PS Remote Play让您可以使用PS5控制器在 PC 上玩PlayStation游戏。(PlayStation)每天都有更多的PC 游戏(PC games)和游戏平台支持DualSense控制器。(DualSense)PS5控制器(controller)也适用于 iPhone( also works on iPhones)、iPad 和 Android 设备。
本教程介绍如何在Mac(Mac)或 PC上使用PS5控制器。在将控制器连接到计算机之前,请关闭PS5控制器。按住PlayStation (PS) 按钮,直到控制器的指示灯或状态灯熄灭。完成后,您可以使用USB电缆或无线方式将控制器连接到计算机。
USB 有线连接
对于有线USB连接,请使用PS5包装中的Type-A转Type-C电缆。如果找不到随附的数据线,请使用支持电力传输和数据同步的第三方 USB 数据线。(third-party USB cable)如果您使用“仅充电”电缆,Windows 或 macOS 将无法检测到您的PS5 DualSense控制器。(PS5 DualSense)
要使其正常工作,您只需将电缆的 USB-A 连接器插入 PC,然后将USB-C连接器插入DualSense控制器的USB-C端口。
注意:对于没有USB Type-A端口的 PC 和MacBook(MacBooks) ,请使用USB-C转USB-C电缆。(USB-C)将电缆的一端插入您的Mac(Plug)或(Mac)PC,另一端插入控制器。
无线连接PS5 DualSense 控制器(PS5 DualSense Controller Wirelessly)
在将控制器与计算机配对之前,请记住(Remember)关闭或断开控制器与其他设备的连接。按住控制器上的 PS 按钮,直到指示灯熄灭。这会将控制器与其他蓝牙(Bluetooth)设备断开连接,并使其可用于与新设备配对。
将PS5 控制器(PS5 Controller)连接到Windows PC
要将PS5 DualSense控制器与Windows 10或 Windows 11 计算机配对,请按照以下步骤操作。
- 在Windows 11上,打开 PC 的设置(Settings)应用程序(按Windows键 + I)。选择侧边栏的蓝牙(Select Bluetooth)和设备,然后选择右侧的
添加设备。(Add)
在Windows 10上,转到Settings > 设备(Devices) > Bluetooth和其他设备,然后选择添加蓝牙(Add Bluetooth)或其他设备。
- 选择蓝牙。
- 下一步是将控制器置于配对模式。按住Playstation按钮和Create按钮约 5 秒钟。当控制器的指示灯闪烁两次时
松开两个按钮。(Release)
- 在您的 PC 上,选择无线控制器(Wireless Controller)。
- 等待(Wait)您的 PC 连接到控制器。当您看到“您的设备已准备就绪”消息时,
选择完成以关闭窗口。(Select Done)
您的控制器应在蓝牙(Bluetooth)设置菜单中显示为“已连接” 。现在您可以在Steam 游戏(Steam games)和其他兼容程序中使用控制器。
将 PS5 控制器连接到 Mac
- 转到System Preferences > Bluetooth并确保蓝牙(Bluetooth)已打开。选择打开蓝牙(Turn Bluetooth)按钮以启用 Mac 的蓝牙(Bluetooth)。
- 按住PS5控制器上的 PS 按钮和(PS5)Create按钮,直到指示灯间歇性闪烁两次。这会将控制器置于配对模式。
- 您的Mac应该会在(Mac)蓝牙(Bluetooth)设置菜单中检测到“DualSense 无线控制器” 。选择连接(Connect)按钮继续。
与Windows不同,macOS 可以正确识别PS5控制器并将其标记为“ DualSense 无线控制器(DualSense Wireless Controller)”。
- 选择选项以自定义DualSense控制器上某些按钮的功能。
默认情况下,按下控制器上的主页(Home)(PS) 按钮会打开 Mac 的Launchpad。
- 您可以将 macOS 配置为在长按控制器的主页(Home)(PS) 按钮时打开浮动应用程序切换器。为此,请打开“主页(Home)长按”下拉菜单并选择LaunchPad。
“分享(Share)”或“创建”按钮也是可定制的。您可以通过双击或长按“分享(Share)”按钮开始录制屏幕或在游戏过程中捕捉“亮点”。捕捉精彩片段可保存游戏的最后 15 秒。
- 展开“共享双击”或“共享长按”菜单,然后选择Start/Stop Recording或捕捉精彩片段(Capture Highlight)。
- 在确认提示中
选择录制屏幕。(Record Screen)
注意:使用DualSense控制器(DualSense)捕捉(Capturing)亮点可能会降低游戏速度和性能。
- 选择完成(Select Done)以保存自定义。
(Set Up)在您的计算机上(Your Computer)设置和使用 PS5 控制器(Use PS5 Controller)
您的计算机和兼容应用程序应立即检测到通过电缆或无线连接的PS5 DualSense控制器。(PS5 DualSense)根据您正在玩的应用程序或 PC 游戏,您可能需要启用特定于应用程序的设置。
例如,在Steam中,启用“PlayStation 配置支持”可让您享受DualSense控制器的所有功能。
- 将控制器连接到您的计算机并打开 Steam 的设置。
- 前往左侧边栏上的“控制器”选项卡,然后选择常规控制器设置(General Controller Settings)。
- 确保您的PlayStation 5 控制器(Controller)出现在“检测到的控制器(Controller)”部分。选中PlayStation 配置支持(PlayStation Configuration Support)复选框并关闭控制器设置窗口。
您还应该选中Generic Gamepad Configuration Support复选框。如果 Steam 的PlayStation 配置支持(PlayStation Configuration Support)出现故障,这可以帮助您的PS5控制器正常工作。
在Remote Play中,您会在屏幕的右下角看到控制器的电池电量。
如果您的PS5控制器无法在特定游戏中运行,请联系游戏开发商寻求支持。
PS5 控制器无法(PS5 Controller)连接或(Connecting)在 PC 或Mac上工作?尝试(Try)这些修复
由于多种原因,您的计算机可能无法识别 PS5 控制器。(computer may fail to recognize a PS5 Controller)下面的故障排除建议应该可以解决问题。
1. 尝试不同的端口或电缆
如果您使用线缆连接控制器,请确保它是PS5包装中随附的原装线缆。如果您使用仿冒或仿冒电缆,您的计算机可能无法检测到DualSense控制器。使用支持数据同步和电力传输的正品电缆。
USB端口问题也会阻止PS5控制器连接到您的计算机。如果控制器在特定端口上不起作用,请尝试在您的计算机上使用不同的端口。我们还建议将控制器直接插入您的计算机。使用USB适配器时,确保配件支持数据同步和电力传输。
2.更新控制器
将控制器更新到最新固件可以解决连接和性能问题。
如果您使用的是Windows PC,请使用DualSense 无线控制器应用程序的固件更新程序更新(Firmware updater for DualSense wireless controller)PS5控制器。在您的计算机上安装应用程序并使用电缆插入控制器。
该应用程序将自动下载并安装适用于您的控制器的任何固件更新。确保(Make)您的计算机具有 Internet 连接。
您还可以从PS5 控制台(PS5 console)更新您的控制器。打开 PS5 的设置菜单,进入Accessories > Controllers,然后选择无线控制器设备软件(Wireless Controller Device Software)。
3.重启你的电脑
如果您的控制器固件是最新的,请重新启动(Reboot)您的计算机,但在玩兼容游戏时它将无法连接或工作。
4.将控制器(Controller)重置为出厂设置(Factory Settings)
如果问题仍然存在,请将PS5 DualSense控制器的设置恢复为出厂默认设置。在执行出厂重置之前,请从控制台或其他设备上断开或拔下控制器。(Disconnect)您还应该关闭控制台。
在控制器背面找到一个小圆形孔。孔内是DualSense控制器的重置按钮。将大头针或回形针插入孔中,然后按下重置按钮 3-5 秒。
打开控制器,将其连接到您的计算机,然后检查它现在是否可以正常工作。
(Enjoy Console-Like Gaming)在您的计算机上(Your Computer)享受类似控制台的游戏
将PS5 DualSense控制器连接到Windows或Mac计算机很容易。如果您在使用控制器时仍有问题,请更新您的计算机操作系统。如果您的DualSense控制器无法连接或无法在其控制台或计算机上工作,请访问PlayStation 服务维修中心。(PlayStation Service Repair Center)
How to Use a PS5 Controller on Your Mac or PC
PS Remote Play lets you play PlayStation games on your PC with a PS5 controller. More PC games and gaming platforms support the DualSense controller every day. And the PS5 controller also works on iPhones, iPads, and Android devices.
This tutorial covers using a PS5 controller on your Mac or PC. Before connecting a controller to your computer, turn off the PS5 controller. Press and hold the PlayStation (PS) button until the controller’s indicator light or status light goes off. When that’s done, you can connect the controller to your computer with a USB cable or wirelessly.
USB Wired Connection
For a wired USB connection, use the Type-A to Type-C cable included in the PS5 packaging. If you can’t find the included cable, use a third-party USB cable that supports power transfer and data synchronization. Windows or macOS won’t detect your PS5 DualSense controller if you use a “charge only” cable.
All you have to do to get it working is plug the cable’s USB-A connector into your PC and insert the USB-C connector into the DualSense controller’s USB-C port.
Note: Use a USB-C to USB-C cable for PCs and MacBooks without a USB Type-A port. Plug either end of the cable to your Mac or PC and the other end to the controller.
Connect the PS5 DualSense Controller Wirelessly
Remember to turn off or disconnect your controller from other devices before pairing it to your computer. Press and hold the PS button on the controller until the indicator light goes off. That disconnects the controller from other Bluetooth devices and makes it available for pairing to a new device.
Connect a PS5 Controller to a Windows PC
To pair a PS5 DualSense controller to a Windows 10 or Windows 11 computer, follow these steps.
- On Windows 11, open your PC’s Settings app (press Windows key + I). Select Bluetooth & devices on the sidebar and then select Add device on the right.
On Windows 10, go to Settings > Devices > Bluetooth & other devices and select Add Bluetooth or other devices.
- Select Bluetooth.
- The next step is putting your controller in pairing mode. Press and hold the Playstation button and Create button for about 5 seconds. Release both buttons when the controller’s indicator light blinks twice.
- On your PC, select Wireless Controller.
- Wait for your PC to connect to the controller. Select Done to close the window when you see a “Your device is ready to go” message.
Your controller should appear as “Connected” in the Bluetooth settings menu. Now you can use the controller in Steam games and other compatible programs.
Connect a PS5 Controller to a Mac
- Go to System Preferences > Bluetooth and make sure Bluetooth is on. Select the Turn Bluetooth On button to enable your Mac’s Bluetooth.
- Press and hold the PS button and Create button on your PS5 controller until the indicator light blinks twice intermittently. That puts the controller in pairing mode.
- Your Mac should detect a “DualSense Wireless Controller” in the Bluetooth settings menu. Select the Connect button to proceed.
Unlike Windows, macOS correctly recognizes and labels the PS5 controller as “DualSense Wireless Controller.”
- Select Options to customize the functionality of some buttons on the DualSense controller.
By default, pressing the Home (PS) button on the controller opens your Mac’s Launchpad.
- You can configure macOS to open the floating app switcher when you long-press your controller’s Home (PS) button. To do so, open the “Home Long Press” drop-down menu and select LaunchPad.
The “Share” or “Create” button is also customizable. You can start recording your screen or capture “highlights” during gameplay by double-pressing or long-pressing the Share button. Capturing a highlight saves the last 15 seconds of gameplay.
- Expand the “Share Double Press” or “Share Long Press” menu and select Start/Stop Recording or Capture Highlight.
- Select Record Screen on the confirmation prompt.
Note: Capturing highlights with the DualSense controller may reduce gameplay speed and performance.
- Select Done to save the customizations.
Set Up and Use PS5 Controller on Your Computer
Your computer and compatible apps should immediately detect a PS5 DualSense controller connected via cable or wirelessly. Depending on the app or PC games you’re playing, you may need to enable app-specific settings.
In Steam, for instance, enabling “PlayStation Configuration Support” allows you to enjoy all features of the DualSense controller.
- Connect the controller to your computer and open Steam’s settings.
- Head to the “Controller” tab on the left sidebar and select General Controller Settings.
- Ensure your PlayStation 5 Controller appears in the “Detected Controller” section. Select the PlayStation Configuration Support checkbox and close the controller settings window.
You should also select the Generic Gamepad Configuration Support checkbox. That could help your PS5 controller work correctly if Steam’s PlayStation Configuration Support malfunctions.
In Remote Play, you’ll see your controller’s battery level in the bottom-right corner of the screen.
If your PS5 controller doesn’t work in a specific game, contact the game developer for support.
PS5 Controller Not Connecting or Working on PC or Mac? Try These Fixes
Your computer may fail to recognize a PS5 Controller for many reasons. The troubleshooting recommendations below should resolve the problem(s).
1. Try A Different Port or Cable
If you’re connecting your controller using a cable, ensure it’s the original cable included in the PS5 packaging. If you use a knockoff or counterfeit cable, your computer may not detect the DualSense controller. Use an authentic cable that supports both data synchronization and power transfer.
USB port problems can also prevent PS5 controllers from connecting to your computer. Try a different port on your computer if the controller doesn’t work on a particular port. We also recommend plugging the controller directly into your computer. When using a USB adapter, ensure the accessory supports data synchronization and power transfer.
2. Update the Controller
Updating your controller to the latest firmware can fix connectivity and performance issues.
If you’re using a Windows PC, update the PS5 controller using the Firmware updater for DualSense wireless controller app. Install the app on your computer and plug the controller using a cable.
The app will automatically download and install any firmware update available for your controller. Make sure your computer has an internet connection.
You can also update your controller from the PS5 console. Open your PS5’s settings menu, go to Accessories > Controllers, and select Wireless Controller Device Software.
3. Restart Your Computer
Reboot your computer if your controller’s firmware is up-to-date, but it won’t connect or work when playing compatible games.
4. Reset the Controller to Factory Settings
If the problem persists, restore your PS5 DualSense controller’s settings to factory default. Disconnect or unplug the controller from your console or other devices before performing the factory reset. You should also shut down your console.
Locate a tiny circle-shaped hole on the back of the controller. Inside the hole is the DualSense controller’s reset button. Insert a pin or paper clip in the hole and push the reset button for 3-5 seconds.
Turn on the controller, connect it to your computer, and check if it now works without any issue.
Enjoy Console-Like Gaming on Your Computer
Connecting a PS5 DualSense controller to a Windows or Mac computer is easy. Update your computer’s operating system if you still have problems using the controller. Visit a PlayStation Service Repair Center if your DualSense controller won’t connect or work on its console or computer.