你(Did)忘记了你的 iPhone 密码吗?您的 iPhone 是否因为您多次输入错误密码而被禁用?您是否正在尝试访问您不记得密码的旧 iPhone ?(access an old iPhone)你有没有想过如果你忘记了密码,你会如何解锁你的 iPhone?
我们将向您展示无需密码或面容 ID(Face ID)解锁 iPhone 的不同方法。您需要Apple Watch或计算机(Mac或Windows)才能使用本教程中的提示。
(Unlock)使用Apple Watch(Your Apple Watch)解锁iPhone
如果您有Apple Watch(Series 3或更新机型),您可以使用它来解锁您的 iPhone,而无需输入密码。为此,您的 iPhone 必须支持Face ID并运行 iOS 14.5 或更高版本。此外,您的Apple Watch必须受密码保护、与您的 iPhone 配对(paired to your iPhone)、靠近您的 iPhone 并启用“手腕检测”。
“使用 Apple Watch解锁”功能使用起来很简单。(Unlock)有关更多信息,请参阅我们关于使用 Apple Watch 解锁 iPhone 的教程(tutorial on unlocking an iPhone using Apple Watch)。设置完成后,请按照以下步骤使用Apple Watch解锁 iPhone 。
- 戴上口罩、太阳镜、滑雪护目镜或任何遮盖嘴巴、鼻子或眼睛的配饰。
- 确保您的 iPhone 和Apple Watch已打开蓝牙(Bluetooth)和Wi-(Wi-Fi) Fi——“使用Apple Watch解锁(Unlock)”功能不需要互联网连接。
- 将Apple Watch 戴(Apple Watch)在手腕上并解锁。
- 抬起您的 iPhone 并看一眼锁定屏幕(Lock Screen),无需密码即可解锁设备。
注意:您只能使用Apple Watch从锁定屏幕(Lock Screen)解锁您的 iPhone 。“使用Apple Watch解锁(Unlock)”功能无法解锁应用或验证应用内支付。
蓝牙(Bluetooth)问题、过时的系统软件和其他问题可能会影响“使用Apple Watch解锁(Unlock)”功能。重新启动或更新您的设备应该让您的Apple Watch开始解锁您的 iPhone。有关更多故障排除解决方案,
请参阅我们的修复 Apple Watch 解锁问题(fixing Apple Watch unlock issues)的教程。
擦除或恢复出厂设置 iPhone
如果您没有兼容的Apple Watch ,则无法使用(Apple Watch)Apple Watch解锁您的 iPhone 。或者,如果您在忘记 iPhone 密码之前没有设置“使用Apple Watch解锁”。(Unlock)将 iPhone 恢复为出厂默认设置是无需密码即可解锁的唯一替代方法。
将 iPhone 恢复出厂设置将删除 iPhone 的数据——设置、图片、视频、文档等。如果您在忘记密码之前备份了 iPhone(backed up your iPhone) ,则可以取回已删除的数据。否则,设置和内容将无法恢复。
有多种方法可以擦除 iPhone 或将其恢复为出厂设置(erase or restore an iPhone to factory settings)。您可以在电脑上或通过 iCloud 网站远程重置 iPhone。
使用 iTunes 或 Finder 抹掉你的 iPhone
使用USB(USB)数据线将锁定的 iPhone 连接到您的计算机,然后打开 iTunes(在Windows中)或Finder(在 macOS 中)。此外,断开所有无线配件(耳机、AirPods等)与 iPhone 的连接,然后按照以下步骤进入恢复模式(Recovery Mode)。
- iPhone 8 机型、iPhone SE(第 2 代)和配备面容 ID(Face ID)的 iPhone :按下并松开提高音量按钮。接下来(Next),按下并释放降低音量按钮(Down)。最后,按住侧面(Side)按钮 10-15 秒。当您的 iPhone 显示恢复页面时,
松开侧边按钮。(Side)
- iPhone 7 机型或 iPod touch(第 7 代):按住侧边(Side)(或顶部)按钮和(Top)降低(Down)音量按钮,直到出现恢复模式屏幕。
- 旧款 iPhone 和 iPod touch:按住主(Home)屏幕按钮和侧面(Side)(或顶部(Top))按钮,直到您的设备启动恢复模式屏幕。
您的计算机应该会在恢复模式下(Recovery Mode)检测到您的 iPhone并显示恢复选项。选择“恢复(Select Restore)iPhone”,在弹出的窗口中
选择“恢复(Restore)和更新”,然后按照提示抹掉您的设备。(Update)
iTunes 或Finder将下载您 iPhone 的最新软件或固件包并将其恢复为出厂默认设置。因此(Hence),请确保您的计算机具有 Internet 连接。如果您的 iPhone 退出恢复模式屏幕,请拔下您的 iPhone 并重新启动该过程。
从Web 浏览器(Web Browser)中删除您的 iPhone
如果您没有个人电脑,您可以通过 iCloud.com 从另一台设备远程擦除您的 iPhone。
- 在任何网络浏览器上打开iCloud 网络门户。(iCloud web portal)为您要抹掉的 iPhone
登录同一个Apple ID或 iCloud 帐户。(Apple ID)
- 选择查找 iPhone。
- 打开所有(All) 设备(Devices)下拉菜单并在设备列表中选择您的 iPhone。
- 选择抹掉 iPhone。
- 在确认弹出窗口中
选择擦除以远程擦除您的 iPhone。(Erase)
重新访问您的 iPhone
如果 iPhone 上启用了“查找我的 iPhone”或激活锁(Activation Lock),您必须提供您的Apple ID密码才能重新激活 iPhone。如果在将 iPhone 恢复出厂设置后仍提示您输入密码,
请联系 Apple 支持(Contact Apple Support)或访问Apple Store 。
How to Unlock an iPhone without Passcode or Face ID
Did you forget your iPhone passcode? Is your iPhone disabled becauѕe you entered incorrect pаsscоdеs too mаny times? Are you trying to access an old iPhone whose passcode you can’t remember? Do you ever wonder how you’d unlock your iPhone if you forgot the passcode?
We’ll show you different ways to unlock an iPhone without a passcode or Face ID. You’ll need an Apple Watch or a computer (Mac or Windows) to use the tips in this tutorial.
Unlock iPhone With Your Apple Watch
If you have an Apple Watch (Series 3 or newer), you can use it to unlock your iPhone without entering a passcode. To do this, your iPhone must support Face ID and run iOS 14.5 or later. Additionally, your Apple Watch must be passcode-protected, paired to your iPhone, close to your iPhone, and have “wrist detection” enabled.
The “Unlock with Apple Watch” feature is straightforward to use. For more information, refer to our tutorial on unlocking an iPhone using Apple Watch. Once set up, follow the steps below to unlock your iPhone using your Apple Watch.
- Wear a mask, sunglasses, ski goggles, or any accessory that covers your mouth, nose, or eye.
- Ensure your iPhone and Apple Watch have Bluetooth and Wi-Fi turned on—the “Unlock with Apple Watch” feature doesn’t require an internet connection.
- Keep your Apple Watch on your wrist and unlocked.
- Raise your iPhone and glance at the Lock Screen to unlock the device without a passcode.
Note: You can only use your Apple Watch to unlock your iPhone from the Lock Screen. The “Unlock with Apple Watch” feature can’t unlock applications or authenticate in-app payments.
Bluetooth problems, outdated system software, and other issues could affect the “Unlock with Apple Watch” feature. Restarting or updating your devices should get your Apple Watch to start unlocking your iPhone. Refer to our tutorial on fixing Apple Watch unlock issues for more troubleshooting solutions.
Erase or Factory Reset the iPhone
You cannot unlock your iPhone with an Apple Watch if you don’t have a compatible Apple Watch. Or, if you didn’t set up “Unlock with Apple Watch” before forgetting your iPhone’s passcode. Restoring your iPhone to factory default is the only alternative way to get it unlocked without a passcode.
Factory resetting your iPhone will erase your iPhone’s data—settings, pictures, videos, documents, etc. You could get back deleted data if you backed up your iPhone before forgetting the passcode. Otherwise, the settings and content are irrecoverable.
There are several ways to erase or restore an iPhone to factory settings. You can reset an iPhone on a computer or remotely through the iCloud website.
Erase Your iPhone using iTunes or Finder
Connect the locked iPhone to your computer with a USB cable and open iTunes (in Windows) or Finder (in macOS). Also, disconnect all wireless accessories (headphones, AirPods, etc.) from your iPhone and follow the steps below to enter Recovery Mode.
- iPhone 8 models, iPhone SE (2nd generation), and iPhones with Face ID: Press and release the Volume Up button. Next, press and release the Volume Down button. Finally, press and hold the Side button for 10-15 seconds. Release the Side button when your iPhone displays the recovery page.
- iPhone 7 models or iPod touch (7th generation): Press and hold the Side (or Top) button and Volume Down button until the recovery mode screen appears.
- Older iPhone models and iPod touch: Press and hold the Home button and Side (or Top) button until your device boots the recovery mode screen.
Your computer should detect your iPhone in Recovery Mode and display restore options. Select Restore iPhone, choose Restore and Update on the pop-up, and follow the prompt to erase your device.
iTunes or Finder will download your iPhone’s latest software or firmware package and restore it to factory default. Hence, ensure your computer has an internet connection. If your iPhone exits the recovery mode screen, unplug your iPhone and restart the process.
Erase Your iPhone from a Web Browser
If you don’t have a personal computer, you can remotely erase your iPhone from another device via iCloud.com.
- Open the iCloud web portal on any web browser. Sign in to the same Apple ID or iCloud account for the iPhone you want to erase.
- Select Find iPhone.
- Open the All Devices drop-down menu and select your iPhone on the list of devices.
- Select Erase iPhone.
- Select Erase on the confirmation pop-up to remotely wipe your iPhone.
Regain Access to Your iPhone
If “Find My iPhone” or Activation Lock is enabled on the iPhone, you must provide your Apple ID password to reactivate the iPhone. Contact Apple Support or visit an Apple Store if you’re still prompted for a passcode after factory resetting your iPhone.