尽管速度慢、过时且存在安全风险，但您仍然需要Internet Explorer (IE) 来处理无法在现代浏览器中正常运行的旧网站和应用程序。但如果你使用 Microsoft Edge 进行正常的网页浏览^{(use Microsoft Edge for normal web browsing)}，则不必在两者之间不断切换。这是因为后者带有一个集成的Internet Explorer 模式，能够在 IE 的^{(Internet Explorer Mode)}Trident MSHTML引擎中呈现网站。

但是，在您可以使用Microsoft Edge加载旧版 Web 内容之前，您必须激活Internet Explorer 模式^{(Internet Explorer Mode)}。以下说明将引导您了解在运行Windows 10^{(Windows 10)}或 Windows 11的 PC 上设置此模式所需了解的所有内容。

如何在Edge中激活^(Edge)Internet Explorer 模式^{(Internet Explorer Mode)}

Internet Explorer 模式^{(Internet Explorer Mode)}内置于Microsoft Edge的^{(Microsoft Edge)}Chromium版本中。您可以通过深入浏览器的设置^(Settings)页面来激活它。

1.选择窗口右上角的三点图标，打开 Edge 的设置和更多菜单。^{(Settings and more)}然后，选择标记为Settings的选项。

2. 在侧边栏选择默认浏览器^{(Default browser)}。

3. 找到设置^(Settings)页面右侧的Internet Explorer 兼容性部分。^{(Internet Explorer compatibility )}

4. 打开允许以 Internet Explorer 模式重新加载站点^{(Allow sites to be reloaded in Internet Explorer mode)}旁边的下拉菜单，然后选择允许^(Allow)。

5. 选择重新启动^(Restart)。Microsoft Edge将自动重新启动。

Internet Explorer 模式^{(Internet Explorer Mode)}现在在Microsoft Edge中处于活动状态。您可以手动调用它或将浏览器设置为自动将其用于特定网站和页面。

如何在Edge中启用和^(Edge)禁用 Internet Explorer 模式^{(Disable Internet Explorer Mode)}

在Microsoft Edge中启用Internet Explorer 模式后，您可以随时使用^{(Internet Explorer Mode)}Trident MSHTML引擎 手动加载网页或应用程序。

1. 在Edge^(Edge)中加载网页或应用程序。

2. 打开设置和更多^{(Settings and more )}菜单。

3. 在Internet Explorer 模式下^{(Internet Explorer mode)}选择重新加载。

该站点将在Internet Explorer 模式下^{(Internet Explorer Mode)}重新加载。你会在Microsoft Edge地址栏左侧看到熟悉的Internet Explorer徽标，以确认这一点。您单击的链接也将在Internet Explorer 模式下^{(Internet Explorer Mode)}加载，只要它们加载属于同一域的页面。

如果您有其他包含旧内容的选项卡，则必须手动为它们启用Internet Explorer 模式^{(Internet Explorer Mode)}。

如果您想回退到使用Chromium 引擎^{(Chromium engine)}，只需重新打开设置和更多^{(Settings and more )}菜单并选择退出 Internet Explorer 模式^{(Exit Internet Explorer mode)}。或者，只是离开选项卡。

注意：如果您在启用^(Note:)Internet Explorer 模式^{(Internet Explorer Mode)}时遇到问题，您可能需要在 PC 上安装Internet Explorer或Internet Explorer 模式模块。^{(Internet Explorer Mode)}在下方进一步滚动^(Scroll)以获取说明。

如何将站点设置为始终以Internet Explorer 模式^{(Internet Explorer Mode Always)}加载^(Load)

如果您定期与旧网站和应用程序交互，您可以指示Microsoft Edge默认以Internet Explorer 模式加载它们。^{(Internet Explorer Mode)}你有几种方法可以做到这一点。

如果您手动为某个站点启用了Internet Explorer 模式^{(Internet Explorer Mode)}，只需选择地址栏上的Internet Explorer徽标，打开下次以^{(Internet Explorer )}Internet Explorer 模式打开此页面^{(Open this page in Internet Explorer Mode next time)}旁边的开关，然后选择完成^(Done)即可。

或者，您可以通过 Microsoft Edge 的设置^(Settings)页面添加网页URL^(URLs)。

1. 打开设置和更多^{(Settings and more )}菜单并选择设置^(Settings)。

2. 在侧边栏选择默认浏览器^{(Default browser)}。

3. 选择Internet Explorer 模式页面^{(Internet Explorer mode pages)}旁边的添加^{(Add )}按钮。

4. 输入您要在Internet Explorer 模式^{(Internet Explorer Mode)}下默认加载的页面的URL 。

5. 选择添加^(Add)。

6.对您可能要添加的任何其他页面重复步骤3 - 5 。

如何将Internet Explorer 模式按钮^{(Internet Explorer Mode Button)}添加到 Edge

Microsoft Edge允许您将Internet Explorer 模式^{(Internet Explorer Mode)}按钮添加到浏览器工具栏。这使得启用和禁用功能更容易。

1. 打开设置和更多^{(Settings and more )}菜单并选择设置^(Settings)。

2. 选择侧边栏的外观^{(Appearance )}。

3. 向下滚动到自定义工具栏部分，然后打开^{(Customize toolbar )}Internet Explorer 模式按钮^{(Internet Explorer mode button)}旁边的开关。

Internet Explorer 模式^{(Internet Explorer Mode)}按钮现在应该出现在地址栏的右侧。只要您想进入和退出Internet Explorer 模式^{(Internet Explorer Mode)}，就选择它。

如果要删除Internet Explorer 模式^{(Internet Explorer Mode)}按钮，请返回设置^{(Settings )}>外观并禁用^{(Appearance )}Internet Explorer 模式^{(Internet Explorer mode)}旁边的开关。

无法启用Internet Explorer 模式^{(Internet Explorer Mode)}？这是你必须做的

Internet Explorer预装在Windows 10中。但有些 PC 要求您先激活它，然后才能开始使用它。因此，例如，如果您在为网页或应用程序启用Internet Explorer 模式^{(Internet Explorer Mode)}时收到“找不到Internet Explorer ”消息，那么这样做应该会有所帮助。^{(Internet Explorer)}

同样的问题也可能出现在Windows 11中。但是，Microsoft 最新的操作系统并未将Internet Explorer作为单独的应用程序包含在内。相反，它带有一个Internet Explorer 模式^{(Internet Explorer Mode)}模块，您必须将其添加为可选功能。

如何在 Windows 10 中添加 Internet Explorer^{(How To Add Internet Explorer in Windows 10)}

1. 打开开始^{(Start )}菜单并选择设置^(Settings)。

2. 选择应用程序^(Apps)。

3. 选择可选功能^{(Optional features)}。

4. 选择添加功能^{(Add a feature)}。

5. 选中Internet Explorer^{( Internet Explorer)}旁边的框。

6. 选择安装^(Install)。

如何在 Windows 11 中添加 Internet Explorer 模式模块^{(How To Add the Internet Explorer Mode Module in Windows 11)}

1. 打开开始^{(Start )}菜单并选择设置^(Settings)。

2. 选择应用程序^(Apps)>可选功能^{(Optional features)}。

3. 选择查看功能^{(View features)}。

4. 选中Internet Explorer 模式^{(Internet Explorer mode )}旁边的框，然后选择Next。

6. 选择安装^(Install)。

Internet Explorer 模式^{(Internet Explorer Mode)}：二合一体验

Internet Explorer 模式^{(Internet Explorer Mode)}可帮助您将 Web 浏览限制在Microsoft Edge中。即使微软^(Microsoft)在 2022 年年中停止使用Internet Explorer ，你也应该可以使用它。^{(Internet Explorer)}但是，对于在 Edge 的默认Chromium^(Chromium)引擎中运行良好的页面，您必须避免使用该功能。性能和安全性的权衡是不值得的。

也就是说，如果您处于组织环境中，请查看Internet Explorer 模式入门指南^{(Internet Explorer Mode Getting Started guide)}，了解有关设置部署和激活内部和外部站点功能所需的策略的详细信息。

How to Enable Internet Explorer Mode in Edge on Windows 10/11

Despite being slow, outdated, and a security riѕk, yоu stіll neеd Internet Explorer (IE) for older websites and apps that don’t play well with modern browsers. But if you use Microsoft Edge for normal web browsing, you don’t have to keep switching between the two. That’s because the latter comes with an integrated Internet Explorer Mode capable of rendering sites in IE’s Trident MSHTML engine.

However, before you can use Microsoft Edge to load legacy web content, you must activate Internet Explorer Mode. The following instructions will walk you through everything you need to know to set this mode up on a PC running Windows 10 or Windows 11.

How To Activate Internet Explorer Mode in Edge

Internet Explorer Mode comes built into the Chromium version of Microsoft Edge. You can activate it by digging into the browser’s Settings page.

1. Open Edge’s Settings and more menu by selecting the three-dot icon to the top-right of the window. Then, pick the option labeled Settings.

2. Select Default browser on the sidebar.

3. Locate the Internet Explorer compatibility section to the right of the Settings page.

4. Open the pull-down menu next to Allow sites to be reloaded in Internet Explorer mode and select Allow.

5. Select Restart. Microsoft Edge will restart automatically.

Internet Explorer Mode is now active in Microsoft Edge. You can invoke it manually or set up the browser to use it automatically for specific websites and pages.

How To Enable and Disable Internet Explorer Mode in Edge

With Internet Explorer Mode active in Microsoft Edge, you can manually load a web page or app using the Trident MSHTML engine whenever you want. 

1. Load the web page or app in Edge.

2. Open the Settings and more menu.

3. Select reload in Internet Explorer mode.

The site will reload in Internet Explorer Mode. You’ll see the familiar Internet Explorer logo to the left of the Microsoft Edge address bar confirming that. Links that you click on will also load in Internet Explorer Mode, as long as they load pages belonging to the same domain.

If you have other tabs with legacy content, you must enable Internet Explorer Mode for them manually.

If you want to fall back to using the Chromium engine, simply re-open the Settings and more menu and select Exit Internet Explorer mode. Or, just leave the tab.

Note: If you have trouble enabling Internet Explorer Mode, you may have to install Internet Explorer or the Internet Explorer Mode module on your PC. Scroll further below for instructions.

How To Set Sites to Load in Internet Explorer Mode Always

If you interact with older websites and apps regularly, you can instruct Microsoft Edge to load them in Internet Explorer Mode by default. You have a couple of ways to do that.

If you’ve manually activated Internet Explorer Mode for a site, just select the Internet Explorer logo on the address bar, turn on the switch next to Open this page in Internet Explorer Mode next time, and select Done.

Alternatively, you can add the web page URLs via Microsoft Edge’s Settings page.

1. Open the Settings and more menu and select Settings.

2. Select Default browser on the sidebar.

3. Select the Add button next to Internet Explorer mode pages.

4. Enter the URL of a page you want to load in Internet Explorer Mode by default.

5. Select Add.

6. Repeat steps 3–5 for any other pages you might want to add.

How To Add an Internet Explorer Mode Button to Edge

Microsoft Edge lets you add an Internet Explorer Mode button to the browser toolbar. That makes enabling and disabling the functionality easier.

1. Open the Settings and more menu and select Settings.

2. Select Appearance on the sidebar.

3. Scroll down to the Customize toolbar section and turn on the switch next to Internet Explorer mode button.

An Internet Explorer Mode button should now appear to the right of the address bar. Select it whenever you want to enter and exit Internet Explorer Mode.

If you want to remove the Internet Explorer Mode button, head back to Settings > Appearance and disable the switch next to Internet Explorer mode.

Can’t Enable Internet Explorer Mode? Here’s What You Must Do

Internet Explorer comes pre-installed in Windows 10. But some PCs require you to activate it before you can start using it. So, for example, if you receive an “Internet Explorer can’t be found” message while enabling Internet Explorer Mode for a web page or app, doing that should help.

The same issue can also occur in Windows 11. However, Microsoft’s latest operating system doesn’t include Internet Explorer as a separate application. Instead, it comes with an Internet Explorer Mode module that you must add as an optional feature.

How To Add Internet Explorer in Windows 10

1. Open the Start menu and select Settings.

2. Select Apps.

3. Select Optional features.

4. Select Add a feature.

5. Check the box next to Internet Explorer.

6. Select Install.

How To Add the Internet Explorer Mode Module in Windows 11

1. Open the Start menu and select Settings.

2. Select Apps > Optional features.

3. Select View features.

4. Check the box next to Internet Explorer mode and select Next.

6. Select Install.

Internet Explorer Mode: A Two-in-One Experience

Internet Explorer Mode helps you keep your web browsing limited to Microsoft Edge. You should be able to use it, even after Microsoft discontinues Internet Explorer in mid-2022. However, you must refrain from using the functionality for pages that work well in Edge’s default Chromium engine. The trade-off in performance and security is just not worth it.

That said, if you’re in an organizational environment, check out the Internet Explorer Mode Getting Started guide for details on setting up the policies needed to deploy and activate the functionality for internal and external sites.

Related posts

• 如何创建和使用 Windows 10/11 睡眠模式快捷方式

• 如何在 Windows 10/11 中使用 Taskkill 命令

• 在 Internet Explorer 或 Edge 中打印时更改或删除页眉和页脚

• 从 Windows 10/11 中删除 Bloatware 的 4 种简单方法

• 在 Internet Explorer 和 Microsoft Edge 中禁用或关闭 InPrivate 浏览

• 如何减少 Windows Explorer 高 CPU 使用率

• 如何获取，配置和删除Microsoft Edge扩展

• 在Microsoft Edge管理标签的12种方法

• 简单的问题：什么是 SmartScreen 过滤器，它是如何工作的？

• 适用于 Windows 10/11 的最佳天气小部件

• 简单的问题：什么是 cookie，它们有什么作用？

• 如何在Windows 10/11锁定Start Menu layout

• Firefox，Chrome，Edge，Opera或Internet Explorer Make InPrivate or Incognito shortcuts

• 如何在Microsoft Edge使用跟踪预防

• 如何在所有版本的 Windows 中启动到安全模式

• 在 Internet Explorer 中禁用元刷新

• 使用 Miracast 将媒体从 Microsoft Edge 中的网页投射到无线显示器

• 如何在Chrome，Firefox，Edge和Opera中设置代理服务器

• 如何在Microsoft Edge打开和关闭Dark Mode

• 在 Windows 中修复身份不明的网络和没有 Internet