击几下,您就可以随时打开代理服务器。
以下是禁用代理的方法:
- 同时按Windows + R键打开运行框。(Run)
- 在运行(Run)框中键入inetcpl.cpl ,然后按(inetcpl.cpl)Enter。
- 在打开的Internet 属性(Internet Properties)窗口中,选择连接(Connections)选项卡。
- 在连接(Connections)选项卡的底部,选择LAN 设置(LAN settings)按钮。
- 在局域网(Local Area Network)( LAN )设置(Settings)窗口中,禁用为 LAN 使用代理服务器(Use a proxy server for your LAN)选项。然后,选择确定(OK)。
- 在 Internet 属性窗口中选择应用(Apply),然后选择确定。(OK)
重置网页浏览器(Reset Web Browser)
如果您在 Web 浏览器中访问网站时遇到问题,则可能是您的浏览器存在问题(an issue with your browser)。在这种情况下,您可以重置浏览器的设置,看看这是否有助于解决“远程设备不接受连接”问题。
在下面的部分中,使用适用于您的浏览器的部分来重置您的浏览器。
重置 Internet Explorer(Reset Internet Explorer)
- 在您的 PC 上打开Internet Explorer 。
- 选择右上角的设置图标,然后选择Internet 选项(Internet options)。
- 选择高级(Advanced)选项卡,然后选择底部的重置。(Reset)
- 启用删除个人设置(Delete personal settings)选项并选择重置(Reset)。
重置 Microsoft Edge(Reset Microsoft Edge)
- 启动Microsoft Edge。
- 选择右上角的三点菜单,然后选择Settings。
- 从左侧边栏中,选择重置设置(Reset settings)。
- 在右侧选择将设置恢复为默认值。(Restore settings to their default values)
- 在提示中选择重置。(Reset)
重置谷歌浏览器(Reset Google Chrome)
- 在您的 PC 上启动Chrome 。
- 选择右上角的三点菜单,然后选择Settings。
- 从左侧边栏中,选择Advanced。
- 从高级(Advanced)菜单中选择系统。(System)
- 在右侧选择将设置恢复为原始默认值。(Restore settings to their original defaults)
- 在提示中选择重置设置。(Reset settings)
禁用 Windows 防火墙(Disable Windows Firewall)
Windows 的防火墙定义了传入和传出网络连接的工作方式。如果防火墙中有阻止某些连接的规则,则可能会导致您的 PC 显示“远程设备不接受连接”错误。
在这种情况下,请暂时关闭防火墙(turn the firewall off),看看是否能解决问题。您可以随时重新打开防火墙。
- 在您的 PC 上打开控制面板(Open Control Panel on your PC)。一个简单的方法是打开开始(Start)菜单,搜索控制面板(Control Panel),然后在搜索结果中选择控制面板。(Control Panel)
- 在控制面板中选择系统和安全。(System and Security)
- 在以下屏幕上选择Windows Defender 防火墙。(Windows Defender Firewall)
- 从左侧边栏中,选择打开或关闭 Windows Defender 防火墙(Turn Windows Defender Firewall on or off)。
- 在右侧窗格中,激活专用网络设置(Private network settings)和公共网络设置(Public network settings)部分中的关闭 Windows Defender 防火墙(Turn off Windows Defender Firewall)选项。
- 选择底部的确定。(OK)
关闭防病毒软件(Turn Off Antivirus)
当您在 PC 上遇到与网络相关的问题时,您不能排除防病毒软件干扰您的连接的可能性。您的防病毒软件可能会阻止某些连接并导致网络疑难解答显示“远程设备或资源不接受连接”消息。
如果是这种情况,解决问题很容易。您基本上需要做的就是关闭防病毒软件(turn your antivirus off)并查看错误是否仍然存在。如何关闭防病毒程序取决于您使用的程序。
通常,您可以在防病毒程序的主屏幕上找到关闭保护的选项。
如果这不能为您解决问题,请继续使用以下方法。
更新组策略(Update Group Policies)
如果您的网络管理员对组策略进行了更改,则您必须等到这些策略生效。这通常需要大约 90 分钟,但您可以使用 PC 上的命令加快此过程。
通过从命令提示符(Command Prompt)运行命令,您可以立即使任何组策略更改生效。这可能有助于解决您的网络问题。
要做到这一点:
- 打开开始(Start)菜单,搜索命令提示符(Command Prompt),然后选择以管理员身份运行(Run as administrator)。
- 在用户帐户控制(User Account Control)提示中选择是。(Yes)
- 在打开的命令提示符(Command Prompt)窗口中,键入以下命令并按Enter:
gpupdate /force
- 等待(Wait)您的 PC 更新组策略。
- 更新策略后,重新启动您的 PC。为此,请打开“开始(Start)”菜单,选择电源图标,然后选择“重新启动(Restart)” 。
释放和更新 IP 地址(Release and Renew IP Address)
当您遇到诸如“远程设备或资源不接受连接”之类的网络问题时,值得释放并更新您的 PC 的 IP 地址(renewing your PC’s IP address)以可能解决该问题。
释放和更新允许您的 PC 释放其当前 IP 地址,并向路由器的DHCP 服务器(DHCP server)请求新的 IP 地址。作为用户,您只需从Command Prompt运行几个命令,此实用程序将为您处理其余的事情。
- 右键单击开始(Start)菜单图标,然后从打开的菜单中选择命令提示符(管理员)(Command Prompt (Admin))。
- 在用户帐户控制(User Account Control)提示中选择是。(Yes)
- 在命令提示符(Command Prompt)窗口中,键入以下命令并按Enter:
ipconfig /release
- 执行上述命令后,键入以下命令并回车(Enter):
ipconfig /renew
- 关闭命令提示符窗口。
希望(Hopefully)使用上述方法之一,您应该能够修复 PC 上的“远程设备或资源不接受连接”错误并恢复网络活动。
How to Fix the Remote Device Won’t Accept the Connection Error
Sometimеѕ, when yоu run the Windows’ built-in network troubleshooter to fix any іnternet isѕues, you might see an error that says “The remote devіce or resoυrce won’t accept the connection”. There are various reasonѕ this errоr occurs, many of which are related to your network settings.
Since the error message doesn’t tell you what needs fixing, you’ll have to rely on multiple standard fixes to get around the issue.
Disable Proxy Server
One of the possible reasons for the “The remote device won’t accept the connection” error is your PC’s proxy server. When proxy is enabled, your network data gets transmitted differently than it would when proxy is disabled.
Therefore, turn the proxy server off on your PC and see if that helps you get rid of your problem. You can always turn the proxy server on with a few clicks.
Here’s how to disable proxy:
- Open the Run box by pressing Windows + R keys at the same time.
- Type inetcpl.cpl in the Run box and press Enter.
- In the Internet Properties window that opens, select the Connections tab.
- In the Connections tab, at the bottom, select the LAN settings button.
- On the Local Area Network (LAN) Settings window, disable the Use a proxy server for your LAN option. Then, select OK.
- Select Apply and then OK on the Internet Properties window.
Reset Web Browser
If you have trouble accessing websites in your web browser, there might be an issue with your browser. In this case, you can reset the settings for your browser and see if that helps resolve the “The remote device won’t accept the connection” problem.
From the sections below, use the one that’s for your browser to reset your browser.
Reset Internet Explorer
- Open Internet Explorer on your PC.
- Select the settings icon at the top-right corner and choose Internet options.
- Select the Advanced tab and then select Reset at the bottom.
- Enable the Delete personal settings option and select Reset.
Reset Microsoft Edge
- Launch Microsoft Edge.
- Select the three-dots menu at the top-right corner and choose Settings.
- From the sidebar on the left, choose Reset settings.
- Select Restore settings to their default values on the right.
- Select Reset in the prompt.
Reset Google Chrome
- Launch Chrome on your PC.
- Select the three-dots menu at the top-right corner and choose Settings.
- From the sidebar on the left, select Advanced.
- Choose System from the Advanced menu.
- Select Restore settings to their original defaults on the right.
- Choose Reset settings in the prompt.
Disable Windows Firewall
Windows’ firewall defines how your incoming and outgoing network connections should work. If there’s a rule in the firewall that blocks certain connections, that can cause your PC to display the “The remote device won’t accept the connection” error.
In this case, turn the firewall off temporarily and see if that resolves the problem. You can turn the firewall back on whenever you want.
- Open Control Panel on your PC. An easy way to do this is to open the Start menu, search for Control Panel, and select Control Panel in the search results.
- Select System and Security in Control Panel.
- Choose Windows Defender Firewall on the following screen.
- From the sidebar on the left, select Turn Windows Defender Firewall on or off.
- In the pane on the right, activate the Turn off Windows Defender Firewall option in both Private network settings and Public network settings sections.
- Select OK at the bottom.
Turn Off Antivirus
When you experience network-related issues on your PC, you can’t rule out the possibility of your antivirus interfering with your connections. It’s possible your antivirus is blocking certain connections and causing the network troubleshooter to display a “The remote device or resource won’t accept the connection” message.
If this is the case, fixing the issue is easy. All you basically need to do is turn your antivirus off and see if the error persists. How you turn off your antivirus program depends on what program you’re using.
Generally, you can find the option to turn protection off on the main screen of the antivirus program.
If this doesn’t fix the issue for you, continue with the methods below.
Update Group Policies
If your network administrator has made changes to group policies, you’ll have to wait until those policies go into effect. This usually takes about 90 minutes, but you can expedite this process using a command on your PC.
By running a command from Command Prompt, you can bring any group policy changes into effect right away. This might be helpful in fixing your network issue.
To do that:
- Open the Start menu, search for Command Prompt, and select Run as administrator.
- Select Yes in the User Account Control prompt.
- In the Command Prompt window that opens, type the following command and press Enter:
gpupdate /force
- Wait for your PC to update the group policies.
- When the policies are updated, restart your PC. To do this, open the Start menu, select the power icon, and choose Restart.
Release and Renew IP Address
When you encounter network issues like “The remote device or resource won’t accept the connection”, it’s worth releasing and renewing your PC’s IP address to possibly fix the issue.
Releasing and renewing allows your PC to release its current IP address and ask your router’s DHCP server for a fresh new IP address. You, as a user, just have to run a couple of commands from Command Prompt, and this utility will take care of the rest for you.
- Right-click the Start menu icon and choose Command Prompt (Admin) from the menu that opens.
- Select Yes in the User Account Control prompt.
- On the Command Prompt window, type the following command and press Enter:
ipconfig /release
- When the above command is executed, type the following command and press Enter:
ipconfig /renew
- Close the Command Prompt window.
Hopefully, using one of the methods outlined above, you should be able to fix the “The remote device or resource won’t accept the connection” error on your PC and resume your network activities.