Razer Synapse是一款基于云的Razer外设管理器。它具有大量简洁的功能，其中包括可让您自定义所有Razer 硬件的配置器。为了增强Razer(Razer)生态系统的功能，您可以使用宏命令对每个键盘或鼠标按钮进行编程。您还可以创建自定义的复杂宏，通过按游戏键盘上的组合键即可使用这些宏。
当您通过Razer Synapse 3(Razer Synapse 3)创建宏时，它们将存储在云端。这意味着无论您身在何处，都可以像在家一样使用相同的宏。它还允许您与其他使用Razer(Razer)外设的人共享您的设置，或将其他人的宏导入到您的Razer Synapse软件中。
即使您用新的Razer产品替换旧的(Razer)Razer鼠标和键盘，您也可以轻松访问它们。只需按照本文中的教程操作，您将立即了解如何创建、分配和删除Razer Synapse宏。(Razer Synapse)
什么是宏？
简而言之(Simply)，宏是一个脚本，当使用键盘快捷键（或鼠标快捷键）激活时，它会执行一个动作或一系列动作。这意味着您可以分配一个按钮或一系列按钮来执行通常需要多次击键或单击鼠标才能完成的操作。这对于需要经常使用重复击键的人来说非常有帮助。它可以帮助他们更快地完成工作，或者更好地玩游戏。
当您需要在计算机上执行长时间且重复的任务时，可以使用宏。您无需执行一系列操作，只需按一个键或宏键组合即可快速、轻松地完成操作。
添加宏模块
在Razer Synapse(Razer Synapse)中配置宏之前，您必须添加宏模块(Macro Module)。有可能你已经拥有了。如果这样做，您将在Synapse(Synapse)顶部工具栏找到“宏”(Macro)选项。
但如果您刚刚安装了Synapse，则可能必须先安装宏(Macro)模块。就是这样：
- 从仪表板中选择模块。
- 向下滚动直到找到宏。
- 将鼠标放在其上并单击“添加”(Add)按钮。
- 选择安装并重置选项。
宏模块(Macro Module)将添加到您的工具栏中。您现在可以轻松访问它。
创建 Razer Synapse 宏
现在您已将宏模块(Macro Module)添加到Razer Synapse仪表板，您可以开始创建一些键盘或鼠标宏。为此，您必须确保Razer Synapse 3兼容产品已插入您的 PC。然后：
- 打开 Razer Synapse 雷云。
- 从顶部工具栏中选择宏。
- 单击(Click)左上角侧边栏的
加号(Plus)图标(+)。
- 您会注意到宏 1(Macro 1)是在下面创建的。这是默认名称，描述性不强。您可以单击它来更改其名称。
- 要保存新名称，请单击其旁边的复选标记。
- 选择这个新创建的宏开始添加输入序列。
- 转到“录制”(Record)并单击旁边的小向下箭头以打开下拉菜单。
- 您必须设置延迟功能和(Delay)鼠标移动(Mouse Movement)的记录。录制延迟意味着默认情况下， (Record Delay)Razer Synapse开始录制宏之前会有三秒的延迟。您可以添加更多秒数，或完全消除延迟。这给了你足够的时间做好准备。
- 当您准备好录制宏时，选择“录制”(Record)。
- 按下(Press)Razer键盘或鼠标上的按键，这些击键将会被记录下来。
- 完成后，单击“停止”(Stop)结束录制会话。
您的宏将自动保存在Razer Synapse中。创建宏后，您必须将其分配给任何支持Razer Synapse 的(Razer Synapse)外设。
创建宏的另一种方法是插入它，而不是记录它。执行此操作的步骤是相同的，直到记录(Record)点。要插入宏：
- 转到插入。
- (Select)从下拉菜单中选择一个操作。如果您想创建按键(Keystroke)宏、鼠标按钮(Mouse Button one)、键入文本(Type Text)或运行命令(Run Command)。
- 在右侧面板上，找到“属性”(Properties)。您将在此处输入宏函数，并且可以设置初始化下一个操作之前的延迟。
您的宏将自动保存，然后您可以继续将其分配给Razer Synapse 3 兼容设备。
分配 Razer Synapse 宏
现在您已在Razer Synapse(Razer Synapse)中创建了宏，您可以将其分配给Razer设备。请记住，您必须先将支持Razer Synapse的键盘或鼠标插入计算机，然后才能执行此操作。
请按照以下步骤分配宏：
- 打开 Razer Synapse 雷云。
- 选择您想要分配宏的设备。
- 选择您想要为其分配宏的按键。
- 从左侧边栏菜单中选择“宏”(Macro)。
- 找到分配宏(Find Assign Macro)并单击它以打开下拉菜单。选择您要分配的宏。
- 在“播放”(Playback)选项下，您可以设置宏操作的播放方式。选择适合您需求的选项。
- 完成后，单击“保存”(Save)按钮。
就是这样！您的宏已分配给特定按钮。您可以继续按照您的意愿使用它。
编辑 Razer Synapse 宏
您可以随时编辑您创建和分配的Razer宏。(Razer)这允许您调整它们的功能或播放速度。您对宏所做的任何更改都会自动保存，并且您无需重新分配按键绑定。
以下是编辑宏的方法：
- 打开 Razer Synapse 软件。
- 转到工具栏中的“宏”。
- 从左侧菜单中选择要编辑的宏。
- 选择菜单中的任何操作（事件(Event)）将打开右侧的属性面板。
- 调整(Adjust)属性以更改事件延迟或(Properties)宏的操作。
进行更改后，宏脚本将自动更新，因此您可以立即继续并使用更新版本的宏。
删除 Razer Synapse 宏
您在Razer Synapse中创建和分配的所有宏都可以轻松删除。也许您在创建它时犯了一个错误，或者您根本不再使用它。无论出于何种原因，请按照以下步骤删除宏：
- 启动 Razer Synapse 3 软件。
- 从顶部工具栏中
选择宏。(Macros)
- 在左侧菜单中找到要删除的宏并选择它。
- 单击(Click)宏旁边的三个点。
- 从菜单中
选择删除选项。(Delete)
- (Confirm)出现提示时单击“删除”按钮(DELETE)确认您要删除宏。
这就是在Razer Synapse中创建宏所需的全部操作。使用Razer装备而不利用这个很棒的工具就是浪费了一个很棒的功能。想一想(Think)您在工作或玩游戏时执行的最常见操作，并将其转化为宏。另外，请查看我们关于如何在 Word 中创建宏(how to create a macro in Word)以及如何在 Excel 中录制宏(how to record a macro in Excel)以加快工作流程的文章。
How to Create, Assign, and Delete Macros in Razer Synapse
Razer Synapѕe is a cloud-based manager for your Razer peripherals. It comes with tons of neat features, amоng them the configurator that lets you customize all your Razer hardware. To increase the functionality of your Razer ecoѕystem, you can рrogram each keyboard or mouse button with macro commands. You can alѕo create custom and complex macros that you can use by pressing a combination of keys on your gaming keyboard.
When you create macros through Razer Synapse 3, they’ll be stored in the cloud. That means that no matter where you find yourself, you’ll be able to use the same macros as if you were home. It also allows you to share your settings with other people with Razer peripherals, or to import other people’s macros into your Razer Synapse software.
You’ll also be able to access them easily even if you replace your old Razer mouse and keyboard with new Razer products. Just follow the tutorial in this article and you’ll learn how to create, assign, and delete Razer Synapse macros in no time.
What’s a Macro?
Simply put, a macro is a script that plays an action, or a series of actions, when activated with a keyboard shortcut (or a mouse shortcut). That means that you can assign one button or a sequence of buttons to commit an action for which you would normally need several keystrokes or mouse clicks. This is extremely helpful to people who need to use repetitive keystrokes a lot. It helps them finish their work quicker, or play their games better.
You can use macros when you have long and repetitive tasks to perform on your computer. Instead of you doing a whole sequence of actions, press one key or a combination of macro keys to do it fast and hassle-free.
Adding a Macro Module
Before you can configure macros in Razer Synapse, you’ll have to add the Macro Module. It’s possible you already have it. If you do, you’ll find the Macro option at the top toolbar of Synapse.
But if you just installed Synapse, it’s possible you’ll have to install the Macro module first. Here’s how:
- Select Modules from the dashboard.
- Scroll down until you find Macro.
- Place your mouse over it and click the Add button.
- Select the Install & Reset option.
The Macro Module will be added to your toolbar. You can now access it easily.
Creating a Razer Synapse Macro
Now that you added Macro Module to your Razer Synapse dashboard, you can start creating some keyboard or mouse macros. To be able to do it, you’ll have to make sure your Razer Synapse 3 compatible product is plugged into your PC. Then:
- Open the Razer Synapse.
- Select Macro from the top Toolbar.
- Click the Plus icon (+) at the top left-hand sidebar.
- You’ll notice that Macro 1 was created right underneath. This is a default name, and not very descriptive. You can click on it to change its name.
- To save the new name, click the checkmark next to it.
- Select this newly created macro to start adding the input sequence.
- Go to Record and click the little down arrow next to it to open the drop-down menu.
- You’ll have to set the Delay functions and the recording of Mouse Movement. Record Delay means there’ll be a three-second delay by default before Razer Synapse starts recording your macro. You can add more seconds, or remove the delay altogether. That gives you enough time to prepare yourself.
- When you’re ready to record the macro, select Record.
- Press the keys on your Razer keyboard or mouse and those keystrokes will be recorded.
- When you’re done, click Stop to end the recording session.
Your macro will automatically be saved in Razer Synapse. After the macro is created, you’ll have to assign it to any Razer Synapse-enabled peripheral.
Another way of creating the macro is to insert it, instead of recording it. The steps to do it are the same, until the Record point. To insert the macro instead:
- Go to Insert.
- Select an action from the drop-down menu. If you want to create a Keystroke macro, a Mouse Button one, Type Text, or Run Command.
- On the right-side panel, find Properties. Here you’ll input the macro function, and you can set the delay before the next action is initialized.
Your macro will be automatically saved and then you can proceed to assign it to a Razer Synapse 3-compatible device.
Assigning a Razer Synapse Macro
Now that you created a macro in Razer Synapse, you can assign it to the Razer device. Remember that you have to have a Razer Synapse-enabled keyboard or a mouse plugged into your computer before you can do this.
Follow these steps to assign a macro:
- Open Razer Synapse.
- Select the device you wish to assign the macro to.
- Select the key you want to assign the macro to.
- From the left sidebar menu select Macro.
- Find Assign Macro and click it to open the drop-down menu. Select the macro you want to assign.
- Under the Playback option, you can set how you want the macro’s action to be played back. Select the option that suits your needs.
- Once you’re done, click the Save button.
And that’s it! Your macro is assigned to the specific button. You can go on and use it how you intended to.
Editing a Razer Synapse Macro
You can edit the Razer macros you created and assigned at any point. This allows you to adjust their function or the playback speed. Any change you make to the macro will automatically be saved, and you won’t need to reassign the key bind.
Here’s how you can edit Macros:
- Open the Razer Synapse Software.
- Go to Macro in the toolbar.
- From the left side menu select the macro you want to edit.
- Selecting any action (Event) in the menu will open the properties panel on the right side.
- Adjust the Properties to change the event delay or the action of the macro.
Once you make changes the macro script will be automatically updated, so you can immediately go ahead and use the updated version of the macro.
Deleting Razer Synapse Macro
All macros you create and assign in Razer Synapse can be easily deleted. Perhaps you made a mistake while creating it, or you simply don’t use it anymore. Whatever the reason, follow these steps to delete a macro:
- Launch Razer Synapse 3 software.
- Select Macros from the top toolbar.
- In the left side menu find the macro you want to delete and select it.
- Click the three dots next to the macro.
- Select the Delete option from the menu.
- Confirm you want to delete the macro by clicking the DELETE button when prompted.
And that’s all it takes to create macros in Razer Synapse. Using Razer gear without taking advantage of this awesome tool is a waste of a great feature. Think of the most common actions you perform when you work or play games and turn them into macros. Also, check out our articles on how to create a macro in Word and how to record a macro in Excel to speed up your workflow.
